Schneider Electric LXM32AD18N4 Lxm32A Can Rj45 18A Rms Peak 3Ph 480V

(No reviews yet) Write a Review
SKU:
LXM32AD18N4
UPC:
3606480076794
Condition:
New
Mercury Free:
Yes
Width:
48 mm
Pvc Free:
Yes
Standards:
EN/IEC 61800-3 || EN/IEC 61800-5-1
Operating Altitude:
<= 3280.84 ft (1000 m) without derating || > 3280.84...9842.52 ft (> 1000...3000 m) with conditions
Response Time On Output:
250 µs DO)discrete
Operating Position:
vertical +/- 10 degree
Discrete Input Type:
capture CAP || logic DI || safety compliment of STO_A, compliment of STO_B
Transmission Rate:
1 Mbps 4-4 m CANopen, CANmotion || 125 kbps 500-500 m CANopen, CANmotion || 250 kbps 250-250 m CANopen, CANmotion || 50 kbps 1000-1000 m CANopen, CANmotion || 500 kbps 100-100 m CANopen, CANmotion || 9600, 19200, 38400 bps 40-40 m Modbus
Rohs Exemption Information:
Yes
Maximum Leakage Current:
30 mA
Relative Humidity:
Class 3K3 (5 to 85 %) without condensation IEC 60721-3-3
Line Current:
6 A 78 % 208 V, with external line choke 1 mH || 6.9 A 90 % 400 V, with external line choke 1 mH || 6 A 98 % 480 V, with external line choke 1 mH || 6.2 A 140 % 208 V, without line choke || 5.2 A 161 % 400 V, without line choke || 4.5 A 165 % 480 V,
Environmental Characteristic:
classes 3C1 IEC 60721-3-3
Output Current 3S Peak:
18 A 208 V 5 s || 18 A 480 V 5 s
Circularity Profile:
ENVEOLI110605EN
Height:
270 mm
Discrete Input Logic:
positive compliment of STO_A, compliment of STO_B)< 5 V > 15 V EN/IEC 61131-2 type 1 || positive DI)> 19 V < 9 V EN/IEC 61131-2 type 1 || positive or negative DI)< 5 V > 15 V EN/IEC 61131-2 type 1
Product Certifications:
TÜV || UL || CSA
Phase:
three phase
Discrete Input Number:
1 capture || 2 safety || 4 logic
Response Time:
<= 5 ms compliment of STO_A, compliment of STO_B
Number Of Addresses:
1-127 CANopen, CANmotion || 1-247 Modbus
Discrete Input Voltage:
24 V DC capture || 24 V DC logic || 24 V DC safety
Braking Current:
50 mA
Output Voltage:
<= power supply voltage
Pollution Degree:
2 EN/IEC 61800-5-1
Sampling Duration:
DI 0.25 ms discrete
Method Of Access:
slave
Discrete Output Number:
2
Vibration Resistance:
1 gn 13-150 Hz)EN/IEC 60068-2-6 || 1.5 mm peak to peak 3-13 Hz)EN/IEC 60068-2-6
Safety Function:
STO (safe torque off), Integrated
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Contact Bounce Time:
<= 1 ms compliment of STO_A, compliment of STO_B || 2 µs CAP || 0.25 µs...1.5 ms DI
Tightening Torque:
CN8 0.5-0.5 N.m || CN1 0.7-0.7 N.m || CN10 0.7-0.7 N.m
Discrete Output Logic:
positive or negative DO)EN/IEC 61131-2
Connector Type:
RJ45 (labelled CN4 or CN5) CANmotion || RJ45 (labelled CN4 or CN5) CANopen || RJ45 (labelled CN7) Modbus
Signalling Function:
display of faults 7 segments
China Rohs Regulation:
X
Net Weight:
2 kg
Physical Interface:
2-wire RS485 multidrop Modbus
Supply Voltage Limits:
170-264 V || 323-528 V
Ambient Air Temperature For Operation:
0-50 °C UL
Control Signal Type:
servo motor encoder feedback
Range Of Product:
Lexium 32
Electrical Isolation:
between power and control
Protection Type:
against reverse polarity inputs signal || against short-circuits outputs signal
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Communication Service:
1 receive SDO CANmotion || 1 transmit SDO CANmotion || 2 PDOs conforming to DSP 402 CANmotion || 2 SDOs receive CANopen || 2 SDOs send CANopen || 4 configurable mapping PDOs CANopen || CANopen device profile drives and motion control CANopen, CANmoti
Continuous Power:
1700 W 208 V || 3300 W 400 V || 3300 W 480 V
Continuous Output Current:
6 A 8 kHz
Type Of Cooling:
integrated fan
Marking:
CE
Ambient Air Temperature For Storage:
-25-70 °C
Nominal Power:
1.2 kW 208 V 8 kHz || 1.8 kW 400 V 8 kHz || 1.8 kW 480 V 8 kHz
Ip Degree Of Protection:
IP20 EN/IEC 60529 || IP20 EN/IEC 61800-5-1
Shock Resistance:
15 gn 11 ms EN/IEC 60028-2-27
Sustainable Offer Status:
Green Premium product
Overvoltage Category:
III
Communication Interface:
CANmotion, Integrated || CANopen, Integrated || Modbus, Integrated
Warranty:
18 months
Electrical Connection:
terminal 3 mm², AWG 12 CN8) || terminal 5 mm², AWG 10 CN1) || terminal 5 mm², AWG 10 CN10)
Safety Level:
SIL 3 EN/IEC 61508 || PL = e ISO 13849-1
Network Frequency:
47.5...63 Hz
Environmental Disclosure:
ENVPEP110705EN
Product Compatibility:
servo motor BMH 100 mm, 1 || servo motor BMH 70 mm, 3 || servo motor BSH 70 mm, 3 || servo motor BSH 100 mm, 1 || servo motor BMH 100 mm, 2 || servo motor BSH 100 mm, 2
Product Or Component Type:
motion servo drive
Supply Frequency:
50/60 Hz - 5...5 %
Status Led:
1 LED (Red) servo drive voltage || 1 LED error || 1 LED RUN
Format Of The Drive:
book
Type Of Cable:
single-strand IEC cable 50-50 °C) copper 90 °C XLPE/EPR
Discrete Output Type:
logic DO)24 V DC
Switching Frequency:
8 kHz
[Us] Rated Supply Voltage:
200...240 V - 15...10 % || 380...480 V - 15...10 %
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Device Short Name:
LXM32A
Emc Filter:
integrated
Depth:
237 mm
Discrete Output Voltage:
<= 30 V DC
Electromagnetic Compatibility:
conducted EMC, class A group 1 EN 55011 || conducted EMC, class A group 2 EN 55011 || conducted EMC, environment 2 category C3 EN/IEC 61800-3 || conducted EMC, category C2 EN/IEC 61800-3 || conducted EMC, environments 1 and 2 EN/IEC 61800-3 || electr
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
$1,715.88

Description

This product is part of the Lexium 32 range, an offer of motion servo drives for machines from 0.15kW to 7kW. The AC motion servo drive for one axis, features with an integrated EMC filter, compact drive with analogue inputs and pulse train. It provides 1 capture, 2 safety, 4 logic discrete inputs and 2 discrete outputs. Thanks to its compact design this servo drive enables to save on cabinet space and size, reduces the machine footprint and decreases costs. It is a motion servo drive with a rated supply voltage of 200V to 240V, 380V to 480V (three phase), a continuous output current of 6A at 8kHz and a continuous power of 3300W at 400V. It is furnished with terminal for electrical connection and three RJ45 connectors for CANmotion, CANopen, and Modbus, integrated communication interfaces. It is an IP20 rated product. Its dimensions are 48mm (Width) x 237mm (Depth) x 270mm (Height). It weighs 2kg. This product is certified by CE, CSA, RoHS, TUV and UL. It meets EN/IEC 61800-3 and EN/IEC 61800-5-1 standards. This product is compatible with servo motors BMH and BSH. Servo drive range with four servo drive models and two servo motor families plus an intelligent selection of options. It provides you with the drive and motor combination that has exactly the right power, performance and functionality.
View AllClose