Schneider Electric SH31002P11F2100 Sh3 Motor 100.2 Key Sgl Brk Ang Ip65
SKU:
SH31002P11F2100
UPC:
3.60649E+12
MPN:
Condition:
New
Nominal Torque:
5.5 N.m 115 V single phase || 5.2 N.m 230 V single phase || 4.6 N.m 400 V three phase || 4.4 N.m 480 V three phase
China Rohs Regulation:
X
Shaft End:
parallel key
Peak Stall Torque:
18.3 N.m 115...480 V three phase
Environmental Disclosure:
ENVPEP111049EN
Sustainable Offer Status:
Green Premium product
Encoder Type:
absolute single turn SinCos Hiperface
Nominal Speed:
1000 rpm 115 V single phase || 2000 rpm 230 V single phase || 4000 rpm 400 V three phase || 4800 rpm 480 V three phase
Mounting Support:
international standard flange
Continuous Power:
1900 W
Pvc Free:
Yes
Holding Brake:
with
Continuous Stall Current:
4.8 A
Length:
234.5 mm
Motor Flange Size:
100 mm
Maximum Radial Force Fr:
990 N 1000 rpm || 790 N 2000 rpm || 690 N 3000 rpm || 620 N 4000 rpm
Mercury Free:
Yes
Ip Degree Of Protection:
motor IP65 IEC 60034-5 || shaft bushing IP65 IEC 60034-5
Mounting Holes Diameter:
9.0 mm
Rohs Exemption Information:
Yes
Warranty:
18 months
Number Of Motor Poles:
4
Centring Collar Diameter:
95 mm
Nominal Output Power:
580 W 115 V single phase || 1090 W 230 V single phase || 1930 W 400 V three phase || 2210 W 480 V three phase
Rotor Inertia:
2.928 kg.cm²
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Stator Inductance:
19.5 mH
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Stator Resistance:
2.4 Ohm
Key Width:
6 mm
Shaft Diameter:
19 mm
Continuous Stall Torque:
5.8 N.m 115...480 V three phase
Phase:
three phase
Circle Diameter Of The Mounting Holes:
115 mm
Holding Torque:
9 N.m
Maximum Current Irms:
17.1 A
Type Of Cooling:
natural convection
Back Emf Constant:
77 V/krpm 20 °C
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Device Short Name:
SH3.....P
Circularity Profile:
N/A
Electrical Connection:
rotatable right angled connector
Maximum Axial Force Fa:
160 N
Shaft Length:
40 mm
Centring Collar Depth:
3.5 mm
Range Compatibility:
PacDrive 3
Speed Feedback Resolution:
128 periods
Number Of Mounting Holes:
4
Net Weight:
6.3 kg
Torque Constant:
1.21 N.m/A 120 °C
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
This product is part of the Lexium 52 & Motors range, an offer of servo motors for PacDrive 3. The 4-pole servo motor features maximum mechanical speed of 6000RPM and smooth shaft end with...
Lexium SH3 Servo motors are designed to fit Lexium 62 and Lexium 52 servo drives, part of PacDrive 3, an automation solution for motion centric machines. The servo motor features maximum mechanical...