Schneider Electric JLL36200LY Molded Case Circuit Breaker 600V 200A

(No reviews yet) Write a Review
SKU:
JLL36200LY
UPC:
7.85902E+11
Condition:
New
Awg Gauge:
AWG 3/0...350 kcmil aluminium/copper terminals
Width:
104 mm
Environmental Disclosure:
ENVPEP2206031EN
Terminal Identifier:
AL250JD
Continuous Current Rating:
0.8
Long Time Pick-Up Adjustment Range:
0.25...1 x In
Electrical Connection:
lugs, line || lugs, load
Control Type:
toggle
Accessory / Separate Part Type:
low amperage lug
Tightening Torque:
25-25 N.m 95-185 mm² (AWG 3/0...350 kcmil)
Magnetic Tripping Current:
2000-2000 A
[Ue] Rated Operational Voltage:
600 V AC 50/60 Hz IEC 60947-3
Quality Labels:
CE
Ip Degree Of Protection:
front cover IP40
Suitability For Isolation:
yes IEC 60947-2
Net Weight:
2.4 kg
Rohs Exemption Information:
Yes
[Ics] Rated Service Breaking Capacity:
125 kA 220/240 V AC 50/60 Hz IEC 60947-2 || 100 kA 380/440/415 V AC 50/60 Hz IEC 60947-2 || 50 kA 500/525 V AC 50/60 Hz IEC 60947-2 || 20 kA 250 V DC IEC 60947-2 || 20 kA 500 V DC IEC 60947-2
Depth:
86 mm
Circularity Profile:
ENVEOLI2206031EN
Magnetic Hold Current:
1000 A
Poles Description:
3P
Standards:
UL || CSA || NEMA || NOM-003-SCFI-2000 || IEC 60947-2
Mounting Mode:
unit mount lug)
Eu Rohs Directive:
Compliant with Exemptions
Local Signalling:
switched off (OFF) 1 trip indicator green)
Operating Altitude:
< 6561.68 ft (2000 m) without derating || 5000 m with derating
Ambient Air Temperature For Storage:
-50-85 °C
Product Certifications:
UL || CSA || NOM
China Rohs Regulation:
Product out of China RoHS scope. Substance declaration for your information.
California Proposition 65:
WARNING: This product can expose you to chemicals including: DINP, which is known to the State of California to cause cancer, and DIDP, which is known to the State of California to cause birth defects or other reproductive harm. For more information
Circuit Breaker Application:
HACR rated
Protection Type:
overload protection || short-circuit protection
Number Of Slots:
2 auxiliary switch OF plug-in) || 1 alarm switch SD plug-in) || 1 overcurrent trip switch SDE plug-in) || 1 voltage release MN or MX plug-in)
Network Frequency:
50/60 Hz
Product Or Component Type:
circuit breaker
[Ui] Rated Insulation Voltage:
750 V IEC 60947-2
Height:
191 mm
Warranty:
18 months
Ambient Air Temperature For Operation:
-2-70 °C
Wire Stripping Length:
25 mm
Sustainable Offer Status:
Green Premium product
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Pollution Degree:
3
Mercury Free:
Yes
Pvc Free:
Yes
Mounting Support:
lug
Utilisation Category:
category A
[Uimp] Rated Impulse Withstand Voltage:
8 kV IEC 60947-2
Trip Unit Technology:
thermal-magnetic
Breaking Capacity Code:
L
Line Rated Current:
200-200 A
Communication Interface:
Modbus
Breaking Capacity:
125 kA 240 V AC 50/60 Hz UL 489 || 100 kA 480 V AC 50/60 Hz UL 489 || 50 kA 600 V AC 50/60 Hz UL 489 || 20 kA 250 V DC UL 489 || 50 kA 500 V DC UL 489
  • Schneider Electric JLL36200LY Molded Case Circuit Breaker 600V 200A
  • Schneider Electric JLL36200LY Molded Case Circuit Breaker 600V 200A
$7,086.00

Description

PowerPacT J-Frame circuit breakers are designed to protect electrical systems from damage caused by overloads and short circuits. PowerPacT J-Frame circuit breakers are available with either thermal magnetic or MicroLogic electronic trip protection units. This PowerPacT J-Frame circuit breaker provides thermal magnetic circuit protection with a breaking capacity of 50kA at 600VAC. All PowerPacT J-Frame circuit breakers are equipped with dual-break rotating contacts that reduce the amount of peak current during a short circuit fault. All PowerPacT circuit breakers have an integral push-to-trip button in the cover to manually trip the circuit breaker. PowerPacT J circuit breakers are available in 2 and 3-pole unit mount and I-Line constructions. This breaker has lugs on both the line and load sides. This PowerPacT J, 200A, 3 pole, circuit breaker has a breaking capacity of 50kA at 600VAC. This circuit breaker has a continuous current rating of 80%. PowerPacT J circuit breakers comply to UL, CSA, NOM, and IEC standards and are CE marked.
View AllClose