Schneider Electric LC1DT40JD IEC contactor, TeSys Deca, nonreversing, 40A resistive, 4 pole, 4 NO, 12VDC coil, open style
Schneider Electric
$245.70
(No reviews yet)
Write a Review
Write a Review
Schneider Electric
Schneider Electric LC1DT40JD IEC contactor, TeSys Deca, nonreversing, 40A resistive, 4 pole, 4 NO, 12VDC coil, open style
TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 4 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactor has four normally open power contacts. Power contacts have a 40A resistive load rating. Contactor is supplied with a 12 VDC coil with transient suppressor module. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 3.58 inches tall, 1.77 inches wide and 4.21 inches deep. It weighs 0.94 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.
- [Ue] Rated Operational Voltage:
- power circuit <= 690 V AC 25...400 Hz || power circuit <= 300 V DC
- Mercury Free:
- Yes
- Associated Fuse Rating:
- 10 A gG for Signaling circuit conforming to IEC 60947-5-1 || 63 A gG at <= 690 V coordination type 1 for power circuit || 40 A gG at <= 690 V coordination type 2 for power circuit
- Insulation Resistance:
- > 10 MOhm for Signaling circuit
- Flame Retardance:
- V1 conforming to UL 94
- Environmental Disclosure:
- ENVPEP110230EN
- Reach Regulation:
- Reference contains Substances of Very High Concern above the threshold
- Operating Time:
- 20±20 % ms opening || 63±15 % ms closing
- Country of Origin:
- France
- Maximum Operating Rate:
- 3600 cyc/h 60°C
- Control Circuit Type:
- DC standard
- Auxiliary Contacts Type:
- mechanically linked 1 NO + 1 NC IEC 60947-5-1 || mirror contact 1 NC IEC 60947-4-1
- Ip Degree Of Protection:
- IP20 front face IEC 60529
- Range:
- TeSys || TeSys Deca
- Pollution Degree:
- 3
- Sustainable Offer Status:
- Green Premium product
- Pvc Free:
- Yes
- Non-Overlap Time:
- 1.5 ms on de-energisation between NC and NO contact || 1.5 ms on energisation between NC and NO contact
- [Uimp] Rated Impulse Withstand Voltage:
- 6 kV IEC 60947
- Auxiliary Contact Composition:
- 1 NO + 1 NC
- Fire Resistance:
- 850°C IEC 60695-2-1
- Time Constant:
- 28 ms
- Electrical Durability:
- 1.4 Mcycles 40 A AC-1 <= 440 V
- Product Certifications:
- DNV || RINA || BV || CSA || GOST || LROS (Lloyds register of shipping) || GL || UL || CCC
- Poles Description:
- 4P
- Depth:
- 107 mm
- Signaling Circuit Frequency:
- 25...400 Hz
- Mechanical Robustness:
- vibrations contactor open 2 Gn, 5...300 Hz) || vibrations contactor closed 4 Gn, 5...300 Hz) || shocks contactor closed 15 Gn for 11 ms) || shocks contactor open 8 Gn for 11 ms)
- Rated Breaking Capacity:
- 450 A at 440 V for power circuit conforming to IEC 60947
- Product Or Component Type:
- contactor
- [Ie] Rated Operational Current:
- 40 A (at <60°C) at <= 440 V AC AC-1 for power circuit
- Pole Contact Composition:
- 4 NO
- Contactor Application:
- resistive load
- Connections - Terminals:
- control circuit: screw clamp terminals 2 1-2.5 mm² - cable stiffness: flexible with cable end || control circuit: screw clamp terminals 1 1-4 mm² - cable stiffness: flexible without cable end || control circuit: screw clamp terminals 2 1-4 mm² - c
- Circularity Profile:
- ENVEOLI1102030EN
- Protective Treatment:
- THIEC 60068-2-30
- Permissible Ambient Air Temperature Around The Device:
- -40-60°C || 60-70°C with derating
- Mechanical Durability:
- 30 Mcycles
- Tightening Torque:
- control circuit 1.7 N.m screw clamp terminals flat Ø 6 mm || control circuit 1.7 N.m screw clamp terminals Philips No 2 || control circuit 1.7 N.m screw clamp terminals pozidriv No 2 || power circuit 1.8 N.m screw clamps terminals flat Ø 6 mm || po
- Inrush Power In W:
- 5.4-5.4 W 20°C)
- Climatic Withstand:
- IACS E10 exposure to damp heat || IEC 60947-1 Annex Q category D exposure to damp heat
- Safety Reliability Level:
- B10d = 1369863 cycles contactor with nominal load EN/ISO 13849-1 || B10d = 20000000 cycles contactor with mechanical load EN/ISO 13849-1
- Hold-In Power Consumption In W:
- 5.4-5.4 W 20°C
- Irms Rated Making Capacity:
- 140 A AC for Signaling circuit conforming to IEC 60947-5-1 || 250 A DC for Signaling circuit conforming to IEC 60947-5-1 || 450 A at 440 V for power circuit conforming to IEC 60947
- Height:
- 91 mm
- Minimum Switching Voltage:
- 17 V for Signaling circuit
- Device Short Name:
- LC1D
