Schneider Electric RPM12BD 15A Power Relay Led 1C/O 24Vdc Pack of 10
Schneider Electric
$64.70
(No reviews yet)
Write a Review
Write a Review
Schneider Electric
Schneider Electric RPM12BD 15A Power Relay Led 1C/O 24Vdc Pack of 10
This Harmony RPM power plug-in relay has a coil control voltage of 24V DC and has 1 changeover contact SPDT (single pole double throw) with a rating of 15A. It has large choice of number of contacts for high rated current use. It also offers LED indicator to alert on the current status of the relay. It helps to reduce the size of enclosures and increase machine reliability, you can mount nearly everywhere. This RPM product is IP40. Workability for hard-wired logic automated systems to complement the functions of industrial programmable logic controllers (PLCs). Status display with LED, clearly signal both in the day and night. 0 0 0 0 0 0 0 0 0
- [Ithe] Conventional Enclosed Thermal Current:
- 15 A -40-55 °C
- Warranty:
- 18 months
- Device Presentation:
- complete product
- Rated Operational Voltage Limits:
- 19.2...26.4 V DC
- China Rohs Regulation:
- X
- Mechanical Durability:
- 10000000 cycles
- Circularity Profile:
- N/A
- Device Short Name:
- RPM
- Contacts Type And Composition:
- 1 C/O
- Test Levels:
- level A group mounting
- Operating Rate:
- <= 1200 cycles/hour under load || <= 18000 cycles/hour no-load
- Net Weight:
- 0.026 kg
- Sustainable Offer Status:
- Green Premium product
- Series Name:
- Power
- [Ui] Rated Insulation Voltage:
- 250 V IEC || 300 V CSA || 300 V UL
- Weee:
- The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
- Reach Free Of Svhc:
- Yes
- Vibration Resistance:
- 3 gn +/- 1 mm 10-150 Hz)5 cycles in operation || 5 gn +/- 1 mm 10-150 Hz)5 cycles not operating
- Drop-Out Voltage Threshold:
- >= 0.1 Uc DC
- Operating Position:
- any position
- Shape Of Pin:
- flat
- Environmental Disclosure:
- ENVPEP1406038EN
- [Uc] Control Circuit Voltage:
- 24 V DC
- Maximum Switching Voltage:
- 250 V IEC
- Ip Degree Of Protection:
- IP40 conforming to IEC 60529
- Product Certifications:
- CSA || EAC || UL
- Dielectric Strength:
- 1500 V AC between contacts with micro disconnection || 2000 V AC between coil and contact with reinforced
- Minimum Switching Capacity:
- 170 mW 10 mA, 17 V
- Rohs Exemption Information:
- Yes
- Operating Time:
- 20 ms at nominal voltage
- Reset Time:
- 20 ms at nominal voltage
- Utilisation Coefficient:
- 0.2
- Range Of Product:
- Harmony Electromechanical Relays
- Status Led:
- with
- Product Or Component Type:
- plug-in relay
- Ambient Air Temperature For Storage:
- -40-85 °C
- Eu Rohs Directive:
- Pro-active compliance (Product out of EU RoHS legal scope)
- Load Current:
- 15 A 250 V AC || 15 A 28 V DC
- Reach Regulation:
- Free of Substances of Very High Concern above the threshold
- Electrical Durability:
- 100000 cycles resistive
- Average Resistance:
- 450 Ohm at 20 °C +/- 10 %
- Maximum Switching Capacity:
- 3750 VA || 420 W
- Standards:
- IEC 61810-1 || UL 508 || CSA C22.2 No 14
- [Ie] Rated Operational Current:
- 15 A 277 V AC) UL || 15 A 28 V DC) UL || 15 A 250 V AC) NO IEC || 15 A 28 V DC) NO IEC || 7.5 A 250 V AC) NC IEC || 7.5 A 28 V DC) NC IEC
- California Proposition 65:
- WARNING: This product can expose you to chemicals including: Nickel compounds, which is known to the State of California to cause cancer, and Di-isodecyl phthalate (DIDP), which is known to the State of California to cause birth defects or other repr
- Average Coil Consumption:
- 1.1 W
- Ambient Air Temperature For Operation:
- -40-55 °C
- Safety Reliability Data:
- B10d = 100000
- Pollution Degree:
- 3
- Control Type:
- lockable test button
- Shock Resistance:
- 15 gnin operation || 30 gnnot operating
- Contacts Material:
- AgNi
- Protection Category:
- RT I
- [Uimp] Rated Impulse Withstand Voltage:
- 4 kV 1.2/50 µs
- Catalog:
- View
- Datasheet:
- View
