Description
Electrical Data
- Rated voltage (III / 3): 400 V
- Rated impulse voltage (III / 3): 6 kV
- Rated current: 10 A
- Legend (ratings): (III / 3) Overvoltage category III / Pollution degree 3
- Rated voltage UL (Use Group B): 300 V
- Rated current UL (Use Group B): 10 A
- Rated voltage UL (Use Group C): 300 V
- Rated current UL (Use Group C): 10 A
- Rated voltage UL (Use Group D): 300 V
- Rated current UL (Use Group D): 10 A
- Rated voltage CSA (Use Group B): 600 V
- Rated current CSA (Use Group B): 10 A
- Rated voltage CSA (Use Group C): 600 V
- Rated current CSA (Use Group C): 10 A
Connection Data
- Connection technology: Push-in CAGE CLAMP<sup></sup>
- Actuation type: Operating tool
- Connectable conductor materials: Copper
- Nominal cross section: 2.5 mm
- Solid conductor: 0.25 4 mm / 22 12 AWG
- Solid conductor, push-in termination: 0.75 4 mm / 18 12 AWG
- Fine-stranded conductor: 0.25 4 mm / 22 12 AWG
- Fine-stranded conductor with ferrule with plastic collar: 1 2.5 mm / 18 12 AWG
- Fine-stranded conductor with ferrule, push-in termination, from: 1 2.5 mm / 18 12 AWG
- Strip length: 10 12 mm / 0.39 0.47 inch
- Total number of connection points: 3
- Total number of potentials: 2
- Number of levels: 1
- Type of wiring: Front-entry wiring
- Note (conductor cross-section): Depending on the conductor characteristic, a conductor with a smaller cross section can also be inserted via push-in termination.
- Number of jumper slots: 2
Geometrical Data
- Width: 5.2 mm / 0.205 inch
- Height from upper-edge of DIN-35 rail: 32.9 mm / 1.295 inch
- Depth: 76.8 mm / 3.024 inch
Mechanical Data
- Design: horizontal
- Type of mounting: DIN-35 rail
- Marking level: Center/side marking
Material Data
- Color: gray
- Insulating material: Polyamide 66 (PA 66)
- Fire load: 0.172 MJ
- Weight: 8.169 g
Commercial data
- Packaging type: BOX
- Country of origin: CN
- GTIN: 4050821707592
- Customs Tariff No.: 85369095990
The WAGO 2002 TOPJOB S series is a gray feed-through terminal block featuring a single deck with a mini blade-style fused-disconnect, side and center marking slots, and a test point. It accommodates one disconnect feed-through pole and three wires (one push-in and two push-in) with a nominal cross-section of 2.5mm², suitable for wire sizes ranging from 0.25mm² to 4mm² or #22AWG to #12AWG. The terminal block supports a rated current of 10A and utilizes Push-in CAGE CLAMP spring connections for secure wiring. It is designed for DIN-35 rail mounting and has a width of 5.2mm, equivalent to model number 20021781.
