Schneider Electric SH31404P11F1000 Sh3 Motor 140.4 Key Sgl Brk Str Ip54
SKU:
SH31404P11F1000
UPC:
3606481973139
MPN:
Condition:
New
Nominal Torque:
30.2 N.m 115 V single phase || 26.3 N.m 230 V single phase || 12.9 N.m 400 V three phase || 11.1 N.m 480 V three phase
Torque Constant:
1.57 N.m/A 120 °C
Range Compatibility:
PacDrive 3
Mercury Free:
Yes
Maximum Radial Force Fr:
2660 N 1000 rpm || 2110 N 2000 rpm || 1840 N 3000 rpm
Stator Inductance:
5.945 mH
Length:
420.5 mm
Rohs Exemption Information:
Yes
Peak Stall Torque:
131.9 N.m 115...480 V three phase
Phase:
three phase
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Shaft Length:
50 mm
Continuous Power:
4040 W
Centring Collar Depth:
3.5 mm
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Type Of Cooling:
natural convection
Motor Flange Size:
140 mm
Maximum Current Irms:
95.6 A
Product Or Component Type:
servo motor
Mounting Holes Diameter:
11 mm
Key Width:
8 mm
Shaft Diameter:
24 mm
Back Emf Constant:
104 V/krpm 20 °C
Environmental Disclosure:
ENVPEP111049EN
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Stator Resistance:
0.28 Ohm
Holding Brake:
with
Nominal Output Power:
2370 W 115 V single phase || 4130 W 230 V single phase || 4040 W 400 V three phase || 4190 W 480 V three phase
Number Of Motor Poles:
5
Maximum Mechanical Speed:
4000 rpm
Sustainable Offer Status:
Green Premium product
Continuous Stall Current:
21.3 A
Warranty:
18 months
Centring Collar Diameter:
130 mm
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Speed Feedback Resolution:
128 periods
Continuous Stall Torque:
33.4 N.m 115...480 V three phase
Pvc Free:
Yes
Nominal Speed:
750 rpm 115 V single phase || 1500 rpm 230 V single phase || 3000 rpm 400 V three phase || 3600 rpm 480 V three phase
Mounting Support:
international standard flange
Number Of Mounting Holes:
4
Shaft End:
parallel key
China Rohs Regulation:
X
Rotor Inertia:
29.2 kg.cm²
Circle Diameter Of The Mounting Holes:
165 mm
Ip Degree Of Protection:
shaft bushing without shaft seal ring IP54 EN/IEC 60034-5 || motor IP65 EN/IEC 60034-5 || shaft bushing IP65 EN/IEC 60034-5
