Schneider Electric

Schneider Electric SH30703P12A2000 servo motor SH3 070 2,94Nm,key,multi,nobrake,90°conn.IP54/IP65,8k RPM

(No reviews yet) Write a Review
SKU:
SH30703P12A2000
MPN:
SH30703P12A2000
Condition:
New
Shaft Diameter:
14 mm
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Electrical Connection:
rotatable right angled connector
Nominal Speed:
1500 rpm 115 V single phase || 3000 rpm 230 V single phase || 6000 rpm 400 V three phase || 7200 rpm 480 V three phase
Continuous Stall Current:
4.1 A
Environmental Disclosure:
ENVPEP111049EN
Pvc Free:
Yes
Holding Brake:
without
[Us] Rated Supply Voltage:
115...480 V
Shaft End:
parallel key
Country of Origin:
United States
Key Width:
5 mm
Encoder Type:
absolute multiturn SinCos Hiperface
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Device Short Name:
SH3.....P
Mounting Holes Diameter:
5.5 mm
Mercury Free:
Yes
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Continuous Power:
1330 W
Maximum Mechanical Speed:
8000 rpm
Speed Feedback Resolution:
128 periods
Motor Flange Size:
70 mm
Maximum Current Irms:
17 A
Sustainable Offer Status:
Green Premium product
Warranty:
18 months
Nominal Output Power:
460 W 115 V single phase || 880 W 230 V single phase || 1450 W 400 V three phase || 1550 W 480 V three phase
Peak Stall Torque:
11.3 N.m 115...480 V three phase
Back Emf Constant:
49 V/krpm 20°C
Shaft Length:
30 mm
Centring Collar Diameter:
60 mm
Weight:
3.6 kg
Product Or Component Type:
servo motor
Rohs Exemption Information:
Yes
Circularity Profile:
N/A
Circle Diameter Of The Mounting Holes:
82 mm
Mounting Support:
international standard flange
Stator Inductance:
20.3 mH
Rotor Inertia:
0.58 kg.cm²
Continuous Stall Torque:
2.94 N.m 115...480 V three phase
Number Of Mounting Holes:
4
Net Weight:
3.6 kg
Ip Degree Of Protection:
IP54 shaft bushing without shaft seal ring: conforming to EN/IEC 60034-5 || IP65 motor: conforming to EN/IEC 60034-5 || IP65 shaft bushing: conforming to EN/IEC 60034-5
China Rohs Regulation:
X
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Nominal Torque:
2.95 N.m 115 V single phase || 2.8 N.m 230 V single phase || 2.1 N.m 400 V three phase || 2.1 N.m 480 V three phase
Phase:
three phase
Centring Collar Depth:
2.5 mm
Stator Resistance:
2.7 Ohm
$1,744.75

Description

This product is part of the Lexium 52 & Motors range, an offer of servo motors for PacDrive 3. The 3-pole servo motor features maximum mechanical speed of 8000RPM and parallel key shaft end without holding brake. It is an equipped with an absolute multi-turn SinCos Hiperface® encoder with 128 periods speed feedback resolution. It is a servo motor with a rated supply voltage of 115V to 480V, a continuous stall current of 4.1A and a continuous power of 1330W. The shaft dimensions are 14mm (diameter) x 30mm (length). It is furnished with rotatable right angled connectors for electrical connection. It is an IP54 and IP65 rated product. The length of this product is 220mm and the centering collar dimensions are 2.5mm (depth) x 60mm (diameter) with 82mm mounting hole. It weighs 3.6kg. This range is compatible with PacDrive 3 for motion centric machines. It supports 70mm international standard flange mount with a natural convection cooling system. Lexium 52 provides an ideal counterbalance to the Lexium 62 multi-axis servo system, making the PacDrive system one of the most flexible motion control solutions. Lexium Stand alone servo drives from 0.4kW and 7kW for PacDrive based automation solutions.
View AllClose

Related Products

Related Products