Schneider Electric LGL36400U33X Molded Case Circuit Breaker 600V 400A

(No reviews yet) Write a Review
SKU:
LGL36400U33X
UPC:
785901637622
Condition:
New
Standards:
UL || CSA || NEMA || NOM-003-SCFI-2000 || IEC 60947-2
Product Or Component Type:
circuit breaker
Range:
PowerPact
Height:
340 mm
[Ics] Rated Service Breaking Capacity:
65 kA 220/240 V AC 50/60 Hz IEC 60947-2 || 35 kA 380/440/415 V AC 50/60 Hz IEC 60947-2 || 18 kA 500/525 V AC 50/60 Hz IEC 60947-2 || 20 kA 250 V DC IEC 60947-2 || 20 kA 500 V DC IEC 60947-2
Mercury Free:
Yes
Number Of Slots:
2 auxiliary switch OF plug-in) || 1 alarm switch SD plug-in) || 1 overcurrent trip switch SDE plug-in) || 1 voltage release MN or MX plug-in)
Line Rated Current:
400-400 A
Device Application:
distribution
Net Weight:
6.2 kg
Trip Unit Name:
MicroLogic 3.3 S
Breaking Capacity:
65 kA 240 V AC 50/60 Hz UL 489 || 35 kA 480 V AC 50/60 Hz UL 489 || 18 kA 600 V AC 50/60 Hz UL 489 || 20 kA 250 V DC UL 489 || 20 kA 500 V DC UL 489
China Rohs Regulation:
Product out of China RoHS scope. Substance declaration for your information.
Wire Stripping Length:
31 mm || 61 mm
Ambient Air Temperature For Operation:
-2-70 °C
Pvc Free:
Yes
Width:
140 mm
[Ui] Rated Insulation Voltage:
750 V IEC 60947-2
Mounting Support:
lug
Awg Gauge:
2 x AWG 2/0...500 kcmil aluminium/copper
Communication Interface:
Modbus || Ethernet
Color:
Black
Circuit Breaker Application:
HACR rated
Terminal Identifier:
AL600LS52K3
[Ue] Rated Operational Voltage:
600 V AC 50/60 Hz IEC 60947-3
Operating Altitude:
< 6561.68 ft (2000 m) without derating || 5000 m with derating
Ambient Air Temperature For Storage:
-50-85 °C
Device Short Name:
L-Frame
Network Frequency:
50/60 Hz
Breaking Capacity Code:
G
Suitability For Isolation:
yes IEC 60947-2
Pollution Degree:
3 IEC 60947-1
Trip Unit Technology:
electronic, standard, MicroLogic 3.3 S, LSI
Sustainable Offer Status:
Green Premium product
Environmental Disclosure:
ENVPEP2206029EN
Control Type:
toggle
Electrical Connection:
lugs, line || lugs, load
Long Time Pick-Up Adjustment Range:
0.25...1 x In
Local Signalling:
ready 1 LED green) || alarm 1 LED 90 % Ir orange) || alarm LED 105 % Ir red) || switched off (OFF) 1 trip indicator green)
Depth:
110 mm
Mounting Mode:
unit mount lug)
Poles Description:
3P
Rohs Exemption Information:
Yes
Eu Rohs Directive:
Compliant with Exemptions
California Proposition 65:
WARNING: This product can expose you to chemicals including: DINP, which is known to the State of California to cause cancer, and DIDP, which is known to the State of California to cause birth defects or other reproductive harm. For more information
[Uimp] Rated Impulse Withstand Voltage:
8 kV IEC 60947-2
Product Certifications:
UL || CSA || NOM
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Product Name:
PowerPact L
Ip Degree Of Protection:
front cover IP40
Warranty:
18 months
Circularity Profile:
ENVEOLI2206029EN
Continuous Current Rating:
0.8
Protection Technology:
current limiter
Tightening Torque:
50-50 N.m 70-240 mm² (AWG 2/0...500 kcmil)
Utilisation Category:
category A
$5,674.00

Description

PowerPacT L-Frame circuit breakers are designed to protect electrical systems from damage caused by overloads and short circuits. PowerPacT L-Frame circuit breakers are available with electronic trip units. All PowerPacT L-Frame circuit breakers are equipped with dual-break rotating contacts that reduce the amount of peak current during a short circuit fault. All PowerPacT circuit breakers have an integral push-to-trip button in the cover to manually trip the circuit breaker. PowerPacT L circuit breakers are available in 3 and 4-pole unit mount, I-Line, and drawout constructions. This PowerPacT L, 400A, 3 pole, circuit breaker has an interrupting rating of 18kA at 600VAC. This circuit breaker provides MicroLogic Standard with a 3.3S trip unit and an LSI function. This unit has lugs on both the line and load sides. This circuit breaker has a continuous current rating of 80%. This circuit breaker has a continuous current rating of 80%. PowerPacT L circuit breakers comply to UL, CSA, NOM, and IEC standards and are CE marked. PowerPacT L circuit breakers comply to UL, CSA, NOM, and IEC standards and are CE marked.
View AllClose