Schneider Electric LJA36400CU31X Molded Case Circuit Breaker 600V 400A

(No reviews yet) Write a Review
SKU:
LJA36400CU31X
UPC:
785901395430
Condition:
New
Pvc Free:
Yes
Net Weight:
6.2 kg
Poles Description:
3P
[Ics] Rated Service Breaking Capacity:
65 kA 220/240 V AC 50/60 Hz IEC 60947-2 || 35 kA 380/440/415 V AC 50/60 Hz IEC 60947-2 || 18 kA 500/525 V AC 50/60 Hz IEC 60947-2 || 20 kA 250 V DC IEC 60947-2 || 20 kA 500 V DC IEC 60947-2
Product Or Component Type:
circuit breaker
Network Frequency:
50/60 Hz
Sustainable Offer Status:
Green Premium product
Standards:
UL || CSA || NEMA || NOM-003-SCFI-2000 || IEC 60947-2
Circuit Breaker Application:
HACR rated
Breaking Capacity Code:
J
[Uimp] Rated Impulse Withstand Voltage:
8 kV IEC 60947-2
[Ui] Rated Insulation Voltage:
750 V IEC 60947-2
Pollution Degree:
3 IEC 60947-1
Eu Rohs Directive:
Compliant with Exemptions
Product Name:
PowerPact L
Mercury Free:
Yes
Breaking Capacity:
100 kA 240 V AC 50/60 Hz UL 489 || 65 kA 480 V AC 50/60 Hz UL 489 || 25 kA 600 V AC 50/60 Hz UL 489 || 20 kA 250 V DC UL 489
Terminal Identifier:
AL600LS52K3
Continuous Current Rating:
1
Local Signalling:
ready 1 LED green) || alarm 1 LED 90 % Ir orange) || alarm LED 105 % Ir red) || switched off (OFF) 1 trip indicator green)
Utilisation Category:
category A
Ip Degree Of Protection:
front cover IP40
Suitability For Isolation:
yes IEC 60947-2
Number Of Slots:
2 auxiliary switch OF plug-in) || 1 alarm switch SD plug-in) || 1 overcurrent trip switch SDE plug-in) || 1 voltage release MN or MX plug-in)
Product Certifications:
UL || CSA || NOM
Environmental Disclosure:
ENVPEP2206029EN
[Ue] Rated Operational Voltage:
600 V AC 50/60 Hz IEC 60947-3
Electrical Connection:
I-Line connection, line || lugs, load
Width:
140 mm
Mounting Support:
bracket
Device Short Name:
L-Frame
Warranty:
18 months
Operating Altitude:
< 6561.68 ft (2000 m) without derating || 5000 m with derating
Depth:
110 mm
Ambient Air Temperature For Operation:
-2-70 °C
Circularity Profile:
ENVEOLI2206029EN
China Rohs Regulation:
Product out of China RoHS scope. Substance declaration for your information.
Device Application:
distribution
Long Time Pick-Up Adjustment Range:
0.25...1 x In
Communication Interface:
Modbus || Ethernet
Trip Unit Name:
MicroLogic 3.3
Line Rated Current:
400-400 A
Ambient Air Temperature For Storage:
-50-85 °C
Color:
Black
Awg Gauge:
2 x AWG 2/0...500 kcmil aluminium/copper
Rohs Exemption Information:
Yes
Tightening Torque:
50-50 N.m 70-240 mm² (AWG 2/0...500 kcmil)
Mounting Mode:
I-Line bracket)
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Control Type:
toggle
Wire Stripping Length:
31 mm || 61 mm
Trip Unit Technology:
electronic, standard, MicroLogic 3.3, LI
Range:
PowerPact
Mounting Height:
6 in
Phase Connection:
ABC
Height:
340 mm
California Proposition 65:
WARNING: This product can expose you to chemicals including: DINP, which is known to the State of California to cause cancer, and DIDP, which is known to the State of California to cause birth defects or other reproductive harm. For more information
  • Schneider Electric LJA36400CU31X Molded Case Circuit Breaker 600V 400A
  • Schneider Electric LJA36400CU31X Molded Case Circuit Breaker 600V 400A
  • Schneider Electric LJA36400CU31X Molded Case Circuit Breaker 600V 400A
$10,214.00

Description

PowerPacT L-Frame circuit breakers are designed to protect electrical systems from damage caused by overloads and short circuits. PowerPacT L-Frame circuit breakers are available with electronic trip units. All PowerPacT L-Frame circuit breakers are equipped with dual-break rotating contacts that reduce the amount of peak current during a short circuit fault. All PowerPacT circuit breakers have an integral push-to-trip button in the cover to manually trip the circuit breaker. PowerPacT L circuit breakers are available in 3 and 4-pole unit mount, I-Line, and drawout constructions. This PowerPacT L, 400A, 3 pole, circuit breaker has an interrupting rating of 25kA at 600VAC. This circuit breaker provides MicroLogic Standard with a 3.3 trip unit and an LI function. This unit has I-Line terminations on the line side and mechanical lugs on the load side. This circuit breaker has a continuous current rating of 100% with an ABC phase connection. This circuit breaker has a continuous current rating of 100% with an ABC phase connection. PowerPacT L circuit breakers comply to UL, CSA, NOM, and IEC standards and are CE marked. PowerPacT L circuit breakers comply to UL, CSA, NOM, and IEC standards and are CE marked.
View AllClose