Schneider Electric

Schneider Electric LC2D80ABNE TeSys Deca reversing contactor 3P 66A AC-3/3e up to 440V coil 24-60V AC/DC

(No reviews yet) Write a Review
SKU:
LC2D80ABNE
MPN:
LC2D80ABNE
Condition:
New
Contactor Application:
motor control || resistive load
Flame Retardance:
V1 conforming to UL 94
Interlocking Type:
mechanical
Pole Contact Composition:
3 NO
Electrical Durability:
1 Mcycles 66 A AC-3 <= 440 V || 0.5 Mcycles 80 A AC-1 <= 440 V || 1 Mcycles 66 A AC-3e
Product Certifications:
CCC || CSA || EAC || UL || KC || DNV-GL || LROS (Lloyds register of shipping) || UKCA
Pollution Degree:
3
Environmental Disclosure:
ENVPEP1607010EN
Standards:
EN/IEC 60947-4-1 || EN/IEC 60947-5-1 || UL 60947-4-1 || CSA C22.2 No 60947-4-1 || IEC 60335-1
Height:
122 mm
Overvoltage Category:
III
Hold-In Power Consumption In Va:
1-1 VA 20°C) 50/60 Hz
Control Circuit Type:
AC 50/60 Hz AC/DC electronic || DC AC/DC electronic
Eu Rohs Directive:
Compliant with Exemptions
Maximum Horse Power Rating:
5 hp at 115 V AC 60 Hz for 1 phase motors || 10 hp at 230/240 V AC 60 Hz for 1 phase motors || 20 hp at 200/208 V AC 60 Hz for 3 phase motors || 20 hp at 230/240 V AC 60 Hz for 3 phase motors || 40 hp at 460/480 V AC 60 Hz for 3 phase motors || 50 hp
Heat Dissipation:
0.7-0.7 W 50/60 Hz
Minimum Switching Voltage:
17 V for Signaling circuit
Product Name:
Tesys Deca green || TeSys Deca
Device Short Name:
LC2D
[Ith] Conventional Free Air Thermal Current:
10 A (at 60°C) for Signaling circuit || 80 A (at 60°C) for power circuit
Circularity Profile:
ENVEOLI1607010EN
Width:
119 mm
Sustainable Offer Status:
Green Premium product
Rated Breaking Capacity:
1000 A at 440 V for power circuit conforming to IEC 60947
Control Circuit Voltage Limits:
<= 0.1 Uc -40-70°C drop-out AC/DC || 0.85...1.1 Uc -40-60°C operational AC || 0.8...1.1 Uc -40-60°C operational DC || 1...1.1 Uc 60-70°C operational AC/DC
Auxiliary Contact Composition:
1 NO + 1 NC
Operating Altitude:
0...9842.52 ft (0...3000 m)
Connections - Terminals:
control circuit screw clamp terminals 1 1-4 mm²flexible with cable end || control circuit screw clamp terminals 2 1-2.5 mm²flexible with cable end || power circuit EverLink BTR screw connectors 1 1-35 mm²flexible with cable end || power circuit Ev
[Ie] Rated Operational Current:
80 A (at <60°C) at <= 440 V AC-1 for power circuit || 66 A (at <60°C) at <= 440 V AC-3 for power circuit || 66 A (at <60°C) AC-3e for power circuit
Maximum Operating Rate:
3600 cyc/h 60°C
Depth:
120 mm
Warranty:
18 months
Mounting Support:
rail || plate
Color:
Gray SE GREY 6) || Green SE GREEN 2)
Power Dissipation Per Pole:
9.6 W AC-1 || 6.5 W AC-3 || 6.5 W AC-3e
[Uimp] Rated Impulse Withstand Voltage:
6 kV IEC 60947
Hold-In Power Consumption In W:
0.7-0.7 W 20°C
Coil Technology:
built-in bidirectional peak limiting
Mechanical Robustness:
vibrations contactor open2 Gn, 5...300 Hz || vibrations contactor closed4 Gn, 5...300 Hz || shocks contactor open10 Gn for 11 ms || shocks contactor closed15 Gn for 11 ms
Ambient Air Temperature For Operation:
-40-60°C || 60-70°C with derating
Weight:
2.174 kg
Tightening Torque:
control circuit 1.7 N.m screw clamp terminals flat Ø 6 mm || control circuit 1.7 N.m screw clamp terminals Philips No 2 || power circuit 8 N.m EverLink BTR screw connectors 25-35 mm² hexagonal 4 mm || power circuit 5 N.m EverLink BTR screw connecto
Insulation Resistance:
> 10 MOhm for Signaling circuit
Irms Rated Making Capacity:
140 A AC for Signaling circuit conforming to IEC 60947-5-1 || 250 A DC for Signaling circuit conforming to IEC 60947-5-1 || 1000 A at 440 V for power circuit conforming to IEC 60947
[Ui] Rated Insulation Voltage:
power circuit 690 V IEC 60947-4-1 || Signaling circuit 690 V IEC 60947-1
Rohs Exemption Information:
Yes
Halogen Content Performance:
Halogen free plastic parts & cables product
Average Impedance:
1.5 mOhm - Ith 80 A 50 Hz for power circuit
Operating Time:
55...65 ms closing || 20...80 ms opening
Utilisation Category:
AC-1 || AC-3 || AC-3e
$1,005.00

Description

TeSys D reversing contactor, 3 poles (3NO), for motor control applications up to 9A/690V AC-3 (4kW@400V). It provides low consumption 100-250V AC/DC coils with electronic control, 2NO+2NC built-in auxiliary contacts (NC mirror contacts), connection by screw clamp terminals. For operating rates until 3600 cycles/hour and environments until 60°C, it procures high reliability and durability. Compact (90mm width), DIN-rail mounting or screw fixing. With pre-wired reversing power connections, mechanical interlock (without electrical interlocking). Multi standards certified (IEC, UL, CSA, CCC, EAC, Marine), Green Premium compliant (RoHS/REACh).
View AllClose

Related Products

Related Products