Schneider Electric LGL36600U31X Molded Case Circuit Breaker 600V 600A

(No reviews yet) Write a Review
SKU:
LGL36600U31X
UPC:
785901594437
Condition:
New
Continuous Current Rating:
0.8
Device Application:
distribution
Standards:
UL || CSA || NEMA || NOM-003-SCFI-2000 || IEC 60947-2
Warranty:
18 months
Sustainable Offer Status:
Green Premium product
Circularity Profile:
ENVEOLI2206029EN
Suitability For Isolation:
yes IEC 60947-2
Ambient Air Temperature For Storage:
-50-85 °C
Range:
PowerPact
[Ics] Rated Service Breaking Capacity:
65 kA 220/240 V AC 50/60 Hz IEC 60947-2 || 35 kA 380/440/415 V AC 50/60 Hz IEC 60947-2 || 18 kA 500/525 V AC 50/60 Hz IEC 60947-2 || 20 kA 250 V DC IEC 60947-2 || 20 kA 500 V DC IEC 60947-2
California Proposition 65:
WARNING: This product can expose you to chemicals including: DINP, which is known to the State of California to cause cancer, and DIDP, which is known to the State of California to cause birth defects or other reproductive harm. For more information
Circuit Breaker Application:
HACR rated
Control Type:
toggle
Product Certifications:
UL || CSA || NOM
Line Rated Current:
600-600 A
Awg Gauge:
2 x AWG 2/0...500 kcmil aluminium/copper
Trip Unit Technology:
electronic, standard, MicroLogic 3.3, LI
Environmental Disclosure:
ENVPEP2206029EN
[Ui] Rated Insulation Voltage:
750 V IEC 60947-2
Operating Altitude:
< 6561.68 ft (2000 m) without derating || 5000 m with derating
Device Short Name:
L-Frame
Pollution Degree:
3 IEC 60947-1
Pvc Free:
Yes
Mounting Mode:
unit mount lug)
Terminal Identifier:
AL600LS52K3
[Uimp] Rated Impulse Withstand Voltage:
8 kV IEC 60947-2
Electrical Connection:
lugs, line || lugs, load
Local Signalling:
ready 1 LED green) || alarm 1 LED 90 % Ir orange) || alarm LED 105 % Ir red) || switched off (OFF) 1 trip indicator green)
Depth:
110 mm
Net Weight:
6.2 kg
Number Of Slots:
2 auxiliary switch OF plug-in) || 1 alarm switch SD plug-in) || 1 overcurrent trip switch SDE plug-in) || 1 voltage release MN or MX plug-in)
[Ue] Rated Operational Voltage:
600 V AC 50/60 Hz IEC 60947-3
Trip Unit Name:
MicroLogic 3.3
Product Or Component Type:
circuit breaker
Tightening Torque:
50-50 N.m 70-240 mm² (AWG 2/0...500 kcmil)
Protection Technology:
current limiter
Mounting Support:
lug
Ip Degree Of Protection:
front cover IP40
China Rohs Regulation:
Product out of China RoHS scope. Substance declaration for your information.
Long Time Pick-Up Adjustment Range:
0.25...1 x In
Utilisation Category:
category A
Product Name:
PowerPact L
Wire Stripping Length:
31 mm || 61 mm
Communication Interface:
Modbus || Ethernet
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Breaking Capacity:
65 kA 240 V AC 50/60 Hz UL 489 || 35 kA 480 V AC 50/60 Hz UL 489 || 18 kA 600 V AC 50/60 Hz UL 489 || 20 kA 250 V DC UL 489 || 20 kA 500 V DC UL 489
Breaking Capacity Code:
G
Mercury Free:
Yes
Color:
Black
Height:
340 mm
Ambient Air Temperature For Operation:
-2-70 °C
Rohs Exemption Information:
Yes
Eu Rohs Directive:
Compliant with Exemptions
Width:
140 mm
Poles Description:
3P
Network Frequency:
50/60 Hz
  • Schneider Electric LGL36600U31X Molded Case Circuit Breaker 600V 600A
  • Schneider Electric LGL36600U31X Molded Case Circuit Breaker 600V 600A
  • Schneider Electric LGL36600U31X Molded Case Circuit Breaker 600V 600A
$7,484.00

Description

PowerPacT L-Frame circuit breakers are designed to protect electrical systems from damage caused by overloads and short circuits. PowerPacT L-Frame circuit breakers are available with electronic trip units. All PowerPacT L-Frame circuit breakers are equipped with dual-break rotating contacts that reduce the amount of peak current during a short circuit fault. All PowerPacT circuit breakers have an integral push-to-trip button in the cover to manually trip the circuit breaker. PowerPacT L circuit breakers are available in 3 and 4-pole unit mount, I-Line, and drawout constructions. This PowerPacT L, 600A, 3 pole, circuit breaker has an interrupting rating of 18kA at 600VAC. This circuit breaker provides MicroLogic Standard with a 3.3 trip unit and an LI function. This unit has lugs on both the line and load sides. This circuit breaker has a continuous current rating of 80%. This circuit breaker has a continuous current rating of 80%. PowerPacT L circuit breakers comply to UL, CSA, NOM, and IEC standards and are CE marked. PowerPacT L circuit breakers comply to UL, CSA, NOM, and IEC standards and are CE marked.
View AllClose