Schneider Electric

Schneider Electric TM3AQ4 Module Tm3-4 Analog Outputs

(No reviews yet) Write a Review
SKU:
TM3AQ4
UPC:
3606480648984
Condition:
New
Immunity To Microbreaks:
10 ms
Analogue Input Resolution:
12 bits || 11 bits + sign
Mercury Free:
Yes
Electrical Connection:
11 x 2.5 mm² removable screw terminal block pitch 5.08 mm for outputs and supply
Rohs Exemption Information:
Yes
Vibration Resistance:
3.5 mm 5-8.4 Hz DIN rail || 3 gn 8.4-150 Hz DIN rail
China Rohs Regulation:
X
Pvc Free:
Yes
Absolute Accuracy Error:
+/- 1 % of full scale || +/- 0.2 % of full scale at 25 °C
Repeat Accuracy:
+/- 0.4 %FS
Analogue Output Resolution:
11 bits + sign || 12 bits
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Ambient Air Temperature For Operation:
-10-55 °C horizontal installation || -10-35 °C vertical installation
Relative Humidity:
10-95 %, without condensation in operation) || 10-95 %, without condensation in storage)
Environmental Disclosure:
ENVPEP1402009EN
Toxic Heavy Metal Free:
Yes
Sustainable Offer Status:
Green Premium product
Height:
90 mm
Lsb Value:
2.44 mV 0...10 V voltage || 4.88 mV - 10...10 V voltage || 4.88 µA 0...20 mA current || 3.91 µA 4...20 mA current
Product Or Component Type:
analog output module
[Us] Rated Supply Voltage:
24 V DC
Standards:
IEC 61131-2
Analogue Output Type:
current 4...20 mA || current 0...20 mA || voltage 0...10 V || voltage - 10...10 V
Mounting Support:
top hat type TH35-15 rail IEC 60715 || top hat type TH35-7.5 rail IEC 60715 || plate or panel with fixing kit
Product Certifications:
CE || UKCA || RCM || EAC || cULus || cULus HazLoc
Resistance To Fast Transients:
1 kV IEC 61000-4-4 I/O)
Ip Degree Of Protection:
IP20
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Type Of Cable:
twisted shielded pairs cable <30 m output
Supply Voltage Limits:
20.4-28.8 V
Stabilisation Time:
1 ms
Output Ripple:
20 mV
Pollution Degree:
2
Surge Withstand:
1 kV power supply common mode IEC 61000-4-5 || 0.5 kV power supply differential mode IEC 61000-4-5 || 1 kV output common mode IEC 61000-4-5
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Circularity Profile:
ENVEOLI1402009EN
Conversion Time:
1 ms + 1 ms per channel + 1 controller cycle time
Cross Talk:
<= 1 LSB
Net Weight:
0.115 kg
Local Signalling:
for PWR 1 LED (green)
Range Compatibility:
Modicon M221 || Modicon M241 || Modicon M251 || Modicon M262
Resistance To Magnetic Fields:
30 A/m IEC 61000-4-8
Resistance To Electromagnetic Fields:
10 V/m 80 MHz...1 GHz IEC 61000-4-3 || 3 V/m 1.4 GHz...2 GHz IEC 61000-4-3 || 1 V/m 2 GHz...3 GHz IEC 61000-4-3
Non-Linearity:
+/- 0.2 %FS
Ambient Air Temperature For Storage:
-25-70 °C
Load Impedance Ohmic:
1 kOhm voltage || 300 Ohm current
Width:
23.6 mm
Current Consumption:
40 mA 5 V DC via bus connector no load || 50 mA 5 V DC via bus connector full load || 50 mA 24 V DC via external supply no load || 125 mA 24 V DC via external supply full load
Marking:
CE
Depth:
70 mm
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Range Of Product:
Modicon TM3
Shock Resistance:
15 gn 11 ms
Resistance To Electrostatic Discharge:
8 kV in air IEC 61000-4-2 || 4 kV on contact IEC 61000-4-2
Load Type:
resistive
Temperature Drift:
+/- 0.01 %FS/°C
Storage Altitude:
0-3000 m
Operating Altitude:
0...6561.68 ft (0...2000 m)
Resistance To Conducted Disturbances:
10 V 0.15...80 MHz IEC 61000-4-6 || 3 V spot frequency (2, 3, 4, 6.2, 8.2, 12.6, 16.5, 18.8, 22, 25 MHz) Marine specification (LR, ABS, DNV, GL)
Insulation:
between output and supply 1500 V AC || between output and internal logic 500 V AC
Electromagnetic Emission:
radiated emissions 40 dBμV/m QP class A 10 m)30-230 MHz IEC 55011 || radiated emissions 47 dBμV/m QP class A 10 m)230-1000 MHz IEC 55011
Analogue Output Number:
4
Catalog:
View
Datasheet:
View
$328.75

Description

This product is part of the Modicon TM3 range, an offer of expansion I/O modules for Modicon M221, M241, M251 and M262. The analogue output module provides 4 outputs with 11bit + sign and 12bit resolution. It is an output module with a rated supply voltage of 24V DC and a current consumption of 125mA at 24V DC via external supply full load. This product is capable of controlling variable speed drives or any device equipped with a current or voltage input. There is an insulation between output and supply at 1500V AC, output and internal logic at 500V AC. It is furnished with removable screw terminal for electrical connection with 5.08mm pitch adjustment for outputs and supply. It is an IP20 rated product. Its dimensions are 23.6mm (Width) x 70mm (Depth) x 90mm (Height). It weighs 0.115kg. This product is certified by CE. It meets EN/IEC 61131-2 and EN/IEC 61010-2-201 standards. This module is compatible with Modicon M262, Modicon M241, Modicon M251 and Modicon M221 logic controller. It supports top hat type TH35-15, top hat type TH35-7.5 rail conforming to IEC 60715 and plate or panel with fixing kit mount. Modicon TM3 expansion modules have been designed with a simple interlocking assembly mechanism. A bus expansion connector is used to distribute data and the power supply when assembling the Modicon TM3 modules with logic controllers. Boost the performance of your controller with the Modicon TM3 I/O system specially designed for the Modicon M221, M241 and M251 logic controllers.
View AllClose

Related Products

Related Products