Schneider Electric SH32052P12A1100 Sh3 Motor 205.2 Key Mlt Str Ip65
SKU:
SH32052P12A1100
UPC:
3.60648E+12
MPN:
Condition:
New
Sustainable Offer Status:
Green Premium product
Maximum Current Irms:
96.8 A
Length:
405 mm
Centring Collar Diameter:
180 mm
Motor Flange Size:
205 mm
Rotor Inertia:
129 kg.cm²
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Rohs Exemption Information:
Yes
Nominal Speed:
500 rpm 115 V single phase || 1000 rpm 230 V single phase || 2000 rpm 400 V three phase || 2400 rpm 480 V three phase
Ip Degree Of Protection:
motor IP65 EN/IEC 60034-5 || shaft bushing IP65 EN/IEC 60034-5
Pvc Free:
Yes
Product Or Component Type:
servo motor
Phase:
three phase
Peak Stall Torque:
220 N.m 115...480 V three phase
Warranty:
18 months
Type Of Cooling:
natural convection
Continuous Power:
7900 W
Net Weight:
50 kg
Holding Brake:
without
Device Short Name:
SH3.....P
Maximum Radial Force Fr:
4200 N 1000 rpm || 3330 N 2000 rpm || 2910 N 3000 rpm
Stator Resistance:
0.3 Ohm
Mounting Support:
international standard flange
[Us] Rated Supply Voltage:
115...480 V
Stator Inductance:
8.2 mH
Number Of Mounting Holes:
4
Environmental Disclosure:
ENVPEP111049EN
Electrical Connection:
rotatable right angled connector
Key Width:
10 mm
Encoder Type:
absolute multiturn SinCos Hiperface
Continuous Stall Current:
25.7 A
Shaft Diameter:
38 mm
Range Compatibility:
PacDrive 3
Mercury Free:
Yes
Circle Diameter Of The Mounting Holes:
215 mm
Continuous Stall Torque:
64.9 N.m 115...480 V three phase
Shaft End:
parallel key
Nominal Output Power:
3230 W 115 V single phase || 5860 W 230 V single phase || 7980 W 400 V three phase || 7140 W 480 V three phase
Maximum Axial Force Fa:
740 N
China Rohs Regulation:
X
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Mounting Holes Diameter:
14 mm
Speed Feedback Resolution:
128 periods
Torque Constant:
2.58 N.m/A 120 °C
Centring Collar Depth:
4 mm
Shaft Length:
80 mm
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Circularity Profile:
N/A
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Back Emf Constant:
161 V/krpm 20 °C
Nominal Torque:
61.6 N.m 115 V single phase || 56 N.m 230 V single phase || 38.1 N.m 400 V three phase || 28.4 N.m 480 V three phase
