Schneider Electric

Schneider Electric SH31402P12F2200 servo motor SH3 140 19,5Nm,key,multi,brake,90°conn.IP65/IP67,4k RPM

(No reviews yet) Write a Review
SKU:
SH31402P12F2200
MPN:
SH31402P12F2200
Condition:
New
Shaft Diameter:
24 mm
Device Short Name:
SH3.....P
Product Or Component Type:
servo motor
Electrical Connection:
rotatable right angled connector
China Rohs Regulation:
X
Shaft Length:
50 mm
Circularity Profile:
N/A
Back Emf Constant:
101 V/krpm 20°C
Continuous Stall Current:
13.2 A
Maximum Radial Force Fr:
2240 N 1000 rpm || 1780 N 2000 rpm || 1550 N 3000 rpm
Continuous Power:
3900 W
Phase:
three phase
Type Of Cooling:
natural convection
Holding Brake:
with
Mounting Support:
international standard flange
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Mercury Free:
Yes
Shaft End:
parallel key
Rohs Exemption Information:
Yes
Sustainable Offer Status:
Green Premium product
Maximum Axial Force Fa:
300 N
Stator Resistance:
0.6 Ohm
Environmental Disclosure:
ENVPEP111049EN
Encoder Type:
absolute multiturn SinCos Hiperface
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Circle Diameter Of The Mounting Holes:
165 mm
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Weight:
17.7 kg
Mounting Holes Diameter:
11 mm
Key Width:
8 mm
Number Of Motor Poles:
5
Torque Constant:
1.47 N.m/A 120°C
Stator Inductance:
11.225 mH
Speed Feedback Resolution:
128 periods
Continuous Stall Torque:
19.5 N.m 115...480 V three phase
Pvc Free:
Yes
Ip Degree Of Protection:
IP65 motor: conforming to IEC 60034-5 || IP65 shaft bushing: conforming to IEC 60034-5 || IP67 housing: conforming to IEC 60034-5
Width:
8 mm
[Us] Rated Supply Voltage:
115...480 V
Nominal Speed:
750 rpm 115 V single phase || 1500 rpm 230 V single phase || 3000 rpm 400 V three phase || 3600 rpm 480 V three phase
Nominal Torque:
18.6 N.m 115 V single phase || 17.1 N.m 230 V single phase || 12.3 N.m 400 V three phase || 9.7 N.m 480 V three phase
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Rotor Inertia:
14.48 kg.cm²
Centring Collar Diameter:
130 mm
Motor Flange Size:
140 mm
Range Compatibility:
PacDrive 3
Number Of Mounting Holes:
4
Holding Torque:
23 N.m
Warranty:
18 months
Length:
310.5 mm
$3,425.05