Schneider Electric

Schneider Electric LXM28SU02M3X motion servo drive, Lexium 28, sercos, single and three phase, 200 to 240V, 200W

(No reviews yet) Write a Review
SKU:
LXM28SU02M3X
MPN:
LXM28SU02M3X
Condition:
New
Output Voltage:
<= power supply voltage
Width:
55 mm
Sustainable Offer Status:
Green Premium product
Continuous Output Current:
1.5 A 16 kHz
Vibration Resistance:
3M4 3 mm 9-200 Hz)IEC 60721-3-3
Connector Type:
RJ45 CN3) || RJ45 CN4)
Discrete Output Voltage:
12...24 V DC
Height:
150 mm
Circularity Profile:
ENVEOLI1409001EN
Product Or Component Type:
motion servo drive
Output Current 3S Peak:
4.5 A 220 V
Mercury Free:
Yes
Type Of Cable:
shielded motor cable 0-55°C) copper
Standards:
IEC 61800-5-1
Line Current:
2.4 A 226.8 % 220 V, single phase || 2.4 A 200.7 % 220 V, three phase
Nominal Power:
0.2 kW 220 V 16 kHz
Range Of Product:
Lexium 28
Supply Voltage Limits:
200-255 V three phase || 170-255 V single phase
Country of Origin:
China
Relative Humidity:
5-95 % without condensation
Marking:
CSA || cULus || CE
Reach Regulation:
Free of Substances of Very High Concern above the threshold
Discrete Input Logic:
positive or negative CN1)
Overvoltage Category:
III
Electrical Isolation:
between power and control
Safety Level:
SIL 2 IEC 61800-5-2 2007 || SIL 2 IEC 61508-1 2010 || PL d/category 3 ISO 13849-1 2008 || SIL 2 ISO 13849-1 2009/AC || SIL 2 IEC 60204-1 2006 || SIL 2 IEC 60204-1 2009/A1 || SIL 2 IEC 60204-1 2010/AC || SIL 2 IEC 62061 2012
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Status Led:
1 LED (Red) charge || 1 LED (Green) RUN || 1 LED (Red) error
Pvc Free:
Yes
Ambient Air Temperature For Operation:
0-55°C
Depth:
146 mm
Maximum Leakage Current:
1.3 mA
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Safety Function:
STO (safe torque off), Integrated
Communication Interface:
Modbus, Integrated || SERCOS III, Integrated
Output Current 3S Peak 3:
4.5 A 220 V
Emc Filter:
without EMC filter
Ip Degree Of Protection:
IP20
Phase:
three phase || single phase
Discrete Output Number:
4 logic output CN1)12...24 V DC || 1 pulse train output (PTO) CN1)
Rohs Exemption Information:
Yes
Discrete Input Number:
8 programmable CN1) || 2 fast capture CN1) || 1 safety function STO CN9)
Environmental Disclosure:
ENVPEP1409001EN
Operating Position:
vertical
Switching Frequency:
16 kHz
Method Of Access:
slave
Format Of The Drive:
compact housing
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Discrete Output Logic:
positive or negative CN1)
Output Current 3S Peak 2:
4.5 A 220 V
$835.00

Description

This product is part of the Lexium 28 range, an offer of motion servo drives for machines from 0.05 to 4.5kW. The motion servo drive without EMC filter, features an HMI interface 7-segment display with 5 buttons. Thanks to its open communication concept, Lexium 28 servo drive can be easily integrated into numerous different control system architectures. The motion servo drives embed one pulse-train-input PTI and one pulse train-output PTO interfaces. It is a motion servo drive with a rated supply voltage of 220V (single phase and three phase), an output current of 1.5A at 220V, a power of 200W/0.26HP and a continuous power of 200W at 220V. It is furnished with spring terminal for electrical connection and RJ45 connectors for Sercos integrated communication interface. It is an IP20 rated product. Its dimensions are 55mm (Width) x 146mm (Depth) x 150mm (Height). It weighs 1kg. This product is certified by CE, CSA and CULus. It meets EN/IEC 61800-5-1 standards. This product is compatible with motor BCH2 (60mm, 1 motor stacks) at 200W. Mount this servo drive in a vertical position (more or less 10°). This is required for cooling the device. Lexium 28 and Lexium BCH2, the optimized servo bundle for all motion control solutions are cost effective, energy efficient and embedded safety. Lexium 28 servo drives and Lexium BCH2 motors, optimized servo bundles for compact machines.
View AllClose