Schneider Electric SH31402P11F1000 Sh3 Motor 140.2 Key Sgl Brk Str Ip54
SKU:
SH31402P11F1000
UPC:
3606481972804
MPN:
Condition:
New
Device Short Name:
SH3.....P
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Circularity Profile:
N/A
Rohs Exemption Information:
Yes
Maximum Mechanical Speed:
4000 rpm
Range Compatibility:
PacDrive 3
Number Of Motor Poles:
5
Continuous Stall Current:
13.2 A
Electrical Connection:
straight connector
Stator Resistance:
0.6 Ohm
Number Of Mounting Holes:
4
Peak Stall Torque:
60.1 N.m 115...480 V three phase
Length:
310.5 mm
Centring Collar Depth:
3.5 mm
Type Of Cooling:
natural convection
Shaft Diameter:
24 mm
Motor Flange Size:
140 mm
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Ip Degree Of Protection:
shaft bushing without shaft seal ring IP54 EN/IEC 60034-5 || motor IP65 EN/IEC 60034-5 || shaft bushing IP65 EN/IEC 60034-5
Maximum Radial Force Fr:
2240 N 1000 rpm || 1780 N 2000 rpm || 1550 N 3000 rpm
Mounting Holes Diameter:
11 mm
Shaft End:
parallel key
Phase:
three phase
Continuous Stall Torque:
19.5 N.m 115...480 V three phase
Continuous Power:
3900 W
[Us] Rated Supply Voltage:
115...480 V
Nominal Speed:
750 rpm 115 V single phase || 1500 rpm 230 V single phase || 3000 rpm 400 V three phase || 3600 rpm 480 V three phase
Holding Brake:
with
Rotor Inertia:
14.48 kg.cm²
Stator Inductance:
11.225 mH
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Circle Diameter Of The Mounting Holes:
165 mm
Sustainable Offer Status:
Green Premium product
Holding Torque:
23 N.m
Pvc Free:
Yes
Key Width:
8 mm
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Shaft Length:
50 mm
Product Or Component Type:
servo motor
Net Weight:
17.7 kg
China Rohs Regulation:
X
Encoder Type:
absolute single turn SinCos Hiperface
Mercury Free:
Yes
Mounting Support:
international standard flange
Torque Constant:
1.47 N.m/A 120 °C
Centring Collar Diameter:
130 mm
Nominal Torque:
18.6 N.m 115 V single phase || 17.1 N.m 230 V single phase || 12.3 N.m 400 V three phase || 9.7 N.m 480 V three phase
Maximum Axial Force Fa:
300 N
Back Emf Constant:
101 V/krpm 20 °C
Nominal Output Power:
1460 W 115 V single phase || 2690 W 230 V single phase || 3860 W 400 V three phase || 3660 W 480 V three phase
This product is part of the Lexium 52 & Motors range, an offer of servo motors for PacDrive 3. The 5-pole servo motor features maximum mechanical speed of 4000RPM and parallel key shaft end...
