Schneider Electric

Schneider Electric SSL1D03JDPV Ssr,3.5A@1-24Vdc,3-12Vdc, Screw Pack of 30

(No reviews yet) Write a Review
SKU:
SSL1D03JDPV
UPC:
3606489562939
Condition:
New
Warranty:
18 Months
Response Time:
0.12 ms (turn-off) || 0.1 ms (turn-on)
Product Or Component Type:
solid state relay up to 10 A
Output Switching Mode:
DC switching
Height:
96.5 mm
Output Voltage:
1...24 V DC
Reach Free Of Svhc:
Yes
Range Of Product:
Harmony Solid State Relays
Minimum Switching Voltage:
4 V DC turn-on
Width:
6.2 mm
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Reach Regulation:
Free of Substances of Very High Concern above the threshold
Maximum Voltage Drop:
<0.5 V on-state
Solid State Output Type:
Mosfet output || DC switching
Ip Degree Of Protection:
IP20
China Rohs Regulation:
X
Overvoltage Category:
III
Surge Current:
9 A 10 ms
Device Short Name:
SSL
Depth:
79.5 mm
Pollution Degree:
2
Product Certifications:
UL || CSA || CE || UL 508 || CSA22.2 No. 14-10 || GOST
Load Current:
0.001-3.5 A
Maximum Switching Voltage:
1 V DC turn-off
Standards:
IEC 60950-1 || IEC 61000 || IEC 62314 || IEC 61984 || EN 61984
Marking:
cURus || CSA || CE || EAC
Flame Retardance:
V0 conforming to UL 94
Environmental Disclosure:
ENVPEP1405004EN
Input Impedance:
500 Ohm
Ambient Air Temperature For Operation:
-20-70 °C
Dielectric Strength:
2500 V for input/output
Sustainable Offer Status:
Green Premium product
Absolute Maximum Voltage:
30 V DC
Phase:
1 phase
Tightening Torque:
< 0.5 N.m || 4.4 lb-in
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Maximum Leakage Current:
0.001 mA off-state
Ambient Air Temperature For Storage:
-20-85 °C
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Line Rated Current:
3.5 A
Mercury Free:
Yes
Net Weight:
0.0285 kg
Capacitance Unbalance:
1.5 pF input/output
Connections - Terminals:
flexible cable with cable end, 0.2...2.5 mm² AWG 24...AWG 14) || solid cable with cable end, 0.2...2.5 mm² AWG 24...AWG 14)
Mounting Support:
screw socket
Rohs Exemption Information:
Yes
Circularity Profile:
ENVEOLI1405004EN
Brochure:
View
Catalog:
View
Datasheet:
View
$1,136.10

Description

This slim interface solid state relay belongs to the Schneider Electric Harmony solid state relays range. This is a pre-assembled relay mounted on a socket that has a built-in reverse polarity protection circuit and a LED indicator. This is a 3.5A DC switching slim relay with 4Vdc to 12Vdc input and 1Vdc to 24Vdc output. This pre-assembled relay is a ready-to-go package saving assembly time. This 6mm relay has an IP67 water resistant encapsulation and a IP20 socket protection. The relay socket connection is by screw connector type with a lever for locking or releasing the relay. This SSL weighs 0.033Kg. It is the ideal solution for packaging, HVAC, injection molding, textile machines, medical equipment, and heating control applications. It conforms to international standard and certifications like IEC, UL, CSA, CE, ROHS, GOST, EN, and REACH. It is sold in lots of 30. Thiss is a complete range of control input and load output configurations for both AC and DC switching applications. The pre-assembled range in SSL brings you easier selection, time-saving in installation and robustness.
View AllClose

Related Products

Related Products