Schneider Electric

Schneider Electric TM3DM24RG Module Tm3-24 Io Relays Spring

(No reviews yet) Write a Review
SKU:
TM3DM24RG
UPC:
3.60648E+12
Condition:
New
Maximum Current Per Output Common:
0.291666666666667
Discrete Output Logic:
positive or negative
Operating Altitude:
0...6561.68 ft (0...2000 m)
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Insulation:
between input and internal logic 500 V AC || non-insulated between inputs || between input groups and output groups 1500 V AC || between open contact 750 V AC || between output and internal logic 500 V AC || non-insulated between outputs
China Rohs Regulation:
X
Height:
90 mm
Current State 1 Guaranteed:
>= 2.5 mA input)
Storage Altitude:
0-3000 m
Maximum Cable Distance Between Devices:
unshielded cable <30 m regular input
Discrete Output Type:
relay normally open
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Environmental Disclosure:
ENVPEP1402009EN
Shock Resistance:
15 gn 11 ms
Reach Regulation:
Free of Substances of Very High Concern above the threshold
Discrete Output Current:
2000 mA relay output
Sustainable Offer Status:
Green Premium product
Ip Degree Of Protection:
IP20 with protective cover in place
Resistance To Magnetic Fields:
30 A/m 50/60 Hz IEC 61000-4-8
Marking:
CE
Discrete Input Logic:
sink or source (positive/negative)
Vibration Resistance:
3.5 mm 5-8.4 Hz DIN rail || 3 gn 8.4-150 Hz DIN rail || 3.5 mm 5-8.4 Hz panel || 3 gn 8.4-150 Hz panel
Mounting Support:
top hat type TH35-15 rail IEC 60715 || top hat type TH35-7.5 rail IEC 60715 || plate or panel with fixing kit
Circularity Profile:
ENVEOLI1402009EN
Response Time:
4 ms (turn-on) || 4 ms (turn-off)
Electrical Connection:
17 x 1.5 mm² removable spring terminal block pitch 3.81 mm for inputs || 11 x 1.5 mm² removable spring terminal block pitch 3.81 mm for outputs
Voltage State 0 Guaranteed:
0...5 V input
Product Or Component Type:
discrete I/O module
Reach Free Of Svhc:
Yes
Mercury Free:
Yes
Mechanical Durability:
20000000 cycles
Pvc Free:
Yes
Current State 0 Guaranteed:
<= 1 mA input)
Current Consumption:
5 mA 5 V DC via bus connector at state off) || 0 mA 24 V DC via bus connector at state on) || 0 mA 24 V DC via bus connector at state off) || 65 mA 5 V DC via bus connector at state on)
Resistance To Fast Transients:
1 kV I/OIEC 61000-4-4 || 2 kV relay outputIEC 61000-4-4
Ambient Air Temperature For Storage:
-25-70 °C
Minimum Load:
10 mA 5 V DC relay output
Local Signalling:
for I/O state 1 LED per channel (green)
Discrete Input Current:
7 mA input
Discrete Output Number:
8
Range Compatibility:
Modicon M241 || Modicon M251 || Modicon M221 || Modicon M262
Toxic Heavy Metal Free:
Yes
Product Certifications:
cULus || CE || UKCA || RCM || EAC || cULus HazLoc
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Width:
42.9 mm
Discrete I/O Number:
24
Depth:
84.6 mm
Ambient Air Temperature For Operation:
-10-35 °C vertical installation || -10-55 °C horizontal installation
Resistance To Electrostatic Discharge:
8 kV in air IEC 61000-4-2 || 4 kV on contact IEC 61000-4-2
Relative Humidity:
10-95 %, without condensation in operation) || 10-95 %, without condensation in storage)
Discrete Input Number:
16 input IEC 61131-2 Type 1
Discrete Output Voltage:
24 V DC relay output || 240 V AC relay output
Discrete Input Voltage:
24 V
Pollution Degree:
2
Electromagnetic Emission:
radiated emissions 40 dBμV/m QP class A 10 m)30-230 MHz IEC 55011 || radiated emissions 47 dBμV/m QP class A 10 m)230-1000 MHz IEC 55011
Resistance To Conducted Disturbances:
10 V 0.15...80 MHz IEC 61000-4-6 || 3 V spot frequency (2, 3, 4, 6.2, 8.2, 12.6, 16.5, 18.8, 22, 25 MHz) Marine specification (LR, ABS, DNV, GL)
Rohs Exemption Information:
Yes
Range Of Product:
Modicon TM3
Voltage State 1 Guaranteed:
15...28.8 V input
Input Impedance:
3.4 kOhm
Standards:
IEC 61131-2
Resistance To Electromagnetic Fields:
10 V/m 80 MHz...1 GHz IEC 61000-4-3 || 3 V/m 1.4 GHz...2 GHz IEC 61000-4-3 || 1 V/m 2 GHz...3 GHz IEC 61000-4-3
Discrete Input Voltage Type:
DC
Surge Withstand:
2 kV output common mode IEC 61000-4-5 || 1 kV input common mode IEC 61000-4-5
Catalog:
View
Datasheet:
View
$273.75

Description

This product is part of the Modicon TM3 range, an offer of expansion I/O modules for Modicon M221, M241, M251 and M262. The discrete I/O module provides 16 input channels, 8 relay output channels with sink or source (positive/negative) discrete logic. It is an I/O module with a relay output voltage of 24V DC, 240V AC, a current consumption of 65mA, 5mA at 5V DC via bus connector. This product is capable of controlling variable speed drives or any device equipped with a current or voltage input. There is an Insulation between input/output and internal logic at 500V AC, input and output groups at 1500V AC, open contact at 750V AC and non-insulated between inputs/outputs. It is furnished with removable spring terminal for electrical connection with 3.81mm pitch adjustment for inputs and outputs. It is an IP20 rated product. Its dimensions are 42.9mm (Width) x 84.6mm (Depth) x 90mm (Height). It weighs 0.155kg. This product is certified by CE, CULus and C-Tick. It meets EN/IEC 61131-2 and EN/IEC 61010-2-201 standards. This module is compatible with Modicon M262, Modicon M241, Modicon M251 and Modicon M221 logic controller. It supports top hat type TH35-15, top hat type TH35-7.5 rail conforming to IEC 60715 and plate or panel with fixing kit mount. Modicon TM3 expansion modules have been designed with a simple interlocking assembly mechanism. A bus expansion connector is used to distribute data and the power supply when assembling the Modicon TM3 modules with logic controllers. Boost the performance of your controller with the Modicon TM3 I/O system specially designed for the Modicon M221, M241 and M251 logic controllers.
View AllClose