Schneider Electric

Schneider Electric VW3A3420 Encoder Interface Module Digital 5/12V E

(No reviews yet) Write a Review
SKU:
VW3A3420
UPC:
3606485441252
Condition:
New
Output Signal:
Clock+, Clock- SSI) || Data+, Data-, Clock+, Clock- EnDat 2.2)
[Us] Rated Supply Voltage:
5 V DC 4.75-5.25 V) || 12 V DC 11.4-12.6 V) || 24 V DC 22.8-25.2 V)
Rohs Exemption Information:
Yes
Circularity Profile:
N/A
Range Of Product:
Altivar
Maximum Cable Distance Between Devices:
100 m A/B/I) || 50 m SSI) || 100 m SSI)at 300 kHz || 50 m EnDat 2.2) || 100 m EnDat 2.2)with propagation delay compensation
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Product Or Component Type:
digital encoder interface module
Maximum Operating Frequency:
1000 kHz
Range Compatibility:
Altivar Process ATV900 || Altivar Process Modular || Altivar Machine ATV340
Connector Type:
1 female high density SUB-D 15
Encoder Type:
EnDat 2.2 || A/B/I incremental XCC1 type R || A/B/I incremental XCC1 type X || SSI absolute encoder XCC2 type SG || SSI absolute encoder XCC3 type SB
Net Weight:
0.15 kg
Sustainable Offer Status:
Green Premium product
Communication Port Protocol:
RS422
Input Impedance:
121 Ohm
China Rohs Regulation:
X
Pvc Free:
Yes
Input Signal:
Data+, Data- EnDat 2.2) || Data+, Data- SSI) || Temp+, Temp- || A+,A-/B+,B-/I+,I- A/B/I) || TTL
Protection Type:
short-circuit protection || overload protection
Maximum Supply Current:
0.25 A 5 V DC || 0.1 A 12 V DC || 0.1 A 24 V DC
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Mercury Free:
Yes
Environmental Disclosure:
ENVPEP2010009EN
Brochure:
View
Catalog:
View
Datasheet:
View
$148.56

Description

This digital encoder interface module is an option for variable speed drives of Altivar range. It is compatible with Altivar Machine ATV340 and Altivar Process ATV900 drives. It improves drive performance irrespective of the motor load state, zero speed torque, accurate speed regulation, torque accuracy, shorter response times on a torque surge, improved dynamic performance in transient state. It is protected against short circuits and overloads. It weighs 150g. It is used for Flux Vector Control operation with sensor (FVC mode) for asynchronous motors, or for Vector Control operation with speed feedback (FSY mode) for synchronous motors. It is inserted in a dedicated slot of the drive.
View AllClose