Schneider Electric

Schneider Electric SH31404P01A2000 servo motor SH3 140 33,4Nm,nokey,single,nobrake,90°conn.IP54/IP65,4k RPM

SKU:

SH31404P01A2000

UPC:

MPN:

SH31404P01A2000

Condition:

New

Nominal Torque:

30.2 N.m 115 V single phase || 26.3 N.m 230 V single phase || 12.9 N.m 400 V three phase || 11.1 N.m 480 V three phase

Product Or Component Type:

servo motor

Shaft Diameter:

24 mm

Torque Constant:

1.57 N.m/A 120°C

Type Of Cooling:

natural convection

Warranty:

18 months

Weight:

26 kg

Number Of Motor Poles:

5

Mercury Free:

Yes

Nominal Speed:

750 rpm 115 V single phase || 1500 rpm 230 V single phase || 3000 rpm 400 V three phase || 3600 rpm 480 V three phase

Sustainable Offer Status:

Green Premium product

Maximum Mechanical Speed:

4000 rpm

Reach Regulation:

Reference contains Substances of Very High Concern above the threshold

Peak Stall Torque:

131.9 N.m 115...480 V three phase

Stator Resistance:

0.28 Ohm

Shaft End:

smooth shaft

Encoder Type:

absolute single turn SinCos Hiperface

Phase:

three phase

Stator Inductance:

5.945 mH

China Rohs Regulation:

X

Continuous Stall Torque:

33.4 N.m 115...480 V three phase

Device Short Name:

SH3.....P

Shaft Length:

50 mm

Centring Collar Diameter:

130 mm

California Proposition 65:

WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Net Weight:

26 kg

Country of Origin:

United States

Pvc Free:

Yes

[Us] Rated Supply Voltage:

115...480 V

Centring Collar Depth:

3.5 mm

Circle Diameter Of The Mounting Holes:

165 mm

Rotor Inertia:

23.7 kg.cm²

Maximum Radial Force Fr:

2660 N 1000 rpm || 2110 N 2000 rpm || 1840 N 3000 rpm

Rohs Exemption Information:

Yes

Nominal Output Power:

2370 W 115 V single phase || 4130 W 230 V single phase || 4040 W 400 V three phase || 4190 W 480 V three phase

Eu Rohs Directive:

Pro-active compliance (Product out of EU RoHS legal scope)

Holding Brake:

without

Mounting Holes Diameter:

11 mm

Number Of Mounting Holes:

4

Continuous Power:

4040 W

Continuous Stall Current:

21.3 A

Back Emf Constant:

104 V/krpm 20°C

Electrical Connection:

rotatable right angled connector

Weee:

The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.

Mounting Support:

international standard flange

Ip Degree Of Protection:

IP54 shaft bushing without shaft seal ring: conforming to EN/IEC 60034-5 || IP65 motor: conforming to EN/IEC 60034-5 || IP65 shaft bushing: conforming to EN/IEC 60034-5

Range Compatibility:

PacDrive 3

Maximum Axial Force Fa:

300 N