Description
4-conductor through terminal block; 1.5 mm®; center marking; for DIN-rail 35 x 15 and 35 x 7.5; CAGE CLAMPp>
View AllClose
Electrical Data
- Rated voltage (III / 3): 800 V
- Rated impulse voltage (III / 3): 8 kV
- Rated current: 18 A
- Legend (ratings): (III / 3) Overvoltage category III / Pollution degree 3
Connection Data
- Connection technology: CAGE CLAMP<sup></sup>
- Actuation type: Operating tool
- Connectable conductor materials: Copper
- Solid conductor: 0.08 1.5 mm / 28 16 AWG
- Fine-stranded conductor: 0.08 1.5 mm / 28 16 AWG
- Strip length: 8 9 mm / 0.31 0.35 inch
- Total number of connection points: 4
- Total number of potentials: 1
- Number of levels: 1
- Type of wiring: Front-entry wiring
Geometrical Data
- Width: 4 mm / 0.157 inch
- Height from upper-edge of DIN-35 rail: 27 mm / 1.063 inch
- Depth: 73 mm / 2.874 inch
Mechanical Data
- Design: horizontal
- Type of mounting: DIN-35 rail
- Marking level: Center marking
Material Data
- Color: red
- Insulating material: Polyamide 66 (PA 66)
- Fire load: 0.116 MJ
- Weight: 6.310 g
Commercial data
- Packaging type: BOX
- Country of origin: DE
- GTIN: 4044918520522
- Customs Tariff No.: 85369010000
The WAGO 279 series feed-through terminal block is a red, single-deck component with a center marking slot, designed for one feed-through pole and accommodating four wires using two clamps on each side. It supports wire sizes from 0.08mm² to 1.5mm² or #28AWG to #16AWG, with a rated current of 18A. The terminal block features CAGE CLAMP spring connections and is mounted on a DIN-35 rail (35 x 15 / 35 x 7.5) with a 4mm width, equivalent to model 279833.
