Schneider Electric LXM32MU60N4 Lxm32 Modular 6A Rms Peak 3Ph 480V

(No reviews yet) Write a Review
SKU:
LXM32MU60N4
UPC:
3.60648E+12
Condition:
New
Discrete Output Type:
logic DO)24 V DC
Discrete Input Voltage:
24 V DC capture || 24 V DC logic || 24 V DC safety
Discrete Input Number:
2 capture || 2 safety || 4 logic
Overvoltage Category:
III
Line Current:
1.7 A 97 % 208 V, with external line choke 2 mH || 1.8 A 108 % 400 V, with external line choke 2 mH || 1.6 A 116 % 480 V, with external line choke 2 mH || 1.8 A 132 % 208 V, without line choke || 1.4 A 191 % 400 V, without line choke || 1.2 A 201 % 4
Phase:
three phase
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Contact Bounce Time:
<= 1 ms compliment of STO_A, compliment of STO_B || 2 µs CAP || 0.25 µs...1.5 ms DI
Control Signal Type:
servo motor encoder feedback || pulse train output (PTO) RS422 <500 kHz <100 m || pulse/direction (P/D), A/B, CW/CCW 5 V, 24 V link (open collector) <10 kHz <1 m || pulse/direction (P/D), A/B, CW/CCW 5 V, 24 V link (push-pull) <200 kHz <10 m || pulse
Discrete Input Logic:
positive compliment of STO_A, compliment of STO_B)< 5 V > 15 V EN/IEC 61131-2 type 1 || positive DI)> 19 V < 9 V EN/IEC 61131-2 type 1 || positive or negative DI)< 5 V > 15 V EN/IEC 61131-2 type 1
Sustainable Offer Status:
Green Premium product
Standards:
EN/IEC 61800-3 || EN/IEC 61800-5-1
Number Of Addresses:
1-247 Modbus
Output Current 3S Peak:
6 A 208 V 5 s || 6 A 480 V 5 s
Supply Voltage Limits:
170-264 V || 323-528 V
Output Voltage:
<= power supply voltage
Discrete Output Number:
3
Communication Interface:
Modbus, Integrated || CANopen, with separated communication card || CANmotion, with separated communication card || Ethernet/IP, with separated communication card || EtherCAT, with separated communication card || Profibus, with separated communicatio
Ip Degree Of Protection:
IP20 EN/IEC 60529 || IP20 EN/IEC 61800-5-1
Signalling Function:
display of faults 7 segments
Ambient Air Temperature For Operation:
0-50 °C UL
Status Led:
1 LED (Red) servo drive voltage
Range Of Product:
Lexium 32
Shock Resistance:
15 gn 11 ms EN/IEC 60028-2-27
Net Weight:
1.8 kg
Pollution Degree:
2 EN/IEC 61800-5-1
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Nominal Power:
0.35 kW 208 V 8 kHz || 0.4 kW 400 V 8 kHz || 0.4 kW 480 V 8 kHz
Format Of The Drive:
book
Relative Humidity:
Class 3K3 (5 to 85 %) without condensation IEC 60721-3-3
Warranty:
18 months
Network Frequency:
47.5...63 Hz
Electrical Connection:
terminal 3 mm², AWG 12 CN8) || terminal 5 mm², AWG 10 CN1) || terminal 5 mm², AWG 10 CN10)
Sampling Duration:
DI 0.25 ms discrete || 0.25 ms
Ambient Air Temperature For Storage:
-25-70 °C
Electromagnetic Compatibility:
conducted EMC, class A group 1 EN 55011 || conducted EMC, class A group 2 EN 55011 || conducted EMC, environment 2 category C3 EN/IEC 61800-3 || conducted EMC, category C2 EN/IEC 61800-3 || conducted EMC, environments 1 and 2 EN/IEC 61800-3 || electr
Type Of Cooling:
natural convection
Safety Level:
SIL 3 EN/IEC 61508 || PL = e ISO 13849-1
Electrical Isolation:
between power and control
Continuous Output Current:
1.5 A 8 kHz
Operating Position:
vertical +/- 10 degree
Discrete Input Type:
capture CAP || logic DI || safety compliment of STO_A, compliment of STO_B
Response Time:
<= 5 ms compliment of STO_A, compliment of STO_B
Product Or Component Type:
motion servo drive
Operating Altitude:
<= 3280.84 ft (1000 m) without derating || > 3280.84...9842.52 ft (> 1000...3000 m) with conditions
Physical Interface:
2-wire RS485 multidrop Modbus
Marking:
CE
[Us] Rated Supply Voltage:
200...240 V - 15...10 % || 380...480 V - 15...10 %
Height:
270 mm
Circularity Profile:
ENVEOLI110605EN
Safety Function:
STO (safe torque off), Integrated || SS1 (safe stop 1), with separated eSM safety card || SS2 (safe stop 2), with separated eSM safety card || SLS (safe limited speed), with separated eSM safety card || SOS (safe operating stop), with separated eSM s
Connector Type:
RJ45 (labelled CN7) Modbus
Continuous Power:
400 W 208 V || 800 W 400 V || 800 W 480 V
Discrete Output Logic:
positive or negative DO)EN/IEC 61131-2
Device Short Name:
LXM32M
Mercury Free:
Yes
Depth:
237 mm
Environmental Characteristic:
classes 3C1 IEC 60721-3-3
China Rohs Regulation:
X
Vibration Resistance:
1 gn 13-150 Hz)EN/IEC 60068-2-6 || 1.5 mm peak to peak 3-13 Hz)EN/IEC 60068-2-6
Protection Type:
against reverse polarity inputs signal || against short-circuits outputs signal
Emc Filter:
integrated
Transmission Rate:
9600, 19200, 38400 bps 40-40 m Modbus
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Environmental Disclosure:
ENVPEP110705EN
Response Time On Output:
250 µs DO)discrete
Width:
68 mm
Supply Frequency:
50/60 Hz - 5...5 %
Product Certifications:
UL || TÜV || CSA
Discrete Output Voltage:
<= 30 V DC
Product Compatibility:
servo motor BMH 70 mm, 1 || servo motor BSH 55 mm, 3 || servo motor BSH 55 mm, 1 || servo motor BSH 55 mm, 2
Braking Current:
50 mA
Maximum Leakage Current:
30 mA
Pvc Free:
Yes
Rohs Exemption Information:
Yes
Switching Frequency:
8 kHz
Type Of Cable:
single-strand IEC cable 50-50 °C) copper 90 °C XLPE/EPR
Tightening Torque:
CN8 0.5-0.5 N.m || CN1 0.7-0.7 N.m || CN10 0.7-0.7 N.m
  • Schneider Electric LXM32MU60N4 Lxm32 Modular 6A Rms Peak 3Ph 480V
  • Schneider Electric LXM32MU60N4 Lxm32 Modular 6A Rms Peak 3Ph 480V
$1,398.64

Description

This product is part of the Lexium 32 range, an offer of motion servo drives for machines from 0.15kW to 7kW. The AC motion servo drive for one axis, features with an integrated EMC filter, compact drive with analogue inputs and pulse train. It provides 2 capture, 2 safety, 4 logic discrete inputs and 3 discrete outputs. Thanks to its compact design this servo drive enables to save on cabinet space and size, reduces the machine footprint and decreases costs. It is a motion servo drive with a rated supply voltage of 200V to 240V, 380V to 480V (three phase), a continuous output current of 1.5A at 8kHz and a continuous power of 800W at 400V. It is furnished with terminal for electrical connection and RJ45 connector for Modbus integrated communication interface. CANopen, CANmotion, Ethernet/IP, EtherCAT, Profibus, DeviceNet possible with option card. It is an IP20 rated product. Its dimensions are 68mm (Width) x 237mm (Depth) x 270mm (Height). It weighs 1.8kg. This product is certified by CE, CSA, RoHS, TUV and UL. It meets EN/IEC 61800-3 and EN/IEC 61800-5-1 standards. This product is compatible with servo motors BMH and BSH. Servo drive range with four servo drive models and two servo motor families plus an intelligent selection of options. It provides you with the drive and motor combination that has exactly the right power, performance and functionality.
View AllClose