Schneider Electric SH31401P02F2100 servo motor SH3 140 11,1Nm,nokey,multi,brake,90°conn.IP65/IP65,4k RPM
SKU:
SH31401P02F2100
UPC:
MPN:
SH31401P02F2100
Condition:
New
Circularity Profile:
N/A
Type Of Cooling:
natural convection
Range Compatibility:
PacDrive 3
Phase:
three phase
Back Emf Constant:
100 V/krpm 20°C
Stator Inductance:
23.72 mH
Encoder Type:
absolute multiturn SinCos Hiperface
Holding Brake:
with
[Us] Rated Supply Voltage:
115...480 V
Holding Torque:
23 N.m
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Country of Origin:
United States
Warranty:
18 months
Peak Stall Torque:
27 N.m 115...480 V three phase
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Circle Diameter Of The Mounting Holes:
165 mm
Maximum Current Irms:
20.8 A
Centring Collar Diameter:
130 mm
Ip Degree Of Protection:
IP65 motor: conforming to EN/IEC 60034-5 || IP65 shaft bushing: conforming to EN/IEC 60034-5
Environmental Disclosure:
ENVPEP111049EN
Nominal Output Power:
860 W 115 V single phase || 1670 W 230 V single phase || 2890 W 400 V three phase || 3170 W 480 V three phase
Number Of Motor Poles:
5
Mercury Free:
Yes
Continuous Power:
2900 W
Centring Collar Depth:
3.5 mm
Speed Feedback Resolution:
128 periods
Mounting Support:
international standard flange
Electrical Connection:
rotatable right angled connector
Number Of Mounting Holes:
4
Shaft End:
smooth shaft
Rotor Inertia:
9.21 kg.cm²
Pvc Free:
Yes
Motor Flange Size:
140 mm
Maximum Mechanical Speed:
4000 rpm
Continuous Stall Torque:
11.1 N.m 115...480 V three phase
China Rohs Regulation:
X
Torque Constant:
1.43 N.m/A 120°C
Mounting Holes Diameter:
11 mm
Continuous Stall Current:
7.8 A
Length:
255.5 mm
Product Or Component Type:
servo motor
Maximum Axial Force Fa:
300 N
Device Short Name:
SH3.....P
Rohs Exemption Information:
Yes
Nominal Torque:
10.95 N.m 115 V single phase || 10.6 N.m 230 V single phase || 9.2 N.m 400 V three phase || 8.4 N.m 480 V three phase
Weight:
13 kg
Shaft Diameter:
24 mm
Maximum Radial Force Fr:
1930 N 1000 rpm || 1530 N 2000 rpm || 1340 N 3000 rpm
