Schneider Electric RM17TE00 Ph Rot:Failure 208-480Vac Asymm Uv/Ov

(No reviews yet) Write a Review
SKU:
RM17TE00
UPC:
3389119405058
Condition:
New
Mercury Free:
Yes
Standards:
IEC 60255-1
Contacts Type And Composition:
1 C/O
Electrical Durability:
100000 cycles
Maximum Measuring Cycle:
150 ms measurement cycle as true rms value
Overvoltage Category:
III IEC 60664-1
Ambient Air Temperature For Operation:
-20-50 °C
Insulation Resistance:
> 500 MOhm 500 V DC IEC 60255-5 || > 500 MOhm 500 V DC IEC 60664-1
Measurement Range:
208...480 V voltage AC
Reset Time:
1500 ms time delay
[Ui] Rated Insulation Voltage:
400 V IEC 60664-1
Width:
17.5 mm
Control Circuit Frequency:
50...60 Hz +/- 10 %
Threshold Adjustment Voltage:
2...20 % of Un selected || -2...-17 % in the range 220 V AC || +2...+10 % in the range 480 V AC || -2...-12 % in the range 208 V AC
Measurement Voltage Limits:
183-528 V AC
[Uc] Control Circuit Voltage:
208...480 V
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Dielectric Test Voltage:
2 kV AC 50 Hz, 1 min IEC 60255-5 || 2 kV AC 50 Hz, 1 min IEC 60664-1
Voltage Range:
208...480 V phase to phase
Ambient Air Temperature For Storage:
-40-70 °C
Minimum Switching Current:
10 mA 5 V DC
Warranty:
18 months
Safety Reliability Data:
MTTFd = 502.2 years || B10d = 470000
Utilisation Category:
AC-12 IEC 60947-5-1 || AC-13 IEC 60947-5-1 || AC-14 IEC 60947-5-1 || AC-15 IEC 60947-5-1 || DC-12 IEC 60947-5-1 || DC-13 IEC 60947-5-1
Response Time:
< 200 ms (in the event of a fault)
Supply Voltage Limits:
183-528 V AC
Operating Position:
any position without derating
Sustainable Offer Status:
Green Premium product
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Marking:
CE
Vibration Resistance:
0.35 mm 5-57.6 Hz)IEC 60068-2-6 || 1 gn 57.6-150 Hz)IEC 60255-21-1
Run-Up Delay At Power-Up:
650 ms
Time Delay Type:
adjustable 0.1...10 s, +/- 10 % of the full scale value
Product Or Component Type:
3-phase control relay
Range Of Product:
Harmony Control Relays
Adjustment Of Asymmetry Threshold:
5...15 % of Un selected
Product Specific Application:
for 3-phase supply
Ip Degree Of Protection:
IP20 IEC 60529 terminals) || IP30 IEC 60529 casing)
Product Certifications:
GOST || C-tick || CSA || UL || GL
Maximum Switching Voltage:
250 V AC || 250 V DC
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Control Type:
without test button
Hysteresis:
2-2 %
Phase Failure Sensitivity:
0.7 Un
Operating Rate:
<= 360 operations/hour full load
Measurement Error:
< 0.05 %/°C with temperature variation || < 1 % over the whole range with voltage variation
Relay Monitored Parameters:
undervoltage and overvoltage in window mode || asymmetry || phase sequence || phase failure detection
Control Circuit Voltage Limits:
12 % + 10 % Un
[Us] Rated Supply Voltage:
self-powered
Electromagnetic Compatibility:
emission standard for industrial environments conforming to IEC 61000-6-4 || emission standard for residential, commercial and light-industrial environments conforming to IEC 61000-6-3 || immunity for industrial environments conforming to IEC 61000-6
Repeat Accuracy:
0.5 % input and measurement circuit || 3 % time delay
China Rohs Regulation:
X
Non-Dissipating Shock Wave:
4 kV IEC 60255-5 || 4 kV IEC 60664-1 || 4 kV IEC 61000-4-5
Maximum Switching Current:
5 A AC || 5 A DC
Power Consumption In Va:
0-22 VA 400 V AC 50 Hz
Rohs Exemption Information:
Yes
Supply Frequency:
50/60 Hz +/- 10 %
Connections - Terminals:
screw terminals, 1 x 0.5...1 x 4 mm² AWG 20...AWG 11) solid without cable end || screw terminals, 2 x 0.5...2 x 2.5 mm² AWG 20...AWG 14) solid without cable end || screw terminals, 1 x 0.2...1 x 2.5 mm² AWG 24...AWG 12) flexible with cable end || scr
Relative Humidity:
95-95 % 55-55 °C IEC 60068-2-30
Mechanical Durability:
30000000 cycles
Shock Resistance:
15 gn 11 ms IEC 60255-21-1
Net Weight:
0.13 kg
Directives:
89/336/EEC - electromagnetic compatibility || 73/23/EEC - low voltage directive
Relay Name:
RM17TE
Mounting Support:
35 mm symmetrical DIN rail conforming to IEC 60715
Circularity Profile:
ENVEOLI1504008EN
Output Contacts:
1 C/O
Housing Material:
self-extinguishing plastic
Local Signalling:
for power ON LED (green) || for relay ON LED (yellow)
Environmental Disclosure:
ENVPEP1504008EN
Pollution Degree:
3 IEC 60664-1
Nominal Output Current:
0.208333333333333
Relay Type:
multifunction control relay
Tightening Torque:
0.6-1 N.m IEC 60947-1
Switching Capacity In Va:
1250 VA
  • Schneider Electric RM17TE00 Ph Rot:Failure 208-480Vac Asymm Uv/Ov
  • Schneider Electric RM17TE00 Ph Rot:Failure 208-480Vac Asymm Uv/Ov
  • Schneider Electric RM17TE00 Ph Rot:Failure 208-480Vac Asymm Uv/Ov
$217.00

Description

Zelio Control Monitoring and Control Relays (RM17, RM22, RM35) monitor and detect abnormal operating conditions concerning phase ,current, voltage, frequency, speed, or temperature. The relays inform users of abnormal conditions and allow them to initiate the necessary corrective actions before serious and costly breakdown can occur. Zelio phase control relays detect all possible faults occurring in the phases. Zelio voltage and current control relays ensure your equipment is powered with proper values. Zelio frequency control relay monitors frequency variation from your power generation line. The product monitors its own power supply, when the power supply is abnormal, the output relay de-energizes. Zelio pump control relay controls and protects your pump from dry running or overloading. Zelio speed control relay picks up the improper rhythm of your process. Zelio temperature control relay for lift application is a dedicated to elevator temperature monitoring (EN81). Zelio temperature control relays are dedicated to temperature regulation (heating, cooling or heating/cooling of processes). These Zelio relays are available in 17.5 mm, 22.5 mm or 35 mm wide housings and are DIN rail mounted. Applications for these Zelio relays include hoisting, construction cranes, harbor cranes, packaging, construction elevators, passenger elevators, escalators, textile, water and waste water. 0 0 0 0 0 0 0
View AllClose