Schneider Electric SD315ON10B400 Sd315On10B400
Schneider Electric
$565.91
$1200 Minimum Order for Non-stock Items or $60 Addl Schneider Handling Fee Applies
motion control stepper motor drive - SD315 - pulse direction with oscillator
- Input Voltage:
- < 30 V
- Height:
- 117 mm
- Electromagnetic Compatibility:
- electrostatic discharge level 3 IEC 61000-4-2 || immunity to electrical transients level 4 IEC 61000-4-4 || immunity to radiated radio-electrical interference level 3 IEC 61000-4-3 || voltage/current impulse level 3 IEC 61000-4-5
- Local Signalling:
- 1 LED - ERR || 1 LED - RUN
- Net Weight:
- 0.25 kg
- Analogue Input Type:
- voltage 0...10 V 10 bits 50 kOhm
- Maximum Motor Phase Current:
- 0.416666666666667
- Communication Interface:
- pulse/direction, Integrated
- Phase:
- single phase
- Ambient Air Temperature For Operation:
- 0-50 °C
- Marking:
- CE
- Maximum Switching Voltage:
- 30 V DC readiness signal output) || 30 V pulse/direction output signal) || 10 V DC output signal)
- [Us] Rated Supply Voltage:
- 24...48 V - 15...10 %
- Physical Interface:
- RS422 - pulse/direction interface with oscillator
- Product Or Component Type:
- motion stepper drive
- California Proposition 65:
- WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
- Standards:
- IEC 61800-3 environment 1 || IEC 61800-3 || IEC 50178 || IEC 61800-5-1 || EN/IEC 61800-3 environment 2
- Environmental Disclosure:
- ENVPEP111115EN
- Width:
- 74.5 mm
- Type Of Cooling:
- natural convection
- Relative Humidity:
- 5-85 % without condensation
- Range Of Product:
- Lexium SD3
- Sustainable Offer Status:
- Green Premium product
- Operating Altitude:
- <= 3280.84 ft (1000 m) without derating || > 3280.84...< 6561.68 ft (> 1000...< 2000 m) without derating maximum ambient temperature 40°C, lateral distance of > 20 mm)
- Product Certifications:
- UL || cUL
- Maximum Input Frequency:
- 200 kHz 24 V optocoupler input signals || 200 kHz 5 V optocoupler input signals
- Reach Regulation:
- Reference contains Substances of Very High Concern above the threshold
- Supply Voltage Type:
- DC
- Pollution Degree:
- level 2
- Pvc Free:
- Yes
- Voltage State 1 Guaranteed:
- 15...30 V 24 V optocoupler input signals || 2.5...5.25 V 5 V optocoupler input signals
- Vibration Resistance:
- 1 gn 13-150 Hz)IEC 60068-2-6 || 1.5 mm 3-13 Hz)IEC 60068-2-6
- Maximum Voltage Drop:
- <1 V 50 mA load readiness signal output || <0.5 V pulse/direction output signal
- Voltage State 0 Guaranteed:
- <= 5 V 24 V optocoupler input signals || <= 0.4 V 5 V optocoupler input signals
- Associated Fuse Rating:
- 0.416666666666667
- China Rohs Regulation:
- X
- Format Of The Drive:
- block
- Input Current:
- 25 mA 5 V optocoupler input signals || 7 mA 24 V optocoupler input signals
- Rohs Exemption Information:
- Yes
- Mercury Free:
- Yes
- Ip Degree Of Protection:
- IP20
- Resistance:
- 10 kOhm external potentiometer)
- Device Short Name:
- SD315
- Ambient Air Temperature For Storage:
- -25-70 °C
- Depth:
- 23.5 mm
- Shock Resistance:
- 15 gn 11 ms IEC 60068-2-27
- Maximum Leakage Current:
- 30 mA
- Maximum Switching Current:
- 200 mA readiness signal output) || 50 mA pulse/direction output signal) || 20 mA output signal)
- Warranty:
- 18 months
- Eu Rohs Directive:
- Pro-active compliance (Product out of EU RoHS legal scope)
- Supply Voltage Limits:
- 19-60 V
- Residual Ripple:
- < 5 % 24 V control voltage)
- Circularity Profile:
- ENVEOLI111103EN
- Current Consumption:
- <= 7.5 mA
- Power Losses:
- <= 7 W
- Overvoltage Category:
- III
- Catalog:
- View
- Datasheet:
- View