dielectric strength control load circuit ac 1 min:
2.5 kVrms
fine stranded conductor:
0.34 2.5 mm / 22 14 AWG
fire load:
0.682 MJ
height from upper edge of din rail:
54 mm / 2.126 inch
input voltage range high level:
DC 18 30 V
input voltage range low level:
DC 0 8 V
limiting continuous current:
3.5 A
mounting type:
DIN-35 rail
nominal input current at un:
7 mA
nominal input voltage un:
DC 24 V
nominal output voltage:
DC 24 V
note:
Optocouplers and solid state relays are designed for use in signal processing networks, which are not supplied by the low-voltage power supply networks.
output voltage range:
DC 0 24 V
packaging type:
Box
pollution degree:
2
processing temperature:
-25 +50 C
protection type:
IP20
solid conductor:
0.34 2.5 mm / 22 14 AWG
standards specifications:
EN 61000-6-2 || EN 61000-6-3 || EN 61373 || EN 61010-2-201 || UL 508
3-conductor ground terminal block; with lever and Push-in CAGE CLAMP; 4 mm²; with test port; side and center marking; for DIN-rail 35 x 15 and 35 x 7.5; Push-in CAGE CLAMP; 4,00 mm²; green-yellow