Wago

WAGO 280-537

(No reviews yet) Write a Review
SKU:
280-537
MPN:
280-537
Condition:
New
actuation type:
Operating tool
connectable conductor materials note:
Terminating Aluminum ConductorsWAGO spring clamp terminal blocks are suitable for solid aluminum conductors up to 4 mm/12 AWG if WAGO Alu-Plus Contact Paste is used for termination.Alu-Plus Contact Paste Advantages:Automatically
color:
Green-yellow/blue
connectable conductor materials:
Copper || Aluminum
connection technology:
CAGE CLAMP
country of origin sales organisation germany:
DE
depth from upper edge of din rail:
58.5 mm / 2.303 inch
design:
Horizontal type
fine stranded conductor:
0.08 2.5 mm / 28 12 AWG
fire load:
0.098 MJ
flammability class per ul94:
V0
height:
64 mm / 2.52 inch
insulation material:
Polyamide (PA66)
legend ratings:
(III / 3) Overvoltage category III / Pollution degree 3
marking level:
Center marking
mounting type:
DIN-35 rail
nominal voltage iii 3:
500 V
note conductor cross section:
12 AWG: THHN, THWN
packaging type:
Box
rated current:
20 A
rated surge voltage iii 3:
6 kV
ratings per:
IEC/EN 60947-7-1
solid conductor:
0.08 2.5 mm / 28 12 AWG
strip length:
8 9 mm / 0.31 0.35 inch
weight:
13.781 g
width:
5 mm / 0.197 inch
wiring direction:
Front-entry wiring
  • Wago 280-537
  • Wago 280-537
  • Wago 280-537
$11.59

Description

Double-deck terminal block; Ground conductor/through terminal block; with marker carrier; for DIN-rail 35 x 15 and 35 x 7.5; 2.5 mm®; CAGE CLAMPp>
  • Automatically destroys the oxide film during clamping.
  • Prevents fresh oxidation at the clamping point.
  • Prevents electrolytic corrosion between aluminum and copper conductors (in the same terminal block).
  • Provides long-term protection against corrosion.
.

The WAGO 280 series terminal block is a double-deck feed-through and ground/earthing terminal block with a center marking slot, designed for use with 0.08mm² to 2.5mm² wires (#28AWG to #12AWG). It features a green-yellow and blue color scheme for neutral-through and protective-earth connections, respectively, and accommodates 2 x 2 wires with 2 clamps each. Rated for a current of 20A, it utilizes CAGE CLAMP spring connections and mounts on a DIN-35 rail (35 x 15 / 35 x 7.5) with a 5mm width, equivalent to model 280537.

View AllClose