Schneider Electric

Schneider Electric LXM32AD72N4 Lxm32A Can Rj45 72A Rms Peak 3Ph 480V

(No reviews yet) Write a Review
SKU:
LXM32AD72N4
UPC:
3606480216237
Condition:
New
Nominal Power:
5 kW 208 V 8 kHz || 7 kW 400 V 8 kHz || 7 kW 480 V 8 kHz
Circularity Profile:
ENVEOLI110605EN
Operating Altitude:
<= 3280.84 ft (1000 m) without derating || > 3280.84...9842.52 ft (> 1000...3000 m) with conditions
Height:
270 mm
Sustainable Offer Status:
Green Premium product
Response Time:
<= 5 ms compliment of STO_A, compliment of STO_B
Device Short Name:
LXM32A
Warranty:
18 months
Signalling Function:
display of faults 7 segments
Pvc Free:
Yes
Type Of Cooling:
integrated fan
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Response Time On Output:
250 µs DO)discrete
Safety Function:
STO (safe torque off), Integrated
Discrete Input Voltage:
24 V DC capture || 24 V DC logic || 24 V DC safety
Shock Resistance:
15 gn 11 ms EN/IEC 60028-2-27
Control Signal Type:
servo motor encoder feedback
Environmental Characteristic:
classes 3C1 IEC 60721-3-3
Ambient Air Temperature For Storage:
-25-70 °C
Discrete Output Logic:
positive or negative DO)EN/IEC 61131-2
Supply Voltage Limits:
170-264 V || 323-528 V
Discrete Input Type:
capture CAP || logic DI || safety compliment of STO_A, compliment of STO_B
Discrete Input Logic:
positive compliment of STO_A, compliment of STO_B)< 5 V > 15 V EN/IEC 61131-2 type 1 || positive DI)> 19 V < 9 V EN/IEC 61131-2 type 1 || positive or negative DI)< 5 V > 15 V EN/IEC 61131-2 type 1
Discrete Output Type:
logic DO)24 V DC
Relative Humidity:
Class 3K3 (5 to 85 %) without condensation IEC 60721-3-3
Output Current 3S Peak:
72 A 208 V 5 s || 72 A 480 V 5 s
Range Of Product:
Lexium 32
Number Of Addresses:
1-127 CANopen, CANmotion || 1-247 Modbus
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Status Led:
1 LED (Red) servo drive voltage || 1 LED error || 1 LED RUN
Electrical Isolation:
between power and control
Method Of Access:
slave
Product Compatibility:
servo motor BMH 140 mm, 2 || servo motor BMH 140 mm, 3 || servo motor BMH 190 mm, 1 || servo motor BMH 190 mm, 2 || servo motor BMH 190 mm, 3 || servo motor BMH 205 mm, 3 || servo motor BSH 140 mm, 2 || servo motor BSH 140 mm, 3 || servo motor BSH 14
Environmental Disclosure:
ENVPEP110705EN
Net Weight:
4.8 kg
Phase:
three phase
Switching Frequency:
8 kHz
Tightening Torque:
CN8 0.5-0.5 N.m || CN1 0.7-0.7 N.m || CN10 0.7-0.7 N.m
Product Certifications:
CSA || TÜV || UL
Type Of Cable:
single-strand IEC cable 50-50 °C) copper 90 °C XLPE/EPR
Braking Current:
50 mA
Transmission Rate:
1 Mbps 4-4 m CANopen, CANmotion || 125 kbps 500-500 m CANopen, CANmotion || 250 kbps 250-250 m CANopen, CANmotion || 50 kbps 1000-1000 m CANopen, CANmotion || 500 kbps 100-100 m CANopen, CANmotion || 9600, 19200, 38400 bps 40-40 m Modbus
Sampling Duration:
DI 0.25 ms discrete
Communication Interface:
CANmotion, Integrated || CANopen, Integrated || Modbus, Integrated
Operating Position:
vertical +/- 10 degree
Electrical Connection:
terminal 3 mm², AWG 12 CN8) || terminal 5 mm², AWG 10 CN1) || terminal 5 mm², AWG 10 CN10)
Protection Type:
against reverse polarity inputs signal || against short-circuits outputs signal
Depth:
237 mm
Rohs Exemption Information:
Yes
Width:
108 mm
Supply Frequency:
50/60 Hz - 5...5 %
Marking:
CE
Line Current:
21.1 A 34 % 208 V, with external line choke 1 mH || 22.5 A 45 % 400 V, with external line choke 1 mH || 19.5 A 55 % 480 V, with external line choke 1 mH || 21.9 A 106 % 208 V, without line choke || 17.3 A 126 % 400 V, without line choke || 14.6 A 129
Overvoltage Category:
III
Discrete Output Voltage:
<= 30 V DC
Contact Bounce Time:
<= 1 ms compliment of STO_A, compliment of STO_B || 2 µs CAP || 0.25 µs...1.5 ms DI
Ip Degree Of Protection:
IP20 EN/IEC 60529 || IP20 EN/IEC 61800-5-1
Discrete Input Number:
1 capture || 2 safety || 4 logic
[Us] Rated Supply Voltage:
200...240 V - 15...10 % || 380...480 V - 15...10 %
Safety Level:
SIL 3 EN/IEC 61508 || PL = e ISO 13849-1
Pollution Degree:
2 EN/IEC 61800-5-1
Network Frequency:
47.5...63 Hz
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Electromagnetic Compatibility:
conducted EMC, class A group 1 EN 55011 || conducted EMC, class A group 2 EN 55011 || conducted EMC, environment 2 category C3 EN/IEC 61800-3 || conducted EMC, category C2 EN/IEC 61800-3 || conducted EMC, environments 1 and 2 EN/IEC 61800-3 || electr
Discrete Output Number:
2
Connector Type:
RJ45 (labelled CN4 or CN5) CANmotion || RJ45 (labelled CN4 or CN5) CANopen || RJ45 (labelled CN7) Modbus
Ambient Air Temperature For Operation:
0-50 °C UL
Output Voltage:
<= power supply voltage
Maximum Leakage Current:
30 mA
Product Or Component Type:
motion servo drive
Communication Service:
1 receive SDO CANmotion || 1 transmit SDO CANmotion || 2 PDOs conforming to DSP 402 CANmotion || 2 SDOs receive CANopen || 2 SDOs send CANopen || 4 configurable mapping PDOs CANopen || CANopen device profile drives and motion control CANopen, CANmoti
Physical Interface:
2-wire RS485 multidrop Modbus
Emc Filter:
integrated
Continuous Output Current:
24 A 8 kHz
Format Of The Drive:
book
Standards:
EN/IEC 61800-3 || EN/IEC 61800-5-1
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Mercury Free:
Yes
Continuous Power:
6500 W 208 V || 13000 W 400 V || 13000 W 480 V
China Rohs Regulation:
X
Vibration Resistance:
1 gn 13-150 Hz)EN/IEC 60068-2-6 || 1.5 mm peak to peak 3-13 Hz)EN/IEC 60068-2-6
Datasheet:
View
$2,835.49

Description

This product is part of the Lexium 32 range, an offer of motion servo drives for machines from 0.15kW to 7kW. The AC motion servo drive for one axis, features with an integrated EMC filter, compact drive with analogue inputs and pulse train. It provides 1 capture, 2 safety, 4 logic discrete inputs and 2 discrete outputs. Thanks to its compact design this servo drive enables to save on cabinet space and size, reduces the machine footprint and decreases costs. It is a motion servo drive with a rated supply voltage of 200V to 240V, 380V to 480V (three phase), a continuous output current of 24A at 8kHz and a continuous power of 13000W at 400V. It is furnished with terminal for electrical connection and three RJ45 connectors for CANmotion, CANopen, and Modbus, integrated communication interfaces. It is an IP20 rated product. Its dimensions are 108mm (Width) x 237mm (Depth) x 270mm (Height). It weighs 4.8kg. This product is certified by CE, CSA, RoHS, TUV and UL. It meets EN/IEC 61800-3 and EN/IEC 61800-5-1 standards. This product is compatible with servo motors BMH and BSH. Servo drive range with four servo drive models and two servo motor families plus an intelligent selection of options. It provides you with the drive and motor combination that has exactly the right power, performance and functionality.
View AllClose

Related Products

Related Products