Schneider Electric STBDDO3605K 24Vdc Out 6Pt Basic Kit Conns,Base
SKU:
STBDDO3605K
UPC:
3.59586E+12
MPN:
Condition:
New
Supply:
power distribution module
Kit Composition:
STBDDO3605 module || STBXTS2100, 6-terminal spring clamp connector || STBXBA1000 base || STBXTS1100, 6-terminal screw type connector
Discrete Output Logic:
positive
Product Compatibility:
I/O base STBXBA1000 || power distribution module STBPDT3100/3105
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Ambient Air Temperature For Storage:
-40...185 °F without derating
Pollution Degree:
2 IEC 60664-1
Maximum Load Capacitance:
50 µF
Current Consumption:
90 mA 5 V DC logic bus
Standards:
IEC 61131-2
Ambient Air Temperature For Operation:
32...140 °F without derating
Operating Altitude:
<= 6561.68 ft (2000 m)
Discrete Output Current:
250 mA
Shock Resistance:
30 gn 11 ms IEC 88 reference 2-27
Hot Swapping Fallback:
no for basic NIMs
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Mercury Free:
Yes
Discrete Output Number:
6
Range Of Product:
Modicon STB distributed I/O solution
Vibration Resistance:
3 gn 58-150 Hz 35 x 7.5 mm symmetrical DIN rail || 5 gn 58-150 Hz 35 x 15 mm symmetrical DIN rail || +/-0.35 mm 10-58 Hz
Rohs Exemption Information:
Yes
Marking:
CE
Ambient Air Temperature For Storage:
-40-85 °C without derating
Warranty:
18 months
Discrete Output Type:
solid state
Status Led:
1 LED (Green) module status (RDY) || 1 LED per channel (Green) channel status (OUT1 to OUT6)
Surge Current:
2.5 A 0.5 ms
Ambient Air Temperature For Operation:
0-60 °C without derating)
Cold Swapping:
yes
Insulation Between Channels And Logic Bus:
1500 V for 1 minute
Ip Degree Of Protection:
IP20 conforming to IEC 61131-2 class 1
Output Voltage:
19.2...30 V DC
Height:
13.9 mm
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Depth:
70 mm
Reset:
manual or automatic reset COM fault
Product Or Component Type:
basic digital output kit
Product Certifications:
UL || CSA || FM Class 1 Division 2
Discrete Output Voltage Type:
DC
Maximum Leakage Current:
0.4 mA at state 0 30 V
Maximum Load Inductance:
500 mH 4 Hz
Discrete Output Voltage:
24 V
Response Time:
550 µs off-to-on || 900 µs on-to-off
China Rohs Regulation:
X
Relative Humidity:
95-95 % 60-60 °C without condensation
Absolute Maximum Voltage:
56 V 1.3 ms
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Protection Type:
power protection integrated fuse on PDM time lag 5 A || reverse polarity protection || short-circuit protection || thermal overload protection
This product is part of the Modicon STB range, an offer of modular distributed I/O. This standard discrete output kit has 6 discrete outputs with solid state relay. It is a discrete output kit with a...
This product is part of the Modicon STB range, an offer of modular distributed I/O. This standard discrete input kit has 6 discrete inputs with positive or negative logic. It is a discrete input kit...
This product is part of the Modicon STB range, an offer of modular distributed I/O. This basic discrete output kit has 16 discrete outputs with solid state output. It is a discrete output kit with a...
