null
Schneider Electric LXM28AU20M3X Lexium28 Can Io Drive 3Ph 230V 2,0Kw

Schneider Electric LXM28AU20M3X Lexium28 Can Io Drive 3Ph 230V 2,0Kw

Schneider Electric
SKU:
LXM28AU20M3X
|
UPC:
3606480711824
Availability:
Contact us to confirm availability and lead times.
$1,292.01
Condition:
New
$1200 Minimum Order for Non-stock Items or $60 Addl Schneider Handling Fee Applies
Current Stock:
Description
This product is part of the Lexium 28 range, an offer of servo drives from 0.05kW to 4.5kW. The motion servo drive features EMC filter, integrated CANopen, CAN motion interface 7-segment display with 5 buttons. It is a motion servo drive with a rated supply voltage of 220V (three phase), an output current of 12A, nominal power of 2kW and continuous power of 2000W. It is furnished with spring terminal for electrical connection and RJ45 connectors (CN4) for CANopen/CAN motion. There is an electrical isolation between power/control. It offers CANopen and CAN motion communication interfaces and physical interface of RS485 for Modbus Serial line slave. It is an IP20 rated product. Its dimensions are 62mm (width) x 184mm (depth) x 170mm (height). It weighs 1.7kg. It is suitable for machine control solutions. This product is certified by CE, CSA and CULus. It meets EN/IEC 61800-5-1 standards. This product is compatible with servo motor BCH2 (130mm, 4 motor stacks) at 2000W and servo motor BCH2 (100mm, 2 motor stacks) at 2000W. The Lexium 28 range offers predeterminate combinations to suit the requirements of motion control applications and optimize the performance of the installation. Lexium 28 servo drives and Lexium BCH2 servo motors, optimized servo bundles for compact machines.
Additional Information
Emc Filter:
without EMC filter
Ambient Air Temperature For Operation:
0-55 °C
Discrete Output Number:
5 logic output CN1)12...24 V DC || 1 pulse train output (PTO) CN1)
Shock Resistance:
10 gn, type I IEC 60721-3-3
Absolute Accuracy Error:
0.001
Height:
170 mm
Safety Function:
STO (safe torque off), Integrated
Number Of Addresses:
1-127 CANopen, CANmotion
Communication Interface:
CANopen, Integrated || CANmotion, Integrated
Environmental Disclosure:
ENVPEP1409001EN
Operating Altitude:
<= 3280.84 ft (1000 m) without derating || > 3280.84...6561.68 ft (> 1000...2000 m) 1 % per 100 m
Discrete Input Voltage:
24 V DC logic
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Discrete Input Logic:
positive or negative CN1)
Maximum Leakage Current:
1.35 mA
Sustainable Offer Status:
Green Premium product
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Format Of The Drive:
compact housing
Output Voltage:
<= power supply voltage
Line Current:
8.7 A 137.1 % 220 V, three phase
Discrete Output Voltage:
12...24 V DC
Output Current 3S Peak 3:
36 A 220 V
Reach Free Of Svhc:
Yes
Continuous Power:
2000 W 220 V
Range Of Product:
Lexium 28
Analogue Input Type:
V_REF voltage analog input - 10...10 V 10 kOhm 14 bits || T_REF voltage analog input
[Us] Rated Supply Voltage:
200...240 V - 10...15 %)three phase
Reach Regulation:
Free of Substances of Very High Concern above the threshold
Switching Frequency:
8 kHz
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Device Short Name:
LXM28A
Type Of Cable:
shielded motor cable 0-55 °C) copper
Safety Level:
SIL 2 IEC 61800-5-2 2007 || SIL 2 IEC 61508-1 2010 || PL d/category 3 ISO 13849-1 2008 || SIL 2 ISO 13849-1 2009/AC || SIL 2 IEC 60204-1 2006 || SIL 2 IEC 60204-1 2009/A1 || SIL 2 IEC 60204-1 2010/AC || SIL 2 IEC 62061 2012
Protection Type:
against reverse polarity inputs signal || against short-circuits outputs signal || overcurrent motor || overvoltage motor || undervoltage motor || overheating motor || overload motor || overspeed motor
Method Of Access:
slave
Discrete Input Number:
8 programmable CN1) || 1 pulse train input (PTI) CN1) || 2 fast capture CN1) || 1 safety function STO CN9)
Supply Voltage Limits:
200-255 V three phase
Status Led:
1 LED (Red) charge || 1 LED (Green) RUN || 1 LED (Red) error
Ip Degree Of Protection:
IP20
Operating Position:
vertical
Pvc Free:
Yes
Electromagnetic Compatibility:
conducted emission - test level: level 3 category C3 conforming to IEC 61800-3
Phase:
three phase
Product Compatibility:
servo motor BCH2 130 mm, 4 2000 W || servo motor BCH2 100 mm, 2 2000 W || servo motor BCH2 180 mm, 1 2000 W
Mercury Free:
Yes
Relative Humidity:
5-95 % without condensation
Width:
62 mm
Overvoltage Category:
III
Electrical Isolation:
between power and control
Network Frequency:
47.5...63 Hz
Vibration Resistance:
3M4 3 mm 9-200 Hz)IEC 60721-3-3
Continuous Output Current:
12 A 8 kHz
Depth:
184 mm
Marking:
CE || CSA || cULus
Ambient Air Temperature For Storage:
-25-65 °C
Output Current 3S Peak:
36 A 220 V
Electrical Connection:
spring terminal 3.3...4 mm², AWG 12 L1-L2) || spring terminal 3.3...4 mm², AWG 12 R, S, T) || spring terminal 3.3...4 mm², AWG 12 U, V, W, PE) || spring terminal 3.3...4 mm², AWG 12 PA/+, PBe)
Standards:
IEC 61800-5-1
Rohs Exemption Information:
Yes
Circularity Profile:
ENVEOLI1409001EN
Control Signal Type:
servo motor encoder feedback CN2
Discrete Output Logic:
positive or negative CN1)
Analogue Input Number:
2
Net Weight:
1.7 kg
Supply Frequency:
50/60 Hz - 5...5 %
Nominal Power:
2 kW 220 V 8 kHz
Physical Interface:
RS485 Modbus Serial line slave
Product Or Component Type:
motion servo drive
China Rohs Regulation:
X
Connector Type:
RJ45 CN4)CANopen, CANmotion
Signalling Function:
servo status and fault codes five 7-segment display units
Output Current 3S Peak 2:
36 A 220 V
Type Of Cooling:
integrated fan
Transmission Rate:
250 kbit/s 100-250 m CANopen, CANmotion || 500 kbit/s 4-100 m CANopen, CANmotion || 1 Mbit/s 4-4 m CANopen, CANmotion
Product Certifications:
cULus || CSA || CE
Catalog:
View
Datasheet:
View
QN-QUOTE-REQUEST:
true