Schneider Electric LXM32SU60N4 Lxm32S Servo Drive Sercos 208#480V Tri 1

(No reviews yet) Write a Review
SKU:
LXM32SU60N4
UPC:
3606480694813
Condition:
New
Output Current 3S Peak:
6 A 208 V 5 s || 6 A 480 V 5 s
Shock Resistance:
15 gn 11 ms EN/IEC 60028-2-27
[Us] Rated Supply Voltage:
200...240 V - 15...10 % || 380...480 V - 15...10 %
Warranty:
18 months
Ambient Air Temperature For Storage:
-25-70 °C
Safety Function:
STO (safe torque off), Integrated
Braking Current:
50 mA
Width:
68 mm
Electrical Isolation:
between power and control
Operating Altitude:
<= 3280.84 ft (1000 m) without derating
Supply Voltage Limits:
170-264 V || 323-528 V
Type Of Cable:
single-strand IEC cable 50-50 °C) copper 90 °C XLPE/EPR
Relative Humidity:
Class 3K3 (5 to 85 %) without condensation IEC 60721-3-3
Contact Bounce Time:
<= 1 ms compliment of STO_A, compliment of STO_B
Pvc Free:
Yes
Response Time On Output:
250 µs DO)discrete
Discrete Input Logic:
positive compliment of STO_A, compliment of STO_B)< 5 V > 15 V EN/IEC 61131-2 type 1
Discrete Input Number:
2 capture
Signalling Function:
display of faults 7 segments
Electromagnetic Compatibility:
conducted EMC EN 55011 class A group 1
Standards:
EN/IEC 61800-3
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Product Compatibility:
servo motor BMH 70 mm, 1
Discrete Input Voltage:
24 V DC capture
Tightening Torque:
CN8 0.5-0.5 N.m
Format Of The Drive:
book
Environmental Disclosure:
ENVPEP110705EN
Marking:
CE
Device Short Name:
LXM32S
Safety Level:
SIL 3 EN/IEC 61508
Communication Interface:
Modbus, Integrated || SERCOS III, Integrated
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Type Of Cooling:
natural convection
Height:
270 mm
Physical Interface:
2-wire RS485 multidrop Modbus
Pollution Degree:
2 EN/IEC 61800-5-1
Environmental Characteristic:
classes 3C1 IEC 60721-3-3
China Rohs Regulation:
X
Depth:
237 mm
Transmission Rate:
9600, 19200, 38400 bps 40-40 m Modbus
Status Led:
1 LED (Red) servo drive voltage
Ambient Air Temperature For Operation:
0-50 °C UL
Phase:
three phase
Supply Frequency:
50/60 Hz - 5...5 %
Continuous Output Current:
1.5 A 8 kHz
Product Certifications:
CSA
Maximum Leakage Current:
30 mA
Response Time:
<= 5 ms compliment of STO_A, compliment of STO_B
Sampling Duration:
0.25 ms
Network Frequency:
47.5...63 Hz
Net Weight:
1.8 kg
Line Current:
1.7 A 97 % 208 V, with external line choke 2 mH || 1.8 A 108 % 400 V, with external line choke 2 mH || 1.6 A 116 % 480 V, with external line choke 2 mH || 1.8 A 132 % 208 V, without line choke || 1.4 A 191 % 400 V, without line choke || 1.2 A 201 % 4
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Connector Type:
RJ45 (labelled CN7) Modbus
Emc Filter:
integrated
Rohs Exemption Information:
Yes
Continuous Power:
400 W 208 V || 800 W 400 V || 800 W 480 V
Discrete Output Type:
logic DO)24 V DC
Number Of Addresses:
1-247 Modbus
Sustainable Offer Status:
Green Premium product
Output Voltage:
<= power supply voltage
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Ip Degree Of Protection:
IP20 EN/IEC 60529
Discrete Output Number:
3
Mercury Free:
Yes
Vibration Resistance:
1 gn 13-150 Hz)EN/IEC 60068-2-6
Discrete Input Type:
capture CAP
Discrete Output Voltage:
<= 30 V DC
Nominal Power:
0.35 kW 208 V 8 kHz || 0.4 kW 400 V 8 kHz || 0.4 kW 480 V 8 kHz
Circularity Profile:
ENVEOLI110605EN
Range Of Product:
Lexium 32
Product Or Component Type:
motion servo drive
Operating Position:
vertical +/- 10 degree
Discrete Output Logic:
positive or negative DO)EN/IEC 61131-2
Switching Frequency:
8 kHz
Electrical Connection:
terminal 3 mm², AWG 12 CN8)
Overvoltage Category:
III
$1,676.96

Description

This product is part of the Lexium 32 range, an offer of servo drives from 0.15kW to 7kW. The motion servo drive features integrated EMC filter. It offers 2 capture discrete inputs and 3 discrete outputs. It is a motion servo drive with a rated supply voltage of 200V to 240V, 380V to 480V, a continuous output current of 1.5A at 8kHz and a continuous power of 400W at 400V. It is furnished with RJ45 connector (labelled CN7) for Modbus. It offers electrical isolation between power and control. It provides Modbus and SERCOS III communication interface. It is an IP20 rated product. Its dimensions are 68mm (width) x 237mm (depth) x 270mm (height). It weighs 1.8kg. This product is certified by CSA. It meets EN/IEC 61800-3 standards. This product is compatible with servo motor BSH (70mm, 1 motor stack). Lexium 32 is a servo drive range provides drive and motor combination that has exactly the right power, performance and functionality. The Lexium 32 range of servo drives includes four servo drive models with power ratings from 0.15kW to 11kW and the servo motor ranges BMH and BSH series.
View AllClose