WAGO 260-253 4-conductor terminal strip; 3-pole; without push-buttons; with snap-in mounting feet; for plate thickness 0.6 - 1.2 mm; Fixing hole 3.5 mm Ø; 1.5 mm²; CAGE CLAMP; 1,50 mm²; gray

4-conductor terminal strip; with snap-in mounting feet; for plate thickness 0.6 - 1.2 mm; Fixing hole 3.5 mm ; also fits 210-154 aluminum rail or with 209-123 mounting carrier for DIN 35 rail; 3-pole

Electrical Data

• Rated voltage (III / 3): 400 V
• Rated impulse voltage (III / 3): 6 kV
• Rated current: 18 A
• Legend (ratings): (III / 3) Overvoltage category III / Pollution degree 3

Connection Data

• Connection technology: CAGE CLAMP
• Actuation type: Operating tool
• Connectable conductor materials: Copper
• Solid conductor: 0.08 1.5 mm / 28 16 AWG
• Fine-stranded conductor: 0.08 1.5 mm / 28 16 AWG
• Strip length: 8 9 mm / 0.31 0.35 inch
• No. of poles: 3
• Total number of connection points: 12
• Total number of potentials: 3
• Number of levels: 1
• Type of wiring: Side-entry wiring

Geometrical Data

• Width: 28.4 mm / 1.118 inch
• Height from the surface: 17 mm / 0.669 inch
• Depth: 25 mm / 0.984 inch
• Module width: 8 mm / 0.315 inch

Mechanical Data

• Design: horizontal
• Mounting type: Snap-in mounting foot
• Marking level: Side marking

Material Data

• Color: gray
• Fire load: 0.152 MJ
• Weight: 8.720 g

Commercial data

• Packaging type: BOX
• Country of origin: DE
• GTIN: 4044918604239
• Customs Tariff No.: 85369010000

.

The WAGO 260 series feed-through terminal strip is a gray, 1-deck/level component with snap-in mounting feet, featuring 3 feed-through poles and 16 wire connections (8 clamps on each side). It supports wire sizes from 0.08mm² to 1.5mm² (#28AWG to #16AWG) and is rated for a current of 18A. The terminal strip uses CAGE CLAMP spring connections and can be mounted on a DIN rail or surface using an accessory snap-in foot mounting. It is equivalent to the model 260253.