Schneider Electric SH32051P12F1000 Sh3 Motor 205.1 Key Mlt Brk Str Ip54
SKU:
SH32051P12F1000
UPC:
3.60648E+12
MPN:
Condition:
New
Length:
370.5 mm
Circle Diameter Of The Mounting Holes:
215 mm
Continuous Stall Current:
21 A
Electrical Connection:
rotatable right angled connector
Nominal Speed:
750 rpm 115 V single phase || 1500 rpm 230 V single phase || 3000 rpm 400 V three phase || 3600 rpm 480 V three phase
Range Compatibility:
PacDrive 3
Mounting Support:
international standard flange
Maximum Current Irms:
87.2 A
Phase:
three phase
Continuous Power:
5500 W
Holding Brake:
with
Number Of Motor Poles:
5
Rotor Inertia:
87.4 kg.cm²
Rohs Exemption Information:
Yes
Shaft End:
parallel key
Maximum Axial Force Fa:
740 N
Key Width:
10 mm
Back Emf Constant:
104 V/krpm 20 °C
Stator Inductance:
8.7 mH
Number Of Mounting Holes:
4
Type Of Cooling:
natural convection
Nominal Output Power:
2510 W 115 V single phase || 4240 W 230 V single phase || 5500 W 400 V three phase || 5200 W 480 V three phase
Holding Torque:
80 N.m
Encoder Type:
absolute multiturn SinCos Hiperface
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Nominal Torque:
31.9 N.m 115 V single phase || 27 N.m 230 V single phase || 17.5 N.m 400 V three phase || 13.8 N.m 480 V three phase
Shaft Length:
80 mm
[Us] Rated Supply Voltage:
115...480 V
Stator Resistance:
0.3 Ohm
Net Weight:
38.6 kg
Product Or Component Type:
servo motor
Ip Degree Of Protection:
shaft bushing without shaft seal ring IP54 EN/IEC 60034-5 || motor IP65 EN/IEC 60034-5 || shaft bushing IP65 EN/IEC 60034-5
Speed Feedback Resolution:
128 periods
Mounting Holes Diameter:
14 mm
Environmental Disclosure:
ENVPEP111049EN
Maximum Radial Force Fr:
3730 N 1000 rpm || 2960 N 2000 rpm || 2580 N 3000 rpm
Centring Collar Depth:
4 mm
Continuous Stall Torque:
36.9 N.m 115...480 V three phase
Peak Stall Torque:
110 N.m 115...480 V three phase
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
