Schneider Electric SH32053P12A1100 Sh3 Motor 205.3 Key Mlt Str Ip65
SKU:
SH32053P12A1100
UPC:
3.60648E+12
MPN:
Condition:
New
Device Short Name:
SH3.....P
Net Weight:
67 kg
Pvc Free:
Yes
Rotor Inertia:
190 kg.cm²
Maximum Mechanical Speed:
3800 rpm
Electrical Connection:
rotatable right angled connector
Peak Stall Torque:
330 N.m 115...480 V three phase
Shaft End:
parallel key
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Mounting Holes Diameter:
14 mm
Product Or Component Type:
servo motor
Ip Degree Of Protection:
motor IP65 EN/IEC 60034-5 || shaft bushing IP65 EN/IEC 60034-5
China Rohs Regulation:
X
Holding Brake:
without
Maximum Radial Force Fr:
4500 N 1000 rpm || 3570 N 2000 rpm || 3120 N 3000 rpm
[Us] Rated Supply Voltage:
115...480 V
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Motor Flange Size:
205 mm
Centring Collar Depth:
4 mm
Encoder Type:
absolute multiturn SinCos Hiperface
Continuous Stall Current:
33.2 A
Number Of Motor Poles:
5
Length:
489 mm
Continuous Stall Torque:
94.4 N.m 115...480 V three phase
Environmental Disclosure:
ENVPEP111049EN
Nominal Torque:
84.9 N.m 115 V single phase || 74.4 N.m 230 V single phase || 50.7 N.m 400 V three phase || 40.2 N.m 480 V three phase
Type Of Cooling:
natural convection
Key Width:
10 mm
Number Of Mounting Holes:
4
Stator Inductance:
6.3 mH
Shaft Length:
80 mm
Phase:
three phase
Warranty:
18 months
Centring Collar Diameter:
180 mm
Maximum Current Irms:
136.1 A
Rohs Exemption Information:
Yes
Speed Feedback Resolution:
128 periods
Circularity Profile:
N/A
Sustainable Offer Status:
Green Premium product
Nominal Speed:
500 rpm 115 V single phase || 1000 rpm 230 V single phase || 2000 rpm 400 V three phase || 2400 rpm 480 V three phase
Continuous Power:
10600 W
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Circle Diameter Of The Mounting Holes:
215 mm
Torque Constant:
2.76 N.m/A 120 °C
Shaft Diameter:
38 mm
Nominal Output Power:
4450 W 115 V single phase || 7790 W 230 V single phase || 10620 W 400 V three phase || 10100 W 480 V three phase
