Schneider Electric

Schneider Electric LXM32SD12N4 Lxm32S Servo Drive Sercos 208#480V Tri 3

(No reviews yet) Write a Review
SKU:
LXM32SD12N4
UPC:
3606480694745
Condition:
New
Emc Filter:
integrated
Warranty:
18 months
China Rohs Regulation:
X
Operating Position:
vertical +/- 10 degree
Response Time On Output:
250 µs DO)discrete
Format Of The Drive:
book
Ip Degree Of Protection:
IP20 EN/IEC 60529
Width:
68 mm
Vibration Resistance:
1 gn 13-150 Hz)EN/IEC 60068-2-6
Connector Type:
RJ45 (labelled CN7) Modbus
Sustainable Offer Status:
Green Premium product
Height:
270 mm
[Us] Rated Supply Voltage:
200...240 V - 15...10 % || 380...480 V - 15...10 %
Safety Level:
SIL 3 EN/IEC 61508
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Maximum Leakage Current:
30 mA
Electromagnetic Compatibility:
conducted EMC EN 55011 class A group 1
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Discrete Input Voltage:
24 V DC capture
Output Voltage:
<= power supply voltage
Type Of Cable:
single-strand IEC cable 50-50 °C) copper 90 °C XLPE/EPR
Nominal Power:
0.7 kW 208 V 8 kHz || 0.9 kW 400 V 8 kHz || 0.9 kW 480 V 8 kHz
Net Weight:
1.9 kg
Standards:
EN/IEC 61800-3
Supply Frequency:
50/60 Hz - 5...5 %
Ambient Air Temperature For Operation:
0-50 °C UL
Ambient Air Temperature For Storage:
-25-70 °C
Discrete Output Number:
3
Phase:
three phase
Discrete Output Voltage:
<= 30 V DC
Discrete Output Type:
logic DO)24 V DC
Supply Voltage Limits:
170-264 V || 323-528 V
Transmission Rate:
9600, 19200, 38400 bps 40-40 m Modbus
Marking:
CE
Electrical Isolation:
between power and control
Environmental Disclosure:
ENVPEP110705EN
Contact Bounce Time:
<= 1 ms compliment of STO_A, compliment of STO_B
Product Certifications:
CSA
Device Short Name:
LXM32S
Product Compatibility:
servo motor BMH 70 mm, 1
Environmental Characteristic:
classes 3C1 IEC 60721-3-3
Switching Frequency:
8 kHz
Tightening Torque:
CN8 0.5-0.5 N.m
Electrical Connection:
terminal 3 mm², AWG 12 CN8)
Relative Humidity:
Class 3K3 (5 to 85 %) without condensation IEC 60721-3-3
Response Time:
<= 5 ms compliment of STO_A, compliment of STO_B
Signalling Function:
display of faults 7 segments
Status Led:
1 LED (Red) servo drive voltage
Shock Resistance:
15 gn 11 ms EN/IEC 60028-2-27
Sampling Duration:
0.25 ms
Range Of Product:
Lexium 32
Braking Current:
50 mA
Network Frequency:
47.5...63 Hz
Line Current:
3.1 A 79 % 208 V, with external line choke 2 mH || 3.4 A 90 % 400 V, with external line choke 2 mH || 2.9 A 98 % 480 V, with external line choke 2 mH || 3.6 A 136 % 208 V, without line choke || 2.9 A 177 % 400 V, without line choke || 2.4 A 182 % 480
Discrete Output Logic:
positive or negative DO)EN/IEC 61131-2
Output Current 3S Peak:
12 A 208 V 5 s || 12 A 480 V 5 s
Type Of Cooling:
integrated fan
Operating Altitude:
<= 3280.84 ft (1000 m) without derating
Circularity Profile:
ENVEOLI110605EN
Physical Interface:
2-wire RS485 multidrop Modbus
Mercury Free:
Yes
Overvoltage Category:
III
Continuous Power:
800 W 208 V || 1600 W 400 V || 1600 W 480 V
Discrete Input Number:
2 capture
Depth:
237 mm
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Number Of Addresses:
1-247 Modbus
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Rohs Exemption Information:
Yes
Safety Function:
STO (safe torque off), Integrated
Discrete Input Type:
capture CAP
Continuous Output Current:
3 A 8 kHz
Pollution Degree:
2 EN/IEC 61800-5-1
Discrete Input Logic:
positive compliment of STO_A, compliment of STO_B)< 5 V > 15 V EN/IEC 61131-2 type 1
Pvc Free:
Yes
Communication Interface:
Modbus, Integrated || SERCOS III, Integrated
Product Or Component Type:
motion servo drive
Datasheet:
View
$1,817.01

Description

This product is part of the Lexium 32 range, an offer of motion servo drives for machines from 0.15kW to 7kW. The AC motion servo drive for one axis, features with an integrated EMC filter, compact drive with analogue inputs and pulse train. It provides 2 capture discrete inputs and 3 discrete outputs. Thanks to its compact design this servo drive enables to save on cabinet space and size, reduces the machine footprint and decreases costs. It is a motion servo drive with a rated supply voltage of 200V to 240V, 380V to 480V (three phase), a continuous output current of 3A at 8kHz and a continuous power of 800W at 230V. It is furnished with terminal for electrical connection and RJ45 connector for Modbus and SERCOS III integrated communication interfaces. It is an IP20 rated product. Its dimensions are 68mm (Width) x 237mm (Depth) x 270mm (Height). It weighs 1.9kg. This product is certified by CE and CSA. It meets EN/IEC 61800-3 standards. This product is compatible with servo motor BMH. Servo drive range with four servo drive models and two servo motor families plus an intelligent selection of options. It provides you with the drive and motor combination that has exactly the right power, performance and functionality.
View AllClose

Related Products

Related Products