Schneider Electric

Schneider Electric LXM32SD18N4 Lxm32S Servo Drive Sercos 208#480V Tri 6

(No reviews yet) Write a Review
SKU:
LXM32SD18N4
UPC:
3606480694769
Condition:
New
Format Of The Drive:
book
Sampling Duration:
0.25 ms
Nominal Power:
1.2 kW 208 V 8 kHz || 1.8 kW 400 V 8 kHz || 1.8 kW 480 V 8 kHz
Discrete Input Type:
capture CAP
Ambient Air Temperature For Storage:
-25-70 °C
Number Of Addresses:
1-247 Modbus
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Output Voltage:
<= power supply voltage
Marking:
CE
Range Of Product:
Lexium 32
Safety Level:
SIL 3 EN/IEC 61508
Product Or Component Type:
motion servo drive
Contact Bounce Time:
<= 1 ms compliment of STO_A, compliment of STO_B
Type Of Cooling:
integrated fan
Type Of Cable:
single-strand IEC cable 50-50 °C) copper 90 °C XLPE/EPR
Switching Frequency:
8 kHz
Discrete Output Type:
logic DO)24 V DC
Tightening Torque:
CN8 0.5-0.5 N.m
Status Led:
1 LED (Red) servo drive voltage
Pollution Degree:
2 EN/IEC 61800-5-1
Continuous Output Current:
6 A 8 kHz
Discrete Input Number:
2 capture
Product Compatibility:
servo motor BMH 100 mm, 1
Shock Resistance:
15 gn 11 ms EN/IEC 60028-2-27
Supply Voltage Limits:
170-264 V || 323-528 V
Line Current:
6 A 78 % 208 V, with external line choke 1 mH || 6.9 A 90 % 400 V, with external line choke 1 mH || 6 A 98 % 480 V, with external line choke 1 mH || 6.2 A 140 % 208 V, without line choke || 5.2 A 161 % 400 V, without line choke || 4.5 A 165 % 480 V,
Discrete Input Logic:
positive compliment of STO_A, compliment of STO_B)< 5 V > 15 V EN/IEC 61131-2 type 1
Discrete Output Number:
3
Width:
68 mm
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Ambient Air Temperature For Operation:
0-50 °C UL
Height:
270 mm
Response Time On Output:
250 µs DO)discrete
Network Frequency:
47.5...63 Hz
Continuous Power:
1700 W 208 V || 3300 W 400 V || 3300 W 480 V
Sustainable Offer Status:
Green Premium product
Discrete Input Voltage:
24 V DC capture
Rohs Exemption Information:
Yes
Connector Type:
RJ45 (labelled CN7) Modbus
Electromagnetic Compatibility:
conducted EMC EN 55011 class A group 1
Output Current 3S Peak:
18 A 208 V 5 s || 18 A 480 V 5 s
Standards:
EN/IEC 61800-3
Device Short Name:
LXM32S
Discrete Output Logic:
positive or negative DO)EN/IEC 61131-2
Safety Function:
STO (safe torque off), Integrated
Braking Current:
50 mA
Product Certifications:
CSA
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Relative Humidity:
Class 3K3 (5 to 85 %) without condensation IEC 60721-3-3
Net Weight:
2.1 kg
Supply Frequency:
50/60 Hz - 5...5 %
[Us] Rated Supply Voltage:
200...240 V - 15...10 % || 380...480 V - 15...10 %
Pvc Free:
Yes
Phase:
three phase
Electrical Connection:
terminal 3 mm², AWG 12 CN8)
Ip Degree Of Protection:
IP20 EN/IEC 60529
Transmission Rate:
9600, 19200, 38400 bps 40-40 m Modbus
Mercury Free:
Yes
Maximum Leakage Current:
30 mA
Environmental Disclosure:
ENVPEP110705EN
Warranty:
18 months
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Emc Filter:
integrated
Environmental Characteristic:
classes 3C1 IEC 60721-3-3
Depth:
237 mm
Vibration Resistance:
1 gn 13-150 Hz)EN/IEC 60068-2-6
Operating Position:
vertical +/- 10 degree
Electrical Isolation:
between power and control
Signalling Function:
display of faults 7 segments
Circularity Profile:
ENVEOLI110605EN
Communication Interface:
Modbus, Integrated || SERCOS III, Integrated
Discrete Output Voltage:
<= 30 V DC
Operating Altitude:
<= 3280.84 ft (1000 m) without derating
Overvoltage Category:
III
China Rohs Regulation:
X
Response Time:
<= 5 ms compliment of STO_A, compliment of STO_B
Physical Interface:
2-wire RS485 multidrop Modbus
Datasheet:
View
$1,993.81

Description

This product is part of the Lexium 32 range, an offer of motion servo drives for machines from 0.15kW to 7kW. The AC motion servo drive for one axis, features with an integrated EMC filter, compact drive with analogue inputs and pulse train. It provides 2 capture discrete inputs and 3 discrete outputs. Thanks to its compact design this servo drive enables to save on cabinet space and size, reduces the machine footprint and decreases costs. It is a motion servo drive with a rated supply voltage of 200V to 240V, 380V to 480V (three phase), a continuous output current of 6A at 8kHz and a continuous power of 1500W at 230V. It is furnished with terminal for electrical connection and RJ45 connector for Modbus and SERCOS III integrated communication interfaces. It is an IP20 rated product. Its dimensions are 68mm (Width) x 237mm (Depth) x 270mm (Height). It weighs 2.1kg. This product is certified by CE and CSA. It meets EN/IEC 61800-3 standards. This product is compatible with servo motor BMH. Servo drive range with four servo drive models and two servo motor families plus an intelligent selection of options. It provides you with the drive and motor combination that has exactly the right power, performance and functionality.
View AllClose