Schneider Electric LXM32MD18N4 Lxm32 Modular 18A Rms Peak 3Ph 480V

(No reviews yet) Write a Review
SKU:
LXM32MD18N4
UPC:
3606480076886
Condition:
New
Discrete Input Logic:
positive compliment of STO_A, compliment of STO_B)< 5 V > 15 V EN/IEC 61131-2 type 1 || positive DI)> 19 V < 9 V EN/IEC 61131-2 type 1 || positive or negative DI)< 5 V > 15 V EN/IEC 61131-2 type 1
Pollution Degree:
2 EN/IEC 61800-5-1
Circularity Profile:
ENVEOLI110605EN
Emc Filter:
integrated
Net Weight:
2.1 kg
Discrete Output Number:
3
Supply Frequency:
50/60 Hz - 5...5 %
Device Short Name:
LXM32M
Status Led:
1 LED (Red) servo drive voltage
Braking Current:
1.7 A
Type Of Cooling:
integrated fan
Switching Frequency:
8 kHz
Rohs Exemption Information:
Yes
Width:
68 mm
Operating Altitude:
<= 3280.84 ft (1000 m) without derating || > 3280.84...9842.52 ft (> 1000...3000 m) with conditions
Transmission Rate:
9600, 19200, 38400 bps 40-40 m Modbus
Marking:
CE
Product Or Component Type:
motion servo drive
[Us] Rated Supply Voltage:
200...240 V - 15...10 % || 380...480 V - 15...10 %
Sampling Duration:
DI 0.25 ms discrete || 0.25 ms
Response Time:
<= 5 ms compliment of STO_A, compliment of STO_B
Discrete Input Voltage:
24 V DC capture || 24 V DC logic || 24 V DC safety
China Rohs Regulation:
X
Range Of Product:
Lexium 32
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Physical Interface:
2-wire RS485 multidrop Modbus
Response Time On Output:
250 µs DO)discrete
Number Of Addresses:
1-247 Modbus
Continuous Power:
1700 W 208 V || 3300 W 400 V || 3300 W 480 V
Phase:
three phase
Ip Degree Of Protection:
IP20 EN/IEC 60529 || IP20 EN/IEC 61800-5-1
Continuous Output Current:
6 A 8 kHz
Product Certifications:
UL || TÜV || CSA
Ambient Air Temperature For Storage:
-25-70 °C
Discrete Output Type:
logic DO)24 V DC
Discrete Output Logic:
positive or negative DO)EN/IEC 61131-2
Format Of The Drive:
book
Ambient Air Temperature For Operation:
0-50 °C UL
Shock Resistance:
15 gn 11 ms EN/IEC 60028-2-27
Discrete Input Number:
2 capture || 2 safety || 4 logic
Electromagnetic Compatibility:
conducted EMC, class A group 1 EN 55011 || conducted EMC, class A group 2 EN 55011 || conducted EMC, environment 2 category C3 EN/IEC 61800-3 || conducted EMC, category C2 EN/IEC 61800-3 || conducted EMC, environments 1 and 2 EN/IEC 61800-3 || electr
Sustainable Offer Status:
Green Premium product
Discrete Input Type:
capture CAP || logic DI || safety compliment of STO_A, compliment of STO_B
Environmental Disclosure:
ENVPEP110705EN
Protection Type:
against reverse polarity inputs signal || against short-circuits outputs signal
Safety Level:
SIL 3 EN/IEC 61508 || PL = e ISO 13849-1
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Supply Voltage Limits:
170-264 V || 323-528 V
Network Frequency:
47.5...63 Hz
Vibration Resistance:
1 gn 13-150 Hz)EN/IEC 60068-2-6 || 1.5 mm peak to peak 3-13 Hz)EN/IEC 60068-2-6
Relative Humidity:
Class 3K3 (5 to 85 %) without condensation IEC 60721-3-3
Mercury Free:
Yes
Control Signal Type:
servo motor encoder feedback || pulse train output (PTO) RS422 <500 kHz <100 m || pulse/direction (P/D), A/B, CW/CCW 5 V, 24 V link (open collector) <10 kHz <1 m || pulse/direction (P/D), A/B, CW/CCW 5 V, 24 V link (push-pull) <200 kHz <10 m || pulse
Electrical Connection:
terminal 3 mm², AWG 12 CN8) || terminal 5 mm², AWG 10 CN1) || terminal 5 mm², AWG 10 CN10)
Depth:
237 mm
Discrete Output Voltage:
<= 30 V DC
Type Of Cable:
single-strand IEC cable 50-50 °C) copper 90 °C XLPE/EPR
Operating Position:
vertical +/- 10 degree
Line Current:
6 A 78 % 208 V, with external line choke 1 mH || 6.9 A 90 % 400 V, with external line choke 1 mH || 6 A 98 % 480 V, with external line choke 1 mH || 6.2 A 140 % 208 V, without line choke || 5.2 A 161 % 400 V, without line choke || 4.5 A 165 % 480 V,
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Overvoltage Category:
III
Maximum Leakage Current:
30 mA
Environmental Characteristic:
classes 3C1 IEC 60721-3-3
Pvc Free:
Yes
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Communication Interface:
Modbus, Integrated || CANopen, with separated communication card || CANmotion, with separated communication card || Ethernet/IP, with separated communication card || EtherCAT, with separated communication card || Profibus, with separated communicatio
Output Voltage:
<= power supply voltage
Safety Function:
STO (safe torque off), Integrated || SS1 (safe stop 1), with separated eSM safety card || SS2 (safe stop 2), with separated eSM safety card || SLS (safe limited speed), with separated eSM safety card || SOS (safe operating stop), with separated eSM s
Standards:
EN/IEC 61800-3 || EN/IEC 61800-5-1
Warranty:
18 months
Product Compatibility:
servo motor BMH 100 mm, 1 || servo motor BSH 70 mm, 2 || servo motor BMH 70 mm, 3 || servo motor BSH 100 mm, 1 || servo motor BMH 100 mm, 2 || servo motor BSH 100 mm, 2 || servo motor BMH 100 mm, 3 || servo motor BMH 140 mm, 1
Tightening Torque:
CN8 0.5-0.5 N.m || CN1 0.7-0.7 N.m || CN10 0.7-0.7 N.m
Signalling Function:
display of faults 7 segments
Contact Bounce Time:
<= 1 ms compliment of STO_A, compliment of STO_B || 2 µs CAP || 0.25 µs...1.5 ms DI
Electrical Isolation:
between power and control
Connector Type:
RJ45 (labelled CN7) Modbus
Height:
270 mm
Nominal Power:
1.2 kW 208 V 8 kHz || 1.8 kW 400 V 8 kHz || 1.8 kW 480 V 8 kHz
Output Current 3S Peak:
18 A 208 V 5 s || 18 A 480 V 5 s
Datasheet:
View
$1,715.49

Description

This Lexium 32 servo drive works at a rated supply voltage from 208Vac to 480Vac. It can feed 3-phase synchronous motors BMH or BSH, its continuous output current is 6A at 8kHz. The compact size of the servo drive and associated servo motor provides maximum power in the minimum space. This servo drive is specifically designed for industrial machines. It offers high performance, power and simplicity of use in motion control applications. It complies with international standards IEC/EN 61800-5-1, IEC/EN 61800-3, and is UL and CSA certified and CE marked. It has been developed to meet the requirements of directives regarding protection of the environment (RoHS).
View AllClose