Schneider Electric LXM32SD30M2 Lxm32S Servo Drive Sercos 200#240V Tri 1

(No reviews yet) Write a Review
SKU:
LXM32SD30M2
UPC:
3.60648E+12
Condition:
New
Supply Voltage Limits:
85-132 V || 170-264 V
Supply Frequency:
50/60 Hz - 5...5 %
Sampling Duration:
0.25 ms
Net Weight:
2.1 kg
Transmission Rate:
9600, 19200, 38400 bps 40-40 m Modbus
Depth:
237 mm
Width:
68 mm
Range Of Product:
Lexium 32
Environmental Disclosure:
ENVPEP110705EN
Discrete Input Number:
2 capture
Discrete Output Number:
3
Environmental Characteristic:
classes 3C1 IEC 60721-3-3
Output Current 3S Peak:
15 A 115 V 5 s || 30 A 230 V 5 s
Ip Degree Of Protection:
IP20 EN/IEC 60529
Circularity Profile:
ENVEOLI110605EN
Continuous Power:
800 W 115 V || 2200 W 230 V
Type Of Cooling:
integrated fan
Product Compatibility:
servo motor BMH 70 mm, 2
Tightening Torque:
CN8 0.5-0.5 N.m
Height:
270 mm
Device Short Name:
LXM32S
Emc Filter:
integrated
Phase:
single phase
Discrete Output Voltage:
<= 30 V DC
Ambient Air Temperature For Operation:
0-50 °C UL
Continuous Output Current:
10 A 8 kHz
Contact Bounce Time:
<= 1 ms compliment of STO_A, compliment of STO_B
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Standards:
EN/IEC 61800-3
Electromagnetic Compatibility:
conducted EMC EN 55011 class A group 1
Discrete Output Type:
logic DO)24 V DC
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Operating Altitude:
<= 3280.84 ft (1000 m) without derating
Sustainable Offer Status:
Green Premium product
Discrete Input Type:
capture CAP
Nominal Power:
0.8 kW 115 V 8 kHz || 1.6 kW 230 V 8 kHz
Switching Frequency:
8 kHz
Shock Resistance:
15 gn 11 ms EN/IEC 60028-2-27
Ambient Air Temperature For Storage:
-25-70 °C
Line Current:
9.9 A 72 % 115 V, with external line choke 2 mH || 14.1 A 86 % 230 V, with external line choke 2 mH || 12.9 A 135 % 115 V, without line choke || 12.7 A 135 % 230 V, without line choke
Electrical Connection:
terminal 3 mm², AWG 12 CN8)
Vibration Resistance:
1 gn 13-150 Hz)EN/IEC 60068-2-6
Mercury Free:
Yes
Number Of Addresses:
1-247 Modbus
Discrete Input Logic:
positive compliment of STO_A, compliment of STO_B)< 5 V > 15 V EN/IEC 61131-2 type 1
Status Led:
1 LED (Red) servo drive voltage
Connector Type:
RJ45 (labelled CN7) Modbus
Operating Position:
vertical +/- 10 degree
Type Of Cable:
single-strand IEC cable 50-50 °C) copper 90 °C XLPE/EPR
Output Voltage:
<= power supply voltage
Pvc Free:
Yes
Safety Level:
SIL 3 EN/IEC 61508
Electrical Isolation:
between power and control
Overvoltage Category:
III
Response Time On Output:
250 µs DO)discrete
Signalling Function:
display of faults 7 segments
Safety Function:
STO (safe torque off), Integrated
Marking:
CE
Format Of The Drive:
book
Discrete Output Logic:
positive or negative DO)EN/IEC 61131-2
Warranty:
18 months
Product Certifications:
CSA
Pollution Degree:
2 EN/IEC 61800-5-1
Physical Interface:
2-wire RS485 multidrop Modbus
Network Frequency:
47.5...63 Hz
China Rohs Regulation:
X
Relative Humidity:
Class 3K3 (5 to 85 %) without condensation IEC 60721-3-3
[Us] Rated Supply Voltage:
100...120 V - 15...10 % || 200...240 V - 15...10 %
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Maximum Leakage Current:
30 mA
Response Time:
<= 5 ms compliment of STO_A, compliment of STO_B
Product Or Component Type:
motion servo drive
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Communication Interface:
Modbus, Integrated || SERCOS III, Integrated
Braking Current:
50 mA
Rohs Exemption Information:
Yes
Discrete Input Voltage:
24 V DC capture
  • Schneider Electric LXM32SD30M2 Lxm32S Servo Drive Sercos 200#240V Tri 1
  • Schneider Electric LXM32SD30M2 Lxm32S Servo Drive Sercos 200#240V Tri 1
$2,027.08

Description

This product is part of the Lexium 32 range, an offer of servo drives from 0.15kW to 7kW. The motion servo drive features integrated EMC filter. It offers 2 capture discrete inputs. It is a motion servo drive with a rated supply voltage of 100V to 120V, 200V to 240V, a continuous output current of 10A at 8kHz and a continuous power of 800W at 115V. It is furnished with RJ45 connector (labelled CN7) for Modbus. It offers electrical isolation between power and control. It provides Modbus and SERCOS III communication interface. It is an IP20 rated product. Its dimensions are 68mm (width) x 237mm (depth) x 270mm (height). It weighs 2.1kg. This product is certified by CSA. It meets EN/IEC 61800-3 standards. This product is compatible with servo motor BMH (70mm, 2 motor stacks). Lexium 32 is a servo drive range provides drive and motor combination that has exactly the right power, performance and functionality. The Lexium 32 range of servo drives includes four servo drive models with power ratings from 0.15kW to 11kW and the servo motor ranges BMH and BSH series.
View AllClose