Schneider Electric STBAVI1255K Analog 0-10V In 2Ch Base Kit Conns,Base

(No reviews yet) Write a Review

Write a Review

Schneider Electric STBAVI1255K Analog 0-10V In 2Ch Base Kit Conns,Base

Rating Required Select Rating 1 star (worst) 2 stars 3 stars (average) 4 stars 5 stars (best)

Name

Email Required

Review Subject Required

Comments Required

SKU:

STBAVI1255K

UPC:

3595863948912

MPN:

Condition:

New

Overvoltage Category:

II

Range Of Product:

Modicon STB distributed I/O solution

Eu Rohs Directive:

Pro-active compliance (Product out of EU RoHS legal scope)

Data Format:

EN 61131-2 || IEC 61131-2

Insulation Between Channels And Logic Bus:

1500 V for 1 minute

Operating Altitude:

<= 6561.68 ft (2000 m)

Hot Swapping Fallback:

no for basic NIMs

Marking:

CE

Insulation Between Channels And Sensor Bus:

30 V

Addressing Requirement:

2 input words

Analogue Input Number:

2

Mercury Free:

Yes

Type Of Filter:

single low pass input filter 25 Hz

Absolute Accuracy Error:

+/- 0.5 % of full scale 25 °C

Relative Humidity:

95-95 % 60-60 °C without condensation

Analogue Input Resolution:

10 bits

Cold Swapping:

yes

Maximum Supply Current For Sensors:

100 mA per input channels

Vibration Resistance:

+/-0.35 mm 10-58 Hz || 3 gn 58-150 Hz 35 x 7.5 mm symmetrical DIN rail || 5 gn 58-150 Hz 35 x 15 mm symmetrical DIN rail

Temperature Drift:

+/-0.01 %/°C

Update Time:

10 ms

Absolute Maximum Input:

50 V DC

Analogue Input Type:

voltage 0...10 V

Warranty:

18 months

Kit Composition:

STBAVI1255 module || STBXTS2100, 6-terminal spring clamp connector || STBXTS1100, 6-terminal screw type connector || STBXBA1000 base

Net Weight:

0.116 kg

[Us] Rated Supply Voltage:

24 V DC

Maximum Source Impedance:

1 kOhm

Rohs Exemption Information:

Yes

Differential Linearity:

monotonic

Ambient Air Temperature For Storage:

-40...185 °F without derating

Product Or Component Type:

basic analog input kit

Ambient Air Temperature For Operation:

32...140 °F without derating

Pollution Degree:

2 IEC 60664-1

Product Certifications:

FM Class 1 Division 2 || ATEX Cat 3G || UL || CSA || C-tick

Shock Resistance:

30 gn 11 ms IEC 88 reference 2-27

Ambient Air Temperature For Operation:

0-60 °C

China Rohs Regulation:

X

Status Led:

1 LED (Green) module status (RDY)

Ambient Air Temperature For Storage:

-40-85 °C without derating

Supply:

power distribution module

Product Compatibility:

mounting base STBXBA1000 || power distribution module STBPDT3100/3105

California Proposition 65:

WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Reach Regulation:

Reference contains Substances of Very High Concern above the threshold

Ip Degree Of Protection:

IP20 conforming to IEC 61131-2 class 1

Current Consumption:

30 mA 5 V DC logic bus

Input Impedance:

400 kOhm

Weee:

The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.

Integral Linearity:

+/- 0.2 %FS

Response Time:

5 ms