Schneider Electric SH31001P11A1100 Sh3 Motor 100.1 Key Sgl Str Ip65
SKU:
SH31001P11A1100
UPC:
3606481972248
MPN:
Condition:
New
Motor Flange Size:
100 mm
Stator Inductance:
27.15 mH
Encoder Type:
absolute single turn SinCos Hiperface
Nominal Output Power:
410 W 115 V single phase || 790 W 230 V single phase || 1410 W 400 V three phase || 1630 W 480 V three phase
Net Weight:
4.3 kg
Maximum Axial Force Fa:
160 N
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
China Rohs Regulation:
X
Torque Constant:
0.84 N.m/A 120 °C
Sustainable Offer Status:
Green Premium product
Type Of Cooling:
natural convection
Circularity Profile:
N/A
Phase:
three phase
Continuous Stall Current:
3.5 A
Number Of Motor Poles:
4
Mounting Support:
international standard flange
Shaft End:
parallel key
Environmental Disclosure:
ENVPEP111049EN
Back Emf Constant:
60 V/krpm 20 °C
Maximum Mechanical Speed:
6000 rpm
Circle Diameter Of The Mounting Holes:
115 mm
Continuous Stall Torque:
2.94 N.m 115...480 V three phase
Mounting Holes Diameter:
9.0 mm
Key Width:
6 mm
[Us] Rated Supply Voltage:
115...480 V
Centring Collar Diameter:
95 mm
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Holding Brake:
without
Centring Collar Depth:
3.5 mm
Ip Degree Of Protection:
motor IP65 EN/IEC 60034-5 || shaft bushing IP65 EN/IEC 60034-5
Rohs Exemption Information:
Yes
Range Compatibility:
PacDrive 3
Speed Feedback Resolution:
128 periods
Continuous Power:
1190 W
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Warranty:
18 months
Nominal Speed:
1250 rpm 115 V single phase || 2500 rpm 230 V single phase || 5000 rpm 400 V three phase || 6000 rpm 480 V three phase
Number Of Mounting Holes:
4
Product Or Component Type:
servo motor
Mercury Free:
Yes
Pvc Free:
Yes
Stator Resistance:
3.8 Ohm
Maximum Radial Force Fr:
900 N 1000 rpm || 720 N 2000 rpm || 630 N 3000 rpm || 570 N 4000 rpm || 530 N 5000 rpm
Rotor Inertia:
1.4 kg.cm²
Shaft Length:
40 mm
Shaft Diameter:
19 mm
Length:
168.5 mm
Maximum Current Irms:
0
Electrical Connection:
straight connector
Peak Stall Torque:
9.6 N.m 115...480 V three phase
Device Short Name:
SH3.....P
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Nominal Torque:
2.91 N.m 115 V single phase || 2.64 N.m 230 V single phase || 2.27 N.m 400 V three phase || 2.27 N.m 480 V three phase
