Schneider Electric

Schneider Electric JJA36250U54X Circuit breaker, PowerPacT J, 250A, 3 pole, 600VAC, 25kA, I-Line, Micrologic 6.2E, 80%, ABC

(No reviews yet) Write a Review
SKU:
JJA36250U54X
MPN:
JJA36250U54X
Condition:
New
Device Application:
distribution
Local Signaling:
ready 1 LED green) || alarm 1 LED 90 % Ir orange) || alarm 1 LED 105 % Ir red) || switched off (OFF) 1 trip indicator green)
Operating Altitude:
< 6561.68 ft (2000 m) without derating || 5000 m with derating
Quality Labels:
CE
Eu Rohs Directive:
Compliant with Exemptions
Height:
191 mm
Breaking Capacity Code:
J
Tightening Torque:
25-25 N.m 95-185 mm² (AWG 3/0...350 kcmil)
Environmental Disclosure:
ENVPEP2206032EN
[Ui] Rated Insulation Voltage:
750 V IEC 60947-2
Standards:
UL || CSA || NEMA || NOM-003-SCFI-2000 || IEC 60947-2
Terminal Identifier:
AL250JD
China Rohs Regulation:
Product out of China RoHS scope. Substance declaration for your information.
Pollution Degree:
3 IEC 60947-1
Weight:
2.4 kg
Ambient Air Temperature For Storage:
-50-85°C
Warranty:
18 months
Line Rated Current:
250-250 A
Product Name:
PowerPact J
Long Time Pick-Up Adjustment Range:
0.25...1 x In
[Uimp] Rated Impulse Withstand Voltage:
8 kV IEC 60947-2
[Ue] Rated Operational Voltage:
600 V AC 50/60 Hz IEC 60947-3
Wire Stripping Length:
25 mm
Protection Type:
overload protection || short-circuit protection
Control Type:
toggle
Poles Description:
3P
Phase Connection:
CA
Country of Origin:
United States
Communication Interface:
Modbus || Ethernet
Network Frequency:
50/60 Hz
Breaking Capacity:
100 kA 240 V AC 50/60 Hz UL 489 || 65 kA 480 V AC 50/60 Hz UL 489 || 25 kA 600 V AC 50/60 Hz UL 489 || 20 kA 250 V DC UL 489
California Proposition 65:
WARNING: This product can expose you to chemicals including: DINP, which is known to the State of California to cause cancer, and DIDP, which is known to the State of California to cause birth defects or other reproductive harm. For more information
Mercury Free:
Yes
Utilisation Category:
category A
Number Of Slots:
2 auxiliary switch OF plug-in) || 1 alarm switch SD plug-in) || 1 overcurrent trip switch SDE plug-in) || 1 voltage release MN or MX plug-in)
[Ics] Rated Service Breaking Capacity:
65 kA 220/240 V AC 50/60 Hz IEC 60947-2 || 35 kA 380/440/415 V AC 50/60 Hz IEC 60947-2 || 18 kA 500/525 V AC 50/60 Hz IEC 60947-2 || 20 kA 250 V DC IEC 60947-2 || 20 kA 500 V DC IEC 60947-2
Ambient Air Temperature For Operation:
-25-70°C
Mounting Mode:
I-Line bracket)
Trip Unit Name:
MicroLogic 6.2 E
Mounting Height:
4.5 in
Electrical Connection:
I-Line connection, line || lugs, load
Circuit Breaker Application:
HACR rated
Ip Degree Of Protection:
front cover IP40
Range:
PowerPact
Suitability For Isolation:
yes IEC 60947-2
Net Weight:
2.4 kg
Trip Unit Technology:
electronic, energy, MicroLogic 6.2 E, LSIG
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
$8,772.00

Description

PowerPacT J-Frame circuit breakers are designed to protect electrical systems from damage caused by overloads and short circuits. PowerPacT J-Frame circuit breakers are available with either thermal magnetic or MicroLogic electronic trip protection units. This PowerPacT J-Frame circuit breaker provides Micrologic Energy with a 6.2E trip unit and an LSIG function with a breaking capacity of 25kA at 600VAC. All PowerPacT J-Frame circuit breakers are equipped with dual-break rotating contacts that reduce the amount of peak current during a short circuit fault. All PowerPacT circuit breakers have an integral push-to-trip button in the cover to manually trip the circuit breaker. PowerPacT J circuit breakers are available in 2 and 3-pole unit mount and I-Line constructions. PowerPacT J I-Line circuit breakers are available in I-Line construction for easy installation and removal in I-Line applications. This unit has I-Line terminations on the line side and mechanical lugs on the load side. This PowerPacT J, 250A, 3 pole, circuit breaker has a breaking capacity of 25kA at 600VAC. This circuit breaker has a continuous current rating of 80% with an ABC phase connection. PowerPacT J circuit breakers comply to UL, CSA, NOM, and IEC standards and are CE marked.
View AllClose