Schneider Electric LXM32MU45M2 Lxm32 Modular 4,5A Rms Peak 1Ph 230V

(No reviews yet) Write a Review
SKU:
LXM32MU45M2
UPC:
3606480076824
Condition:
New
Maximum Leakage Current:
30 mA
Phase:
single phase
Marking:
CE
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Product Or Component Type:
motion servo drive
Transmission Rate:
9600, 19200, 38400 bps 40-40 m Modbus
Ambient Air Temperature For Operation:
0-50 °C UL
Product Compatibility:
servo motor BSH 55 mm, 1
Range Of Product:
Lexium 32
Electrical Connection:
terminal 3 mm², AWG 12 CN8) || terminal 5 mm², AWG 10 CN1) || terminal 5 mm², AWG 10 CN10)
Rohs Exemption Information:
Yes
Discrete Input Logic:
positive compliment of STO_A, compliment of STO_B)< 5 V > 15 V EN/IEC 61131-2 type 1 || positive DI)> 19 V < 9 V EN/IEC 61131-2 type 1 || positive or negative DI)< 5 V > 15 V EN/IEC 61131-2 type 1
Discrete Input Number:
2 capture || 2 safety || 4 logic
Connector Type:
RJ45 (labelled CN7) Modbus
Operating Position:
vertical +/- 10 degree
Width:
68 mm
Response Time:
<= 5 ms compliment of STO_A, compliment of STO_B
Signalling Function:
display of faults 7 segments
Sustainable Offer Status:
Green Premium product
Height:
270 mm
Number Of Addresses:
1-247 Modbus
Type Of Cooling:
natural convection
Protection Type:
against reverse polarity inputs signal || against short-circuits outputs signal
Depth:
237 mm
Relative Humidity:
Class 3K3 (5 to 85 %) without condensation IEC 60721-3-3
Sampling Duration:
DI 0.25 ms discrete || 0.25 ms
Electrical Isolation:
between power and control
Product Certifications:
CSA || UL || TÜV
Physical Interface:
2-wire RS485 multidrop Modbus
Control Signal Type:
servo motor encoder feedback || pulse train output (PTO) RS422 <500 kHz <100 m || pulse/direction (P/D), A/B, CW/CCW 5 V, 24 V link (open collector) <10 kHz <1 m || pulse/direction (P/D), A/B, CW/CCW 5 V, 24 V link (push-pull) <200 kHz <10 m || pulse
Braking Current:
50 mA
Safety Function:
STO (safe torque off), Integrated || SS1 (safe stop 1), with separated eSM safety card || SS2 (safe stop 2), with separated eSM safety card || SLS (safe limited speed), with separated eSM safety card || SOS (safe operating stop), with separated eSM s
Line Current:
2.6 A 85 % 115 V, with external line choke 5 mH || 3.4 A 100 % 230 V, with external line choke 5 mH || 2.9 A 173 % 115 V, without line choke || 2.9 A 181 % 230 V, without line choke
Electromagnetic Compatibility:
conducted EMC, class A group 1 EN 55011 || conducted EMC, class A group 2 EN 55011 || conducted EMC, environment 2 category C3 EN/IEC 61800-3 || conducted EMC, category C2 EN/IEC 61800-3 || conducted EMC, environments 1 and 2 EN/IEC 61800-3 || electr
Status Led:
1 LED (Red) servo drive voltage
Standards:
EN/IEC 61800-5-1 || EN/IEC 61800-3
Vibration Resistance:
1 gn 13-150 Hz)EN/IEC 60068-2-6 || 1.5 mm peak to peak 3-13 Hz)EN/IEC 60068-2-6
Net Weight:
1.7 kg
Switching Frequency:
8 kHz
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Emc Filter:
integrated
Safety Level:
SIL 3 EN/IEC 61508 || PL = e ISO 13849-1
Discrete Input Voltage:
24 V DC capture || 24 V DC logic || 24 V DC safety
Environmental Characteristic:
classes 3C1 IEC 60721-3-3
Output Current 3S Peak:
3 A 115 V 5 s || 4.5 A 230 V 5 s
Format Of The Drive:
book
Communication Interface:
Modbus, Integrated || CANopen, with separated communication card || CANmotion, with separated communication card || Ethernet/IP, with separated communication card || EtherCAT, with separated communication card || Profibus, with separated communicatio
Supply Voltage Limits:
85-132 V || 170-264 V
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Discrete Output Logic:
positive or negative DO)EN/IEC 61131-2
Mercury Free:
Yes
Discrete Output Number:
3
Overvoltage Category:
III
Tightening Torque:
CN8 0.5-0.5 N.m || CN1 0.7-0.7 N.m || CN10 0.7-0.7 N.m
Device Short Name:
LXM32M
Pvc Free:
Yes
Operating Altitude:
<= 3280.84 ft (1000 m) without derating || > 3280.84...9842.52 ft (> 1000...3000 m) with conditions
Output Voltage:
<= power supply voltage
Warranty:
18 months
Response Time On Output:
250 µs DO)discrete
Environmental Disclosure:
ENVPEP110705EN
Supply Frequency:
50/60 Hz - 5...5 %
Continuous Power:
200 W 115 V || 500 W 230 V
Discrete Output Type:
logic DO)24 V DC
China Rohs Regulation:
X
Pollution Degree:
2 EN/IEC 61800-5-1
Type Of Cable:
single-strand IEC cable 50-50 °C) copper 90 °C XLPE/EPR
Shock Resistance:
15 gn 11 ms EN/IEC 60028-2-27
Discrete Input Type:
capture CAP || logic DI || safety compliment of STO_A, compliment of STO_B
Contact Bounce Time:
<= 1 ms compliment of STO_A, compliment of STO_B || 2 µs CAP || 0.25 µs...1.5 ms DI
Ambient Air Temperature For Storage:
-25-70 °C
Continuous Output Current:
1.5 A 8 kHz
[Us] Rated Supply Voltage:
100...120 V - 15...10 % || 200...240 V - 15...10 %
Ip Degree Of Protection:
IP20 EN/IEC 60529 || IP20 EN/IEC 61800-5-1
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Discrete Output Voltage:
<= 30 V DC
Circularity Profile:
ENVEOLI110605EN
Nominal Power:
0.15 kW 115 V 8 kHz || 0.3 kW 230 V 8 kHz
Network Frequency:
47.5...63 Hz
$1,118.56

Description

This product is part of the Lexium 32 range, an offer of motion servo drives for machines from 0.15kW to 7kW. The AC motion servo drive for one axis, features with an integrated EMC filter, compact drive with analogue inputs and pulse train. It provides 2 capture, 2 safety, 4 logic discrete inputs and 3 discrete outputs. Thanks to its compact design this servo drive enables to save on cabinet space and size, reduces the machine footprint and decreases costs. It is a motion servo drive with a rated supply voltage of 100V to 120V, 200V to 240V (single phase), a continuous output current of 1.5A at 8kHz and a continuous power of 500W at 230V. It is furnished with terminal for electrical connection and RJ45 connector for Modbus integrated communication interface. CANopen, CANmotion, Ethernet/IP, EtherCAT, Profibus, DeviceNet possible with option card. It is an IP20 rated product. Its dimensions are 68mm (Width) x 237mm (Depth) x 270mm (Height). It weighs 1.7kg. This product is certified by CE, CSA, RoHS, TUV and UL. It meets EN/IEC 61800-3 and EN/IEC 61800-5-1 standards. This product is compatible with servo motor BSH. Servo drive range with four servo drive models and two servo motor families plus an intelligent selection of options. It provides you with the drive and motor combination that has exactly the right power, performance and functionality.
View AllClose