WAGO 264-347 4-conductor terminal block; without push-buttons; with snap-in mounting foot; for plate thickness 0.6 - 1.2 mm; Fixing hole 3.5 mm Ã; 2.5 mm²; CAGE CLAMP; 2,50 mm²; green-yellow
Wago
$2.20
(No reviews yet)
Write a Review
Write a Review
Wago
WAGO 264-347 4-conductor terminal block; without push-buttons; with snap-in mounting foot; for plate thickness 0.6 - 1.2 mm; Fixing hole 3.5 mm Ã; 2.5 mm²; CAGE CLAMP; 2,50 mm²; green-yellow
4-conductor terminal block; without push-buttons; with snap-in mounting foot; 1-pole; for plate thickness 0.6 - 1.2 mm; Fixing hole 3.5 mm Ã; 2.5 mm²; CAGE CLAMP; 2,50 mm²; green-yellow.
The WAGO 264 series feed-through/thru ground/earthing terminal block features a single deck/level design with a snap-in mounting foot and center marking slot. It is green-yellow in color and supports one grounding/protective-earth (1PE) connection for up to four wires using two clamps on each side (2+2 configuration). It accommodates wire sizes ranging from 0.08mm² to 2.5mm² or #28AWG to #12AWG and utilizes CAGE CLAMP spring connections. The terminal block can be mounted on a DIN rail or surface using an accessory snap-in foot mounting, with a width of 10mm, and is equivalent to model 264347.
- actuation type:
- Operating tool
- color:
- Green-yellow
- connectable conductor materials:
- Copper
- connection technology:
- CAGE CLAMP
- country of origin sales organisation germany:
- CH
- depth:
- 32 mm / 1.26 inch
- design:
- Horizontal type
- fine stranded conductor:
- 0.08 2.5 mm / 28 12 AWG
- fire load:
- 0.117 MJ
- flammability class per ul94:
- V0
- height from the surface:
- 22.1 mm / 0.87 inch
- insulation material:
- Polyamide (PA66)
- marking level:
- Center marking
- mounting type:
- Snap-in foot
- note conductor cross section:
- 12 AWG: THHN, THWN
- packaging type:
- Box
- solid conductor:
- 0.08 2.5 mm / 28 12 AWG
- strip length:
- 8 9 mm / 0.31 0.35 inch
- weight:
- 6.380 g
- width:
- 10 mm / 0.394 inch
- wiring direction:
- Front-entry wiring
