Schneider Electric RXM4GB2U7 Miniature Relay Led 4C/O Low Sw 240Vac Pack of 10

(No reviews yet) Write a Review
SKU:
RXM4GB2U7
UPC:
3.38912E+12
Condition:
New
Maximum Switching Capacity:
750 VA/84 W
Series Name:
Miniature
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Product Certifications:
UL || Lloyd's || CE || CSA || GOST || IECEE CB Scheme
[Uc] Control Circuit Voltage:
240 V AC 50/60 Hz
[Ie] Rated Operational Current:
2 A 28 V DC) NO IEC || 2 A 250 V AC) NO IEC || 1 A 28 V DC) NC IEC || 1 A 250 V AC) NC IEC || 3 A 28 V DC) UL || 3 A 277 V AC) UL
Average Consumption:
1.2 VA 60 Hz
Rated Operational Voltage Limits:
192...264 V AC
Mechanical Durability:
10000000 cycles
Status Led:
with
Minimum Switching Capacity:
15 mW 3 mA, 5 V
Average Resistance:
17720 Ohm 20 °C +/- 15 %
Average Coil Consumption In Va:
1.2-1.2 60 Hz
Environmental Disclosure:
ENVPEP2106019EN
Device Short Name:
RXM
Ambient Air Temperature For Storage:
-40-85 °C
Device Presentation:
complete product
Operating Time:
20 ms
Electrical Durability:
100000 cycles resistive depending on mounting position and working environment
Rohs Exemption Information:
Yes
Test Levels:
level A group mounting
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Net Weight:
0.037 kg
Contacts Material:
gold plated bifurcated silver
Shock Resistance:
10 gnin operation || 30 gnnot operating
Reset Time:
20 ms
China Rohs Regulation:
X
[Ithe] Conventional Enclosed Thermal Current:
3 A -40-55 °C
Circularity Profile:
ENVEOLI2106019EN
Utilisation Coefficient:
0.2
Sustainable Offer Status:
Green Premium product
Protection Category:
RT I
Dielectric Strength:
1300 V AC between contacts with micro disconnection || 2000 V AC between coil and contact || 2000 V AC between poles
Standards:
IEC 61810-1 || CSA C22.2 No 14 || UL 508
[Uimp] Rated Impulse Withstand Voltage:
2.5 kV 1.2/50 µs
Shape Of Pin:
flat
Contacts Type And Composition:
4 C/O
Ip Degree Of Protection:
IP40 conforming to IEC 60529
Ambient Air Temperature For Operation:
-40-55 °C
Reach Regulation:
Free of Substances of Very High Concern above the threshold
Drop-Out Voltage Threshold:
>= 0.15 Uc
Control Type:
lockable test button
[Ui] Rated Insulation Voltage:
250 V IEC || 300 V CSA || 300 V UL
Reach Free Of Svhc:
Yes
Range Of Product:
Harmony Electromechanical Relays
Operating Rate:
<= 1200 cycles/hour under load || <= 18000 cycles/hour no-load
Operating Position:
any position
Vibration Resistance:
3 gn +/- 1 mm 10-150 Hz)5 cycles in operation || 5 gn +/- 1 mm 10-150 Hz)5 cycles not operating
Warranty:
18 months
Load Current:
3 A 250 V AC || 3 A 28 V DC
Maximum Switching Voltage:
250 V IEC
Pollution Degree:
2
Product Or Component Type:
plug-in relay
California Proposition 65:
WARNING: This product can expose you to chemicals including: Nickel compounds, which is known to the State of California to cause cancer, and Di-isodecyl phthalate (DIDP), which is known to the State of California to cause birth defects or other repr
  • Schneider Electric RXM4GB2U7 Miniature Relay Led 4C/O Low Sw 240Vac Pack of 10
  • Schneider Electric RXM4GB2U7 Miniature Relay Led 4C/O Low Sw 240Vac Pack of 10
$83.00

Description

RXM miniature relays are part of Harmony Electromechanical Relays. This is a plug in relay to be mounted on a RXZE socket. It is a 4 C/O relay (gold plated contact) with current rating of 3A, control circuit voltage of 240 V AC 50/60 Hz. It also offers one-step loackable test button and mechanical indicator for contact status. The testbutton is activated momentarily by pushing the red pushbutton on the front and locked by flipping up the green part. The mechanical indicator is next to the testbutton, where an orange flag indicates the relay contact status. A green LED on the front will illuminate when the relay is on. Status display with LED: clearly signal both in the day and night. Its design is fit for industrial machines, packaging, textile, HVAC, automation control panels, low/medium voltage switchgear, motor control, PLC Interfaces, power supplies, building equipment, especially those requiring low level contacts. It is a green premium product and conforms to international standard and certifications like IEC, CE, UL, CSA, EAC, Lloyd's, RoHS and REACH. RXM Relay should be used with a RXZE socket (screw clamp, screw connector, push-in terminal). To protect against vibrations, plastic/metal clamp can be added to the socket. Protection modules and marking legend are also available. It is sold in lots of 10 and reference includes relay only. The RXM plug-in relays are a series of industrial plug-in relays designed for both simple and complex automation systems and available with 2 CO (12A), 3 CO (10A), 4 CO (6A) contacts, 4 CO (3A) low level contacts.
View AllClose