Wago

WAGO 281-622/281-417

(No reviews yet) Write a Review
SKU:
281-622/281-417
MPN:
281-622/281-417
Condition:
New
actuation type:
Operating tool
connectable conductor materials note:
Terminating Aluminum ConductorsWAGO spring clamp terminal blocks are suitable for solid aluminum conductors up to 4 mm/12 AWG if WAGO Alu-Plus Contact Paste is used for termination.Alu-Plus Contact Paste Advantages:Automatically
type of fuse:
Cylindrical fuse 5 x 30 mm
color:
Gray
connectable conductor materials:
Copper || Aluminum
connection technology:
CAGE CLAMP
country of origin sales organisation germany:
DE
depth from upper edge of din rail:
60 mm / 2.362 inch
design:
Angled
fine stranded conductor:
0.08 4 mm / 28 12 AWG
fire load:
0.336 MJ
flammability class per ul94:
V0
height:
60 mm / 2.362 inch
insulation material:
Polyamide (PA66)
legend ratings:
(III / 3) Overvoltage category III / Pollution degree 3
marking level:
Center marking
mounting type:
DIN-35 rail
nominal voltage iii 3:
800 V
note on rated current 1:
Leakage current in case of a blown fuse: Neon lamp < 0.4 mA
operation status indicator:
230 V
packaging type:
Box
rated current:
0.416666666666667
rated surge voltage iii 3:
8 kV
ratings note:
Electrical ratings are given by the fuse and blown fuse indication.
ratings per:
IEC/EN 60947-7-3
solid conductor:
0.08 4 mm / 28 12 AWG
strip length:
9 10 mm / 0.35 0.39 inch
weight:
17.668 g
width:
8 mm / 0.315 inch
wiring direction:
Front-entry wiring
$18.20

Description

2-conductor fuse terminal block; with pivoting fuse holder; for 5 x 30 mm miniature metric fuse; with blown fuse indication by neon lamp; 230 V; for DIN-rail 35 x 15 and 35 x 7.5; 4 mm²; CAGE CLAMP; 4,00 mm²; gray.

The WAGO 281 series is a gray, single-pole feed-through terminal block with a fused-disconnect lever type for 5x30mm fuses and a blown-fuse neon indicator for 230Vdc. It features a center marking slot and accommodates two wires with CAGE CLAMP spring connections, suitable for wire sizes ranging from 0.08mm² to 4mm² or #28AWG to #12AWG. Rated for a current of 10A, it mounts on a DIN-35 rail (35 x 15 / 35 x 7.5) and has an 8mm width.

View AllClose