2-conductor disconnect/test terminal block; with shield contact; with test port; for 2 mm and 3 mm test plugs; for DIN-rail 35 x 15 and 35 x 7.5; 2.5 mm; CAGE CLAMP
- Automatically destroys the oxide film during clamping.
- Prevents fresh oxidation at the clamping point.
- Prevents electrolytic corrosion between aluminum and copper conductors (in the same terminal block).
- Provides long-term protection against corrosion.
The WAGO 280 series feed-through disconnect/test terminal block is an orange, single-deck unit featuring a knife-disconnect, shield contact, and both side and center marking slots. It includes a test port and accommodates two wires (one clamp each) for wire sizes ranging from 0.08mm² to 2.5mm² (#28AWG to #12AWG). Rated for a current of 16A, it utilizes CAGE CLAMP spring connections and is designed for mounting on a DIN-35 rail (35 x 15 / 35 x 7.5) with a width of 5mm. This terminal block is equivalent to model 280880.
- actuation type:
- Operating tool
- connectable conductor materials note:
- Terminating Aluminum ConductorsWAGO spring clamp terminal blocks are suitable for solid aluminum conductors up to 4 mm/12 AWG if WAGO Alu-Plus Contact Paste is used for termination.Alu-Plus Contact Paste Advantages:Automatically
- color:
- Orange
- connectable conductor materials:
- Copper || Aluminum
- connection technology:
- CAGE CLAMP
- country of origin sales organisation germany:
- IN
- depth from upper edge of din rail:
- 28.5 mm / 1.122 inch
- design:
- Horizontal type
- fine stranded conductor:
- 0.08 2.5 mm / 28 12 AWG
- fire load:
- 0.148 MJ
- flammability class per ul94:
- V0
- height:
- 82 mm / 3.228 inch
- insulation material:
- Polyamide (PA66)
- legend ratings:
- (III / 3) Overvoltage category III / Pollution degree 3
- marking level:
- Center/side marking
- mounting type:
- DIN-35 rail
- nominal voltage iii 3:
- 250 V
- note conductor cross section:
- 12 AWG: THHN, THWN
- packaging type:
- Box
- rated current:
- 16 A
- rated surge voltage iii 3:
- 4 kV
- solid conductor:
- 0.08 2.5 mm / 28 12 AWG
- strip length:
- 8 9 mm / 0.31 0.35 inch
- weight:
- 10.184 g
- width:
- 5 mm / 0.197 inch
- wiring direction:
- Front-entry wiring
Related Products
-
-
-
WAGO 880-661
Wago
-
