Schneider Electric RPM42BD 15A Power Relay Led 4C/O 24Vdc Pack of 10
Schneider Electric
$133.00
$1200 Minimum Order for Non-stock Items or $60 Addl Schneider Handling Fee Applies
This Harmony RPM power plug-in relay has a coil control voltage of 24V DC and has 4 changeover contacts 4PDT (quadruple pole double throw) with a rating of 15A. It has large choice of number of contacts for high rated current use. It also offers LED indicator to alert on the current status of the relay. It helps to reduce the size of enclosures and increase machine reliability, you can mount nearly everywhere. This RPM product is IP40. Workability for hard-wired logic automated systems to complement the functions of industrial programmable logic controllers (PLCs). Status display with LED, clearly signal both in the day and night. 0 0 0 0 0 0 0 0 0
- Device Presentation:
- complete product
- Electrical Durability:
- 100000 cycles resistive
- Contacts Type And Composition:
- 4 C/O
- [Ie] Rated Operational Current:
- 15 A 277 V AC) UL || 15 A 28 V DC) UL || 15 A 250 V AC) NO IEC || 15 A 28 V DC) NO IEC || 7.5 A 250 V AC) NC IEC || 7.5 A 28 V DC) NC IEC
- Weee:
- The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
- Range Of Product:
- Harmony Electromechanical Relays
- Operating Time:
- 20 ms at nominal voltage
- Utilisation Coefficient:
- 0.2
- Reach Free Of Svhc:
- Yes
- Mechanical Durability:
- 10000000 cycles
- Pollution Degree:
- 3
- Average Coil Consumption:
- 1.6 W
- Eu Rohs Directive:
- Pro-active compliance (Product out of EU RoHS legal scope)
- Circularity Profile:
- N/A
- Warranty:
- 18 months
- Minimum Switching Capacity:
- 170 mW 10 mA, 17 V
- Drop-Out Voltage Threshold:
- >= 0.1 Uc DC
- Operating Position:
- any position
- Sustainable Offer Status:
- Green Premium product
- Reset Time:
- 20 ms at nominal voltage
- Test Levels:
- level A group mounting
- Series Name:
- Power
- Ambient Air Temperature For Storage:
- -40-85 °C
- Rated Operational Voltage Limits:
- 19.2...26.4 V DC
- Device Short Name:
- RPM
- Net Weight:
- 0.071 kg
- Vibration Resistance:
- 3 gn +/- 1 mm 10-150 Hz)5 cycles in operation || 5 gn +/- 1 mm 10-150 Hz)5 cycles not operating
- Protection Category:
- RT I
- Reach Regulation:
- Free of Substances of Very High Concern above the threshold
- Environmental Disclosure:
- ENVPEP1406038EN
- [Ithe] Conventional Enclosed Thermal Current:
- 15 A -40-55 °C
- Control Type:
- lockable test button
- [Uc] Control Circuit Voltage:
- 24 V DC
- Rohs Exemption Information:
- Yes
- Ip Degree Of Protection:
- IP40 conforming to IEC 60529
- Maximum Switching Voltage:
- 250 V IEC
- [Uimp] Rated Impulse Withstand Voltage:
- 4 kV 1.2/50 µs
- Load Current:
- 15 A 250 V AC || 15 A 28 V DC
- Maximum Switching Capacity:
- 3750 VA || 420 W
- California Proposition 65:
- WARNING: This product can expose you to chemicals including: Nickel compounds, which is known to the State of California to cause cancer, and Di-isodecyl phthalate (DIDP), which is known to the State of California to cause birth defects or other repr
- Product Or Component Type:
- plug-in relay
- Safety Reliability Data:
- B10d = 100000
- Ambient Air Temperature For Operation:
- -40-55 °C
- Product Certifications:
- EAC || CSA || UL
- Shape Of Pin:
- flat
- Contacts Material:
- AgNi
- Operating Rate:
- <= 1200 cycles/hour under load || <= 18000 cycles/hour no-load
- Average Resistance:
- 303 Ohm at 20 °C +/- 10 %
- [Ui] Rated Insulation Voltage:
- 250 V IEC || 300 V CSA || 300 V UL
- Shock Resistance:
- 15 gnin operation || 30 gnnot operating
- China Rohs Regulation:
- X
- Status Led:
- with
- Standards:
- IEC 61810-1 || CSA C22.2 No 14 || UL 508
- Dielectric Strength:
- 1500 V AC between contacts with micro disconnection || 2000 V AC between coil and contact with reinforced || 2000 V AC between poles with basic
- Catalog:
- View
- Datasheet:
- View
