Schneider Electric

Schneider Electric LULC08 Tesys U Canopen Comms Module

(No reviews yet) Write a Review
SKU:
LULC08
UPC:
3.38912E+12
Condition:
New
[Us] Rated Supply Voltage:
24 V DC
Response Time:
10 ms +/- 30 % change to state 0 || 10 ms +/- 30 % change to state 1
Logic Input:
positive 24 V DC - 7 mA
Number Of Outputs:
2 dedicated to starter-controller coil operation || 1
Addressing:
1...127
China Rohs Regulation:
Product out of China RoHS scope. Substance declaration for your information.
Rohs Exemption Information:
Yes
Eu Rohs Directive:
Compliant with Exemptions
Warranty:
18 months
Output Current:
<= 500 mA
Product Compatibility:
LUCA || LUCL || LUCD || LUCC || LUCM || LUCB
Physical Interface:
9-way SUB-D female
Range Compatibility:
TeSys TeSys U LUB non reversing power base || TeSys TeSys U LU2B reversing power base
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Tightening Torque:
0.2-0.25 N.m 2.5 mm
Current Consumption:
1.5 mA 24 V DC 20...28 V
Product Or Component Type:
communication module
Ip Degree Of Protection:
IP20 conforming to IEC 60529
Function Available:
communication module
Mounting Location:
front side
Switching Current Capacity:
0.5 mA 24 V
Ambient Air Temperature For Operation:
-25-55 °C
Device Application:
communication
Communication Port Protocol:
CAN2.0A || CAN2.B
Mercury Free:
Yes
Input Type:
resistive
Range:
TeSys
Bus Type:
CANopen
Device Short Name:
LUL
Connection Pitch:
3.81 mm
Local Signalling:
3 LEDs front panel
Associated Cable Type:
AWG 26...AWG 16
Standards:
DR 303-2 || CIADS-301 V4.02
Connections - Terminals:
screw clamp terminals 1 0.14-1 mm²flexible without cable end || screw clamp terminals 1 0.14-1 mm²rigid without cable end || screw clamp terminals 1 0.25-0.5 mm²flexible with cable end || screw clamp terminals 1 0.25-1 mm²flexible with cable end
Protection Type:
gL fuse 2 A
Mounting Mode:
plug-in
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Catalog:
View
Datasheet:
View
$218.00

Description

TeSys U communication module for CANopen, to be inserted in advanced power bases LUB120, LUB320, LUB380 equipped with a BL type (24V DC) LUC control unit. It provides a 9-point SUB-D male connector for connection to a CANopen network, a plug-in terminal block for the connection to an external power supply 24V DC, in addition with 2 x configurable logic inputs 24V DC and 1 x logic output 24V DC. On the bottom, a 3-point plug-in terminal block is provided for the local control of the starter controller, to be associated with a control terminal block LU9BN11L for a LUB base or LU9MRL for a LU2B base. It displays 3 LEDs giving the status of the module (24V) and communication line (STATUS, ERR). Certified when used in conjunction with a LUB power base (IEC, UL, CSA, CCC, EAC, Marine), Green Premium compliant (RoHS/REACh).
View AllClose