WAGO 280-675
Wago
$6.41
Double potential terminal block; 2.5 mm; center marking; for DIN-rail 35 x 15 and 35 x 7.5; CAGE CLAMPp>
- Automatically destroys the oxide film during clamping.
- Prevents fresh oxidation at the clamping point.
- Prevents electrolytic corrosion between aluminum and copper conductors (in the same terminal block).
- Provides long-term protection against corrosion.
The WAGO 280 series double potential feed-through terminal block is a gray, 1-deck/level component with a center marking slot, designed for two feed-through poles and six wires (three clamps on each side). It accommodates wire sizes from 0.08mm² to 2.5mm² or #28AWG to #12AWG and supports a rated current of 18A. The terminal block features CAGE CLAMP spring connections and is mounted on a DIN-35 rail (35 x 15 / 35 x 7.5) with a width of 5mm, equivalent to model 280675.
- actuation type:
- Operating tool
- connectable conductor materials note:
- Terminating Aluminum ConductorsWAGO spring clamp terminal blocks are suitable for solid aluminum conductors up to 4 mm/12 AWG if WAGO Alu-Plus Contact Paste is used for termination.Alu-Plus Contact Paste Advantages:Automatically
- color:
- Gray
- connectable conductor materials:
- Copper || Aluminum
- connection technology:
- CAGE CLAMP
- country of origin sales organisation germany:
- DE
- depth from upper edge of din rail:
- 28 mm / 1.102 inch
- design:
- Horizontal type
- fine stranded conductor:
- 0.08 2.5 mm / 28 12 AWG
- fire load:
- 0.189 MJ
- flammability class per ul94:
- V0
- height:
- 93 mm / 3.661 inch
- insulation material:
- Polyamide (PA66)
- legend ratings:
- (III / 3) Overvoltage category III / Pollution degree 3
- marking level:
- Center marking
- mounting type:
- DIN-35 rail
- nominal voltage iii 3:
- 800 V
- note conductor cross section:
- 12 AWG: THHN, THWN
- packaging type:
- Box
- rated current:
- 18 A
- rated surge voltage iii 3:
- 8 kV
- safety information 1:
- Notice: This 3-conductor double-potential terminal block cannot be commoned via adjacent jumpers.
- safety information 2:
- When used as disconnect terminal block or 500V/6kV/3 potential multiplier between the current bars.
- solid conductor:
- 0.08 2.5 mm / 28 12 AWG
- strip length:
- 8 9 mm / 0.31 0.35 inch
- weight:
- 12.400 g
- width:
- 5 mm / 0.197 inch
- wiring direction:
- Front-entry wiring
